• 한국의상디자인학회지
• /
• 제13권2호
• /
• pp.103-119
• /
• 2011

This study set out to analyze the solid shapes of knit flared skirts, which are best represented in a 3-dimensional shape for all knit skirts, according to the seamed and seamless production method and to estimate the silhouettes of knit flared skirts based on the results. It also aimed to help with the introduction and spread of seamless weaving by revising and supplementing potential problems and provide findings that would be put to active use as basic data, thus contributing to the development of original knitwear and offering fundamental materials for the development of the knitting industry. A number of experimental knit flared skirts were made according to skirt angle ($90^{\circ}$ and $180^{\circ}$), gauge (7G, 12G, and 15G), and grain (bias, wale, and radial), including 12 kinds of seamed knit flared skirts and 6 kinds of seamless knit flared skirts. Using a three-dimensional shape measurement system, the investigator measured the cross-sectional shapes of their hemlines. The SPSS 12 Version program was used for statistical processing, and descriptive statistics such as mean and standard deviation were used to compare the seamed and seamless knit flared skirts in the measurements (measurement items) of their solid shapes according to the width, gauges, and grain directions. The central grain direction of seamless knit flared skirts was in a radial form and even hemlines, thus presenting a beautiful appearance and solid shape. The 3-dimensional shapes show that seamless knit flared skirts are superior to seamed ones. The research findings are expected to open a door for Korea's knitting industry to quickly respond to small quantity batch production and additional orders.

• 수산해양기술연구
• /
• 제35권3호
• /
• pp.215-226
• /
• 1999

The experimented rangefinder consist of sets of V/A-Code GPS and sets of L1 C/A-code & carrier phase receivers connected by two spread spectrum radio modems in order to measure relative range and bearing between two ship antennas by real time, comparing and analyzing accuracy of both GPS receivers at the fix point on the land by means of executing zero baseline test by C/A code and by carrier phase as well as measuring distance range 5m, 10m, 15m between each other receivers. The results from the measurement of relative range and bearing are as follows as ;1. According to the results from zero baseline test, the average error by C/A-code receiver is less than 0.1m, which proves theories from published books but when each GPS receivers track different satellites, the range accuracy error becomes up to 100m by means of S/A. Because of this sudden wide range error, rangefinder is not appropriate at relative range measurement without additional modification of the algorism of the GPS receiver itself.2. According to relative range measurement by Carrier Phase and zero baseline test at static condition, the range error is less than 3.5cm in case that it passes more than 5 minutes after GPS sets can track simultaneously more than 6 satellites. Its main reason is understood that the phase center of antenna is bigger than geodetic antenna.3. When range measurement of two receivers from 5m, to 10m to 15m, the each range error is 0.340m, 0.190m, 0.011m and each standard variation is 0.0973m, 0.0884m, 0.0790m. The range error and standard variation are in inverse proportion to distance between two receivers. 4. L1 Carrier Phase GPS generally needs 5 minutes to fix and during this ambiguity search, the relative range and bearing angle is shown to be various.

• 한국어류학회지
• /
• 제13권4호
• /
• pp.274-278
• /
• 2001

청줄돔과 (Family Pomacanthidae)의 한 종인 Pomacanthus xanthometopon 후기자어의 외부형태를 관찰하였다. 표본은 2001년 5월 5일 서태평양 ($26^{\circ}9'N$, $125^{\circ}0'W$)에서 채집되었다. 표본의 체장은 8.0 mm였다. 몸은 현저히 옆으로 측편되어 있으며 체고는 체장의 66.3%였다. 항문은 등지느러미를 기준으로 8~9번째 극조의 하단부에 위치하였다. 2~4개로 구성된 소극이 몸 전체를 덮고 있었다. 성어에서 보이는 강한 전새개골극이 없었다. 점상의 흑색소포는 두정부, 목덜미, 몸통의 위쪽부분과 등지느러미의 1~11번째 극조의 지느러미막에 분포하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.571-582
• /
• 2010

전동차 중정비 시 대치차 기어의 비파괴검사 방법으로는 일반적으로 침투비파괴검사를 적용하고 있다. 침투비파괴검사는 결함의 미세한 개구부 속으로 침투액을 투입하여 표면에 잔류하는 여분의 침투액을 제거하고 현상제를 도포하여 결함지시 모양을 관찰하여 탐상하는 방법이다. 그러나 이 방법은 기어를 조립상태에서 침투비파괴검사를 실시하므로 많은 문제점이 있다. 치면의 각도가 급경사를 이루므로 충분한 침투가 어렵고 과잉제거의 문제가 있다. 그에 비해 자분비파괴검사는 표면 하 결함은 물론 미세한 결함 검출에 용이하다. 시험결과 치면에 응력이 집중되어 내부결함 및 미세결함이 존재하는 경우 침투비파괴검사로 발견되지 않는 경우가 있으나 자분비파괴 검사로 미세한 결함까지 발견 할 수 있었다. 따라서 전동차 대치차 기어의 합리적인 비파괴검사법은 자분을 사용한 비파괴검사가 적합하다고 판단한다.

