• Journal of Animal Science and Technology
• /
• v.54 no.1
• /
• pp.51-58
• /
• 2012

The purposes of the study were to examine the changes in carcass traits and surface meat color, and cortisol concentration by different altitudes and shipping distances for steer and cow. The experimental animals were shipped from Kangwondo, Kyunggido, Choongchungdo, and Kyungsangdo to Wonju LPC. The animals were examined for yield traits, quality traits, carcass grade, lightness, redness, yellowness, croma value, and cortisol concentration by different altitudes and shipping distances. The results showed that the carcass traits of steer like back fat thickness were not different by shipping distances of 100 km, 150 km, and 200 km. However, the fat thickness was higher in steers shipped from 250 km than 100 km, 150 km, and 200 km distance. Ribeye area was reduced significantly in 200 km and 250 km than 50 km. Yield index and yield grade were significantly low in 250 km than 50-200 km. However, meat color, fat color, texture, mature, and quality grade had no differences between shipping distances. Marbling score was not different in 50-200 km. However, the marbling score in 250 km was significantly lower than that of 50 km. In case of surface meat color by shipping distance, redness, yellowness, chroma value, and hue-angle were not different in shipping distance of 250 km. The lightness had similar result in 50-200 km. However, in case of 250 km the lightness was significantly low. The REA of cow carcass by shipping distance had no differences by shipping distance. The BET had similar results in 50-150 km. However, it had significantly thick in 200 km. The yield index and yield grade had no differences in 50-150 km. However, yield index and grade were significantly low in 200 km. The carcass trait of cow had no differences in all items by shipping distance. Although the carcass traits and the BET for steer by altitude had no differences between 100, 200, 300 and 500 m, but those were significantly thick in 400 m. And the yield index and the yield grade at altitude 400 m were lower than that of other altitudes. The quality traits and the quality grade had no differences between 100, 200, 300, 400, and 500 m altitudes. The yield traits, quality traits, yield grade, and quality grade had no significant differences by altitudes. In case of yield index of cow for 300 m was low than the cases of 100 m and 200 m. The surface meat color for steer and cow had no differences by altitudes. However, the lightness of cow had positive result in 100 m than 200 m and 300 m. In case of steer and cow the cortisol concentration by shipping distance was high as the shipping distances were longer. However, the cortisol concentrations of steer and cow by altitudes were decreased as the altitudes were increased. From the above results carcass traits and carcass grade were decreased and the cortisol concentration was increased as the altitudes were decreased for steer and cow.

• The Journal of Korean Society for Radiation Therapy
• /
• v.15 no.1
• /
• pp.29-33
• /
• 2003

I. Purpose Brachytherapy is the main component in treatment of patients with uterine cervical cancer. The reproducibility of applicator position in the same patient at repeated treatments was very important for accurate dose delivery. It was aimed to evaluate the change of applicator location between each high dose rate(HDR) brachytherapy insertion in the patients with uterine cervical cancer. II. Materials and Methods From January 1999 to October 2001, total 52 patients were treated with external beam radiotherapy and HDR brachytherapy (Microselectron, Nucletron). During six to seven times of brachytherapy, all patients had three treatment plans. From the orthogonal radiographs, we measured the following variables; height from upper border of pubic bone to os (HPO), distance from sacral promontory to tip of tandem (DST), distance from coccyx to os (DCO), distance from tip of right ovoid to os (DRO), distance from tip of left ovoid to os (DLO), and distance from center of the first tandem source to ovoid (DTO). To evaluate the reproducibility of applicator position, it was calculated the standard deviation of differences between three insertions for the 7 parameters in each patient. III. Results The ranges of standard deviations of interfractional differences for the variables were as follows. 1)HPO : $0{\sim}0.79cm$ 2)DST : $0{\sim}0.9cm$ 3)DCO : $0.06{\sim}0.76cm$ 4)DRO : $0{\sim}0.53cm$ 5)DLO : $0{\sim}0.45cm$ 6) DTO $0{\sim}0.36cm$ IV. Conclusions There was some change in applicator position on repeated implants in our study. But variation of the interfractional differences was minimal; in all parameters, there were less than 1 cm. We are continued to try for reducing the geometric variation between each procedure.

• Journal of Science Education
• /
• v.38 no.3
• /
• pp.641-656
• /
• 2014

This study aimed at analyzing visual materials included in school science textbooks, specifically the textbooks for first semester courses of 3rd to 6th graders. The purpose was to provide directions for future textbooks by understanding the functions of the images in both pedagogical and social perspectives as well. The study was conducted by investigating the types, roles and socio-semiotic features of the images in science textbooks. The results were as follows. Firstly, the most used types of images in 2007 curriculum textbooks were photographs and drawn pictures. Uses of other visual aids than above were extremely rare. It was also found that as the educational level rises, the use of images for decorative functions drastically declined. The majority of the images were used in providing supplementary explanations or examples. This implies that the images effectively play the role of helping science education. In addition, more use of worksheets images was found, indicating that as educational level increases, students participate more actively in research sessions or data analysis. In socio-semiotic perspective, visual images showed high accessibility to students in 'Type of visual image', 'Function of visual image', 'Distance of shot', 'Horizontal angle of shot', 'Color moduation'. It was implied that there will a close correlation between the type, role and the socio-semiotic characteristics of visual images in textbooks. For example, photograph-type visuals were mostly used as supplementary references. And when applying the socio-semiotic analysis to photograph-type visuals, they showed 'real type', 'narrative-metaphor type', and 'shadow effect' among socio-semiotic features. Such correlations implied that knowing the type of the visual image may help determining the role of the image in the textbook to some extent, and also corresponding socio-semiotic characteristics. As a result, it was possible to infer how accessible certain visual images are to students. The above results have implications for the effective use of visual images in future textbooks.

• Radiation Oncology Journal
• /
• v.19 no.1
• /
• pp.74-80
• /
• 2001

Purpose : Irradiation cones by using backscatter electrons are made for the treatment of superficial small lesions of skin, oral cavity, and rectum where a significant dose gradient and maximum surface dose is desired. Methods and Materials : Backscatter electrons are produced from the primary electron beams from the linear accelerators. The design consists of a cylindrical cone that has a thick circular plate of high atomic number medium (Pb or Cu) attached to the distal end, and the plate can be adjusted the reflected angle. Primary electrons strike the metal plate perpendicularly and produce backscatter electrons that reflect through the lateral hole for treatment. Using film and a parallel plate ion chamber, backscatter electron dose characteristics are measured. Results : The depth dose characteristic of the backscatter electron is very similar to that of the hard x-ray beam that is commonly used for the intracavitary and superficial lesions. The basckscatter electron energy is nearly constant and effectively about 1.5 MeV from the clinical megavoltage beams. The backscatter electron dose rate of $35\~85\;cGy/min$ could be achieved from modern accelerators without any modification. and the depth in water of $50\%$ depth dose from backscatter electron located at 6mm for $45^{\circ}$ angled lead scatter. The beam flatness is dependent on the slit size and the depth of treatment, but is satisfactory to treat small lesions. Conclusions : The measured data for backscatter electron energy, depth dose flatness dose rate and absolute dose indicates that the backscatter electrons are suitable for clinical use.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.62-68
• /
• 2014

Purpose: After I-131 therapy, SPECT/CT is useful in identifying location of thyroid remnants and metastasis of thyroid cancers. An excessive uptake of thyroid leads to a ringing artifact in the SPECT images. The aim of this study is to investigate and suggest a proper post filters to remove ringing artifact and produce better image quality. Materials and Methods: A low-cost, customized thyroid-mimicking phantom, consisting of an acrylic bottle and a hollow sphere was used for SPECT/CT Discovery (GE Healthcare, USA). It was filled with I-131 solution. The ratio of hollow sphere to background were varied as 50:1, 200:1, 1000:1 and 4000:1. Acquired images were reconstructed by OSEM (2 iterations, 10 subsets) with and without Evolution (resolution recovery correction, GE). Three different post-filters were applied; Butterworth (cut off: 0.38 to 0.58 with intervals of 0.05), Hanning (cut off: 0.8 to 1 with intervals of 0.05) and Gaussian (FWHM: 3 to 5 with intervals of 0.5) filters. Contrast, background variability, air area variability, and full width half maximum (FWHM) were compared. Results: Higher contrasts were obtained from the SPECT images with Evolution than without Evolution. In the case of images without Evolution, image distortion such as star artifact was generated. For all sphere-to-background ratio, the Butterworth filter showed better constrasts and FWHMs than other two filters, but the ringing artifact was still generated in all studies except 50:1 and it was decreased as cutoff value was increased. The ringing artifact didn't appear with Hanning and Gaussian filters at all studies, however constrats and FWHMs with Gaussian was worse than Hanning filter. For the images having ringing artifacts, the background variability and air area variability were increased. Conclusion: In this study, we suggested that it is desirable to use Hanning filter when the ringing artifact is generated and to use Butterworth filter when ringing artifact is not generated in I-131 SPECT.

• The Korean Journal of Pain
• /
• v.1 no.2
• /
• pp.214-222
• /
• 1988

With the arm in hyperabduction, we have carried out 525 procedures of supraclavicular brachial plexus block from Aug. 1976 to June 1980, whereas block with the arm in adduction has been customarily performed by other authors. The anesthetic procedure is as follows: 1) The patient lies in the dorsal recumbent position without a pillow under his head or shoulder. His arm is hyperabducted more than a 90 degree angle from his side, and his head is turned to the side opposite from that to be blocked. 2) An "X" is marked at a point 1 cm above the mid clavicle, immediately lateral to the edge of the anterior scalene muscle, and on the palpable portion of the subclavian artery. The area is aseptically prepared and draped. 3) A 22 gauge 3.5cm needle attached to a syringe filled with 2% lidocaine (7~8mg/kg of body weight) and epineprine(1 : 200,000) is inserted caudally toward the second portion of the artery where it crosses the first rib and parallel with the lateral border of the muscle until a paresthesia is obtained. 4) Paresthesia is usually elicited while inserting the needle tip about 1~2 em in depth. If so, the local anesthetic solution is injected after careful aspiration. 5) If no paresthesia is elicited, the needle is withdrawn and redirected in an attempt to elicit paresthesia. 6) If, after several attempts, no paresthesia is obtained, the local anesthetic solution is injected into the perivascular sheath after confirming that the artery is not punctured. 7) Immediately after starting surgery, Valium is injected for sedation by the intravenous route in almost all cases. The age distribution of the cases was from 11 to 80 years. Sex distribution was 476 males and 49 females (Table 1). Operative procedures consisted of 103 open reductions, 114 skin grafts combined with spinal anesthesia in 14, 87 debridements, 75 repairs, i.e. tendon (41), nerve(32), and artery (2), 58 corrections of abnormalities, 27 amputations above the elbow (5), below the elbow (3) and fingers (17), 20 primary closures, 18 incisions and curettages, 2 replantations of cut fingers. respectively (Table 2). Paresthesia was obtained in all cases. Onset of analgesia occured within 5 minutes, starting in the deltoid region in almost all cases. Complete anesthesia of the entire arm appeared within 10 minutes but was delayed 15 to 20 minutes in 5 cases and failed in one case. Thus, our success rate was nearly 100%. The duration of anesthesia after a single injection ranged from $3\frac{1}{2}$ to $4\frac{1}{2}$, hours in 94% of the cases. The operative time ranged from 0.5 to 4 hours in 92.4% of the cases(Table 3). Repeat blocks were carried out in 33 cases when operative times which were more than 4 hours in 22 cases and the others were completed within 4 hours (Table 4). Two patients of the 33 cases, who received microvasular surgery were injected twice with 2% lidocaine 20 ml for a total of $13\frac{1}{2}$ hours. The 157 patients who received surgery on the forearms or hands had pneumatic tourniquets (250 torrs) applied without tourniquet pain. There was no pneumothorax, hematoma or phrenic nerve paralysis in any of the unilateral and 27 bilateral blocks, but there was hoarseness in two, Horner's syndrome in 11 and shivering in 7 cases. No general seizures or other side effects were observed. By 20ml of 60% urcgratin study, we confirm ed the position of the needle tip to be in a safer position when the arm is in hyperabduction than when it is in adduction. And also that the humoral head caused some obstraction of the distal flow of the dye, indicating that less local anesthetic solution would be needed for satisfactory anesthesia. (Fig. 3,4).

• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.645-654
• /
• 2014

This study was conducted to investigate the effect of 1-methylcyclopropene (1-MCP, $1.0{\mu}L{\cdot}L^{-1}$), a known ethylene action inhibitor, on fruit quality and incidence of physiological disorders during a simulated marketing period at $25^{\circ}C$ for 20 days in early-season Asian pear (Pyrus pyrifolia Nakai) 'Hanareum' that had been treated with 0, 0.5, 1.2 or 2.4% $GA_{4+7}$. Weight loss of stored fruits increased with $GA_{4+7}$ concentration, and the 1-MCP treatment slightly reduced the weight loss rates during the marketing period. Flesh firmness decreased abruptly in all 1-MCP-untreated fruits as the storage period extended to 10 d, whereas the firmness of 1-MCP-treated fruits remained high (> 30 N) during 15 days shelf-life. The effect of 1-MCP was significantly reduced when fruits were subjected to increased GA concentration. Higher soluble solids content and acidity during extended shelf-life were also apparent in 1-MCP-treated 'Hanareum' pears. The L-values (lightness) and hue angles of 1-MCP treated samples were higher than those of controls during 20 days shelf-life, but the a-value (redness) was lower in 1-MCP treated fruits. 1-MCP treatment did not decrease the level of ethylene evolution regardless of $GA_{4+7}$ concentration during shelf-life in early-season Asian pear 'Hanareum'. By contrast, 1-MCP treatment decreased the respiration rate significantly during shelf-life. The efficacy of 1-MCP was greatest in the GA-untreated fruit and was reduced as the $GA_{4+7}$ concentration increased. 1-MCP treatment influenced the severity of physiological disorders including core browning and mealiness: 1-MCP treatment completely blocked the incidence of core browning of during 15 days shelf-life, and reduced the severity of mealiness during 20 days shelf-life regardless of $GA_{4+7}$ concentration. Based on our results, we conclude that the use of $1{\mu}L{\cdot}L^{-1}$ 1-MCP can be of great benefit for maintaining quality and preventing physiological disorders in early-season pear cultivar 'Hanareum' pear, whereas its efficacy decreases with the concentration of $GA_{4+7}$ whereas its efficacy gradually decreases when the concentration of $GA_{4+7}$ paste increased.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.1
• /
• pp.49-59
• /
• 1984

Optimizing investigation of characteristics of underwater welding by a gravity type arc welding process was experimentally carried out by using six types of domestic coated welding electrodes for welding of domestic marine structural steel plates (KR Grade A-1, SWS41A, SWS41B,) in order to develop the underwater welding techniques in practical use. Main results obtained are summarized as follows: 1. The absorption speed of the coating of domestic coated lime titania type welding-electrode became constant at about 60 minutes in water and it was about 0.18%/min during initial 8 minutes of absorption time. 2. Thus, the immediate welding electrode could be used in underwater welding for such a short time in comparison with the joint strength of in-atmosphere-and on-water-welding by dry-, wet-or immediate-welding-electrode. 3. By bead appearance and X-ray inspection, ilmenite, limetitania and high titanium oxide types of electrodes were found better for underwater-welding of 10 mm KR Grade A-1 steel plates, while proper welding angle, current and electrode diameter were 6$0^{\circ}C$, above 160A and 4mm respectively under 28cm/min of welding speed. 4. The weld metal tensile strength or proof stress of underwater-welded-joints has a quadratic relationship with the heat input, and the optimal heat input zone is about 13 to 15KJ/cm for 10mm SWS41A steel plates, resulting from consideration upon both joint efficiency of above-100% and recovery of impact strength and strain. Meanwhile, the optimal heat input zone resulting from tension-tension fatigue limit above the base metal's of SWS41A plates is 16 to 19KJ/cm. Reliability of all the empirical equations reveals 95% confidence level. 6. The microstructure of the underwater welds of SES41A welded in such a zone has no weld defects such as hydrogen brittleness with supreme high hardness, since the HAZ-bond boundary area adjacent to both surface and base metal has only Hv400 max with the microstructure of fine martensite, bainite, pearlite and small amount of ferrite.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.12
• /
• pp.45-52
• /
• 2015

With the rising interest in the environment, more attention on ecological restoration for damaged slope surface to restore its original state has been drawn. Generally, the most useful method is vegetation based spray work. This method uses green soil including sewage sludge, sawdust, paper sludge, and weathered granite soil. However, because there are neither accurate information nor test values about green soil, green soil is often lost by environmental factors such as rainfalls and strong winds. To solve the problem of green soil, it is necessary to prepare design standards about green soil, and conduct studies to deal with green soil loss in consideration of various variables including basic material property, soil quality of slope surface, and weather. This study was conducted in the mixture of green soil and eco-friendly soil stabilizer. With green soil, basic material property test and compaction test were conducted for the analysis on the basic characteristics of green soil. In the mixture with soil stabilizer at a certain ratio, we conducted shear strength test depending on the ratio in order to analyze the maximum shear strength, cohesion and the change in internal friction angles. Furthermore, in the mixture ratio of green soil and soil stabilizer, which is the same as the ratio in the shear strength test, an inclination of slope surface was made in laboratory for the analysis on erosion and germination rate. Finally, this study evaluated the most effective and economic mixing ratio of soil stabilizer to cope with neighboring environmental factors. According to the test, the shear strength of green soil increased up to 51% rely onto the mixing ratio of and a curing period, and its cohesion and internal friction angle also gradually increases. It is judged that the mixture of soil stabilizer was effective in improving shear strength and thereby increased the stability of green soil.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.56-77
• /
• 2019

Bi-Seok is a treasure trove of funeral rites and an important cultural asset that can shed light on the historical and social history of calligraphy, but research of the topic is still insignificant. In particular, research on the production method of Bi-Seok remains an unproven field. The production of Bi-Seok can be roughly divided into ma-jeong (refining stone), sculpture, and the Buk-chil (process of engraving letters) process. This article reveals some facts: First, performing ma-jeong to the Sang-Seok, Honyu-Seok, Bi-seok, which are known to be God's things. This process is needed because of the change in the perception of the Honyu-Seok due to the settlement and propagation of Confucian ceremonial rituals in the times of hardship in 1592 and 1636. As the crafting process of ma-jeong did not remain concrete, it was only possible to examine the manufacturing process of Bi-Seok through its materials and tools. Second, the rapid proliferation of Oh-Seok and Sa-jeo-chwi-yong (purchase of things made by private citizens) in the Yeongjo era has great importance in social and cultural history. When the Gang-Hwa-Seok of the commodity were exhausted, the Oh-Seok that was used by Sadebu (upper civil class) were used in the tomb of Jangneung, which made Oh-Seok popular among people. In particular, the use of Oh-Seok and the Ma-Jeong process could minimize chemical and physical damage. Third, the writing method of the Bi-seok is Buk-chil. After Buk-Chil of Song Si-Yeol was used on King Hyojong's tomb, the Buk-Chil process ( printing the letters on the back of the stone and rubbing them to make letters) became the most popular method in Korea and among other East Asian countries, and the fact that it was institutionalized to this scale was quite impressive. Buk-Chil became more sophisticated by using red ink rather than black ink due to the black color that results from Oh-Seok. Fourth, the writing method changes in the late Joseon Dynasty. Until the time of Yeongjo's regime, when inscribing, the depth of the angle was based on the thickness of the stroke, thus representing the shade. This technique, of course, did not occur at every Pyo-Seok or Shindobi, but was maintained by outstanding artisans belonging to government agencies. Therefore, in order to manufacture Bi-Seok, Suk-seok, YeonJeong, Ma-jeong, Jeong-Gan, ChodoSeoIp, Jung-Cho, Ip-gak, Gyo-Jeong, and Jang-Hwang, a process was needed to make one final product. Although all of these methods serve the same purpose of paying respects and propagandizing the great work of deceased persons, through this analysis, it was possible to see the whole process of Pyo-Seok based upon the division of techniques and the collaboration of the craftsmen.