• The korean journal of orthodontics
• /
• v.11 no.2
• /
• pp.109-123
• /
• 1981

The author studied and analyzed statistically 112 adults female ranging in age from 18 to 20 years with normal occlusion, 56 adults female ranging in age from 18 to 24 years with deep overbite and 53 adults female ranging in age from 18 to 28 years with open bite by vertical cephalometric analysis. The results were as follows; 1. In comparing normal occlusion with deep overbite and open bite, skeletal linear measurements were more significant than dentoalveolar linear measurements. SN-MP angle, SN-OP angle, PP-OP angle and Xi angle (ANS-Xi-Pog) were significant in anglular measurements. 2. Upper posterior facial height (SE-PNS), upper anterior alveolar height, lower posterior alveolar height, lower posterior alveolar height/lower anterior alveolar height and SN-PP angle were non significant between deep overbite and open bite. 3 The most significant items between deep overbite and open bite were lower anterior facial height (ANS-ME) and SN-MP angle. 4. Correlation coefficients of angular measurements were higher in deep overbite, while that of linear measurement total anterior facial height (N-ME) was higher in open bite. 5. In the multiple regression equation, significant variables were total anterior facial height (N-ME), lower anterior alveolar height, upper anterior alveolar height, upper posterior alveolar height, Xi angle (ANS-Xi-Pog) and ramus height (AR-Go) in deep overbite, and total anterior facial height (N-Me), lower anterior alveolar height, ramus height (AR-Go), lower posterior alveolar height, PP-MP angle and upper posterior facial height (SE-PNS) in open bite.

• Journal of the Ergonomics Society of Korea
• /
• v.18 no.1
• /
• pp.91-108
• /
• 1999

In our previous work using a motion analyzer and 3-dimensional sonic digitizer, the arm shapes for 23 women in their early twenties were classified into three characteristic types. In order to design sleeves, suitable for arm movements for the three characteristic arm shapes, a relationship between arm length variation and shoulder/elbow angles has been investigated for four cases of arm movements (flexion, extension, adduction and abduction). Each arm movement can be characterized by the changes in shoulder angle and the changes in elbow angle at the maximal shoulder angle. In all the four cases of arm movements, the changes of shoulder length and cap height are largest at the maximal shoulder angle. These changes were little affected by changes in elbow angle. The changes in the lower arm length and the difference between cap height and upper arm length are the largest at the maximal elbow angle of the maximal shoulder angle. There is a linear relationship between cap height and shoulder angle during arm movements; thus, in designing sleeves the cap height can be determined from the regression of cap height vs. shoulder angle.

• The korean journal of orthodontics
• /
• v.15 no.2
• /
• pp.175-195
• /
• 1985

Vertical and horizontal growth occur in the craniofacial complex which ensues continuous changes in facial morphology, until the end of active growth period. Longitudinal study for individual is essential, in the research on growth and development, however, the difficulties in obtaining long term subjects in Korea, the research has been limited. The author analyzed the cephalometric roentgenogrems of 43 boys and 47 girls taken from the ages 6 to 10. The subjects were divided into 3 groups according to SN-MP angle and 2 groups according to gonial angle. In this longitudinal study, 21 variables were measure 4. The obtained results were as follows: 1. SN-MP angle and genial angle had no significant changes in each group with age. 2. With age, facial convexity of hard tissue decreased in all groups, facial angle of hard tissue increased in low SN-MP angle group, but facial convexity of soft tissue had no significant changes in all groups with age. 3. In comparison of high SN-MP angle group and low SN-MP angle group, the former had greater facial convexity and smaller facial angle than the latter. 4. SN-MP angle and the ratio of posterior dental height to anterior dental height had reverse correlation in all groups. 5. High genial angle group revealed larger SN-MP angle, anterior dental height facial convexity, but smaller mandibular length, and the ratio of posterior dental height to anterior dental height compared with low genial angle group.

• Journal of Korean Medicine Rehabilitation
• /
• v.24 no.3
• /
• pp.165-171
• /
• 2014

Objectives This study was performed to analyze relationship between pillow height and patients of arm paresthesia. Methods The data were collected from December 2013 to April 2014. The subjects who visited in Korean Medical hospital for Arm paresthesia were 65. The pillow height was measured from the surface to occipital protuberance. And the angle of cervical spine was measured from the tragus to the acromion. Results 1. The average height of pillow was $5.36{\pm}2.37cm$, and the average of the angle of cervical spine was $18.62{\pm}8.94^{\circ}$. 2. Correlation and regression analysis were performed on the pillow height, the angle of cervical spine and paresthesia. There was a significant correlation between the pillow height and paresthesia (R=0.389). And it had correlation between the angle of cervical spine and paresthesia (R=0.269). 3. The regression analysis was used to determine the influence of elements. The pillow height can influence to the arm paresthesia. Conclusions Through this study, we found out significant relationship between pillow height, cervical angle and patients of arm paresthesia. This result suggests that the higher pillow height and cervical angle can cause the more painful arm paresthesia.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.3
• /
• pp.167-172
• /
• 2017

This study proposes a method for identifying correlations between tension and drop height for sessile droplets in a roll-to-roll processing system. The effect of tension and drop height on the contact angle of a sessile droplet is presented. Design of experiment (DOE) methodology and statistical analysis are used to define a correlation between the process parameters. The contact angle is decreased while increasing tension and drop height. The influence of the tension is less significant on the contact angle compared with the effect of the drop height. However, tension should be considered as a major parameter because it is not easy to fix with roll eccentricity and compensating speed of the driven roll. The results of this study show that the effect of tension on the contact angle of a sessile droplet is more important than drop height because the drop height is fixed when the process systems are determined.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.1
• /
• pp.67-74
• /
• 2014

This study researched into the left-right inclination of the rear foot at the lower limb joints, knee joint angle, angular velocity of the knee joint, angular acceleration and the max. Based on the analysis of kinematics according to the changes in the height of step box (6, 8, 10 inches) during step aerobics of female college students majoring in physical education. The findings of this study are as follows: Then angle of the knee joint decreased as the height of the step box increased the min. Angle was measured right before the right foot was on the step box, and the angle tended to decrease as the step box get heightened. The left-right inclination of the rearfoot angle according to the height of step box increased as the height increased. In the 'pull-up' stage during which the weight was loaded on the right foot the angle increased, while in the right foot stepping stage during which the right foot was on the ground, the left-right inclination of the rearfoot angle increased as the height of the step box increased. The angular velocity of the knee joint according to the height of step box started increasing when the right foot initially stepped on the step box and during the initial stepping section, the angular velocity decreased as the height of step box increased. The changes in angular acceleration of the knee joint according to the height of step box increased as the height of step box increased.

• Journal of Korean Neurosurgical Society
• /
• v.66 no.6
• /
• pp.703-715
• /
• 2023

Objective : This retrospective study investigated the factors that affect cage obliquity angle despite orthogonal maneuvers performed during oblique lateral interbody fusion (OLIF) and assessed the relationship between cage obliquity angle and radiological outcomes post-surgery. Methods : Twenty-nine males who underwent L4-L5 OLIF for lumbar degenerative disease between 2019 and 2021 with a followup duration greater than 12 months were analyzed. Radiological parameters were measured including psoas muscle volume, total psoas area index (total psoas muscle area [cm²]/height squared [m²]), distance from the iliac artery to the origin of the psoas muscle (DIAPM), angle between the origin of the psoas muscle and the center of the vertebral disc (APCVD), iliac crest height, disc height, lumbar flexibility (lumbar flexion angle minus extension angle), cage location ratio, cage-induced segmental lumbar lordosis (LL) (postoperative index level segmental LL minus used cage angle), foraminal height changes, fusion grade. Results : DIAPM, APCVD, iliac crest height, postoperative index level segmental LL, and cage-induced segmental LL were significantly correlated with OLIF cage obliquity angle. However, other radiological parameters did not correlate with cage obliquity. Based on multiple regression analysis, the predictive equation for the OLIF cage obliquity angle was 13.062-0.318×DIAPM+0.325×1APCVD+0.174×iliac crest height. The greater the cage obliquity, the smaller the segmental LL compared to the cage angle used. Conclusion : At the L4-L5 level, OLIF cage obliquity was affected by DIAPM, APCVD, and iliac crest height, and as the cage obliquity angle increases, LL agnle achievable by the used cage could not be obtained.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.17 no.4
• /
• pp.225-230
• /
• 2001

Morphological characteristics of the asymmetric mandible in 135 adult male patients were investigated. Panoramic X-ray images were recorded. Age, ramus height, antegonial notch height, condylar height, coronoid process height, ramus body height and condylar neck angle were calculated and measured. Statistical analysis of unpaired two-tailed t-test and correlation coefficients was performed to find the morphologic differences between short ramus height side and the other. Condylar height and ramus body height in short ramus height side were smaller than those of the other side. Antegonial notch height, coronoid process height, condylar neck angle showed no differences. Condylar neck height was correlated with condylar neck angle.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.5 no.2
• /
• pp.73-84
• /
• 2007

This study aims to examine changes from differences in the lumbar scoliosis angle and iliac crest height due to abnormal and habitual posture shown in unilateral weight load at standing posture and suggest data for preventing and treating lumbago. The subjects of this study are 16 lumbago patients between twenties and forties with chronic lumbago over six months, but without neurological symptoms. As a result of photographing front and back with three conditions such as weight load on both sides and left or right unilateral weight load posture in order to examine changes of lumbar scoliosis and iliac crest according to changes of posture at unilateral weight load, while scoliosis angle and iliac crest height by habitual unilateral support were increased, those by opposite support were decreased. In conclusion, it was found that habitual unilateral weight load may cause continuous distortion of spinal angle and change of iliac crest height and these may be a factor of lumbago. Therefore, if habitual unilateral weight load state is kept continuously, distortion of lumbar angle and iliac crest height may be greater and common efforts to change habitual unilateral weight load are needed.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.4
• /
• pp.303-312
• /
• 2015

Objective: The aim of this study is to investigate the effect of insole height change in the lumbosacral angle and physical functions in healthy males. Background: In order to release male's dissatisfaction with his height and to increase satisfaction with his body, using insole is generalized. There have been researches on female's body change in accordance with function of insole and heel height, whereas there are few researches on males. Method: Participants were divided into three groups. A control group had 10 participants who wore 0cm insole. Experimental group I had 10 participants who wore 2cm insole. Experimental group II had 10 participants who wore 4cm insole. All participants wore insoles during their daily lives for a trial period of 8 weeks. The results were evaluated before and after comparison, and we measured lumbosacral angle, balance (dynamic balance, agility, quickness) and lumbar pain (LBP). Results: This study showed that insole height affected lumbosacral angle and dynamic balance and pain. In particular, there were significant differences in the 4cm group among the three groups (p<.05). The 2cm group did show a significant difference in lumbosacral angle and pain (p<.05). Furthermore, no significant difference was observed within the control group. Conclusion: The 4cm insole height suggests that the increase of lumbosacral angle contributes to some changes in LBP, balance, pain and physical functions, probably leading to negative effects on variety of activities of daily life. Application: The results of wearing insoles with proper height will help to prevent musculoskeletal disorders.