• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 초전도 자성체 연구회
• /
• pp.50-54
• /
• 2003

The output characteristics of thin film NiO/NiFe bilayered magnetoresistive device have been measured as a function of the direction of external magnetic field. Each layer was fabricated by rf magnetron sputtering method, and especially, the under layer, NiO, was fabricated under the in-situmagnetic field of about 1000Oe. The magnetoresistive devices were designed with the angle of 45degree between the direction of current of the device pattern and the induces magnetic field in the NiO film layer. The output of the devices had a good linearity when the devices were placed on the external magnetic field perpendicular to induced field direction and also 45 degree with the currenr path direction.

• 대한기계학회논문집B
• /
• 제31권12호
• /
• pp.1017-1023
• /
• 2007

This study is intended to analyze the effect of thin ink-film thickness around rotating printing roll on the printing quality in the gravure printing process which is used for making electronics circuit like a RFID tag with a conductive ink. The present work numerically estimates the film thickness around rotating roller partially immersed in ink for which the volume of fluid (VOF) method was adopted to figure out the film formation process around rotating roller. Parameter studies were performed to compare the effect of ink properties (viscosity, surface tension), operating condition (roller rotating