• 한국광학회지
• /
• 제20권2호
• /
• pp.123-127
• /
• 2009

본 연구에서는 광고분자의 광특성을 향상시키기 위하여, $TiO_2$를 첨가시킨 광고분자를 제조하고, 그 광학 특성을 연구하였다. 광고 분자는 PVA를 바인더로, AA를 모노머로, TEOA를 개시제로, Eosin Y를 광감각제로 사용하여 제조하였다. 균일한 두께의 광고분자 필름을 얻기 위하여, 스핀 쿼터를 이용하여 일정양의 광고분자 용액을 슬라이드 글라스에 펼쳐 제조하였다. 건조 조건은 $25^{\circ}C$, 습도 60%, 72시간을 유지하였고, 이렇게 제작된 광고분자 필름을 $20{\sim}70$도 범위의 다양한 입사각에서 회절효율을 측정하였다. 그 결과, $TiO_2$가 첨가된 광고분자 필름은 무첨가 필름보다 5% 정도 높은 회절효율 값을 나타내었다. 뿐만 아니라, $TiO_2$의 첨가는 넓은 입사각 범위에서도 높은 효율을 나타내는데 효과적이었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.505-505
• /
• 2011

The control of wettability of thin films is of great importance and its success surely brings us huge applications such as self-cleaning, antifogging and bio-passive treatments. Usually, the control is accomplished by modifying either surface energy or surface topography of films. In general, hydrophobic surface can be produced by coating low surface energy materials such as fluoropolymer or by increasing surface roughness. In contrast, to enhance the hydrophillicity of solid surfaces, high surface energy and smoothness are required. Silica (SiO2) is environmentally safe, harmless to human body and excellently inert to most chemicals. Also its chemical composition is made up of the most abundant elements on the earth's crest, which means that SiO2 is inherently economical in synthesis. Moreover, modification in chemistry of SiO2 into various inorganic-organic hybrid materials and synthesis of films are easily undertaken with the sol-gel process. The contact angle of water on a flat silica surface on which the Young's equation operates shows ~50o. This is a slightly hydrophilic surface. Many attempts have been made to enhance hydrophilicity of silica surfaces. In recent years, superhydrophilic and antireflective coatings of silica were fabricated from silica nanoparticles and polyelectrolytes via a layer-by-layer assembly and postcalcination treatment. This coating layer has a high transmittance value of 97.1% and a short water spread time to flat of <0.5 s, indicating that both antireflective and superhydrophilic functions were realized on the silica surfaces. In this study, we assessed hydrophillicity and hydrophobicity of silica coating layers that were synthesized using the sol-gel process. Systematic changes of processing parameters greatly influence their surface properties.

• The Korean Journal of Pain
• /
• 제10권2호
• /
• pp.225-230
• /
• 1997

Background: Authors modified the traditional continuous axillary brachial plexus block technique of Selander for purpose of increasing success rate and decreasing complications by use of commercial epidural anesthesia set. Method: Thirty-nine patients scheduled for upper extremity operations were injected with 40 ml of anesthetic solution by axillary perivascular technique, using 23~25G immobile needle at 2 cm from the pectoralis major. Tuohy needle was immediately introduced at 4 cm from the pectoralis major and pierced the expanded neurovascular sheath at an angle of 30 degree to the skin. The "pop" was well noted well. Needle was advanced 0.5 to 3.0 cm and epidural catheter introduced through the needle. After removal of needle, occlusive dressing was done. Tip of catheter and spread of solution were demonstrated by fluoroscopy with contrast dye after completion of procedure. Result: Catheter insertion was successful at first attempt for all case. Total length of insertion was from 6 to 13($10.0{\pm}1.7$) cm. Tip of catheter was placed in infraclavicular space(66.7%), about the humeral head(17.9%) and in upper arm in 3 cases as U-shape(7.9%). Catheters were maintained for $6.7{\pm}2.6$(3-12) days. There were no complications such as: perforation of major vessels, needle trauma to nerve, infection, bleeding or hematoma. Conclusion: This study demonstrated continuous axillary brachial plexus block with epidural anesthesia set is safe, easy and convenient modification of technique of Selander.

• Macromolecular Research
• /
• 제12권4호
• /
• pp.367-373
• /
• 2004

We have developed a rigorous heat treatment method to improve the biocompatibility of chitosan as a tissue-engineered scaffold. The chitosan scaffold was prepared by the controlled freezing and lyophilizing method using dilute acetic acid and then it was heat-treated at 110$^{\circ}C$ in vacuo for 1-3 days. To explore changes in the physicochemical properties of the heat-treated scaffold, we analyzed the degree of deacetylation by colloid titration with poly(vinyl potassium sulfate) and the structural changes were analyzed by scanning electron microscopy, Fourier transform infrared (FT-IR) spectroscopy, wide-angle X-ray diffractometry (WAXD), and lysozyme susceptibility. The degree of deacetylation of chitosan scaffolds decreased significantly from 85 to 30% as the heat treatment time increased. FT-IR spectroscopic and WAXD data indicated the formation of amide bonds between the amino groups of chitosan and acetic acids carbonyl group, and of interchain hydrogen bonding between the carbonyl groups in the C-6 residues of chitosan and the N-acetyl groups. Our rigorous heat treatment method causes the scaffold to become more susceptible to lysozyme treatment. We performed further examinations of the changes in the biocompatibility of the chitosan scaffold after rigorous heat treatment by measuring the initial cell binding capacity and cell growth rate. Human dermal fibroblasts (HDFs) adhere and spread more effectively to the heat-treated chitosan than to the untreated sample. When the cell growth of the HDFs on the film or the scaffold was analyzed by an MTT assay, we found that rigorous heat treatment stimulated cell growth by 1.5∼1.95-fold relative to that of the untreated chitosan. We conclude that the rigorous dry heat treatment process increases the biocompatibility of the chitosan scaffold by decreasing the degree of deacetylation and by increasing cell attachment and growth.

• 대한조선학회논문집
• /
• 제52권1호
• /
• pp.8-18
• /
• 2015

Reduction of the fuel oil consumption and corresponding greenhouse gas exhausted from ships is an important issue for today's ship design and shipping. Several concepts and devices on the superstructure of a container ship were suggested and tested in the wind tunnel to estimate the air drag reduction. As a preliminary performance evaluation, air drag contributions of each part of the superstructure and containers were estimated based on RANS simulation respectively. Air drag reduction efficiency of shape modification and add-on devices on the superstructure and containers was also estimated. Gap-protectors between containers and a visor in front of upper deck were found to be most effective for drag reduction. Wind tunnel tests had been carried out to confirm the drag reduction performance between the baseline(without any modification) configuration and two modified superstructure configurations which were designed and chosen based on the computation results. The test results with the modified configurations show considerable aerodynamic drag reduction, especially the gap-protectors between containers show the largest reduction for the wide range of heading angles. RANS computations for three configurations were performed and compared with the wind tunnel tests. Computation result shows the similar drag reduction trend with experiment for small heading angles. However, the computation result becomes less accurate as heading angle is increasing where the massively separated flow is spread over the leeward side.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제13권2호
• /
• pp.99-106
• /
• 2005

Falling film heat transfer has been widely used in many applications in which heat and mass transfer occur simultaneously, such as evaporative coolers, cooling towers, absorption chillers, etc. In such cases, it is desirable that the falling film spreads widely on the surface to form a thin liquid film to enlarge contact surface and to reduce the thermal resistance across the film and/or the flow resistance to the vapor stream over the film. In this respect, hydrophilic treatment of the surface has been tried to improve the surface wettability by decreasing the contact angle between the liquid and the surface. However, the hydrophilic treatment was found not very effective to increase the surface wettedness of inclined surfaces, since the liquid flow forms rivulet patterns instead of a thin film as it flows down the inclined surface and accelerates gradually by the gravity. In this work, a novel method is suggested to improve the surface wettedness enormously. In this work, the surface is treated to have a thin hydrophilic porous layer on the surface. With this treatment, the liquid can spread widely on the surface by the capillary force resulting from the porous structure. In addition to this, the liquid can be held within the porous structure to improve surface wettedness regardless of the surface inclination. The experiment on the evaporative cooling of inclined surfaces has been conducted to verify the effectiveness of the surface treatment. It is measured that the latent heat transfer increases almost by $80\%$ at the hydrophilic porous layer coated surface as compared with the untreated surface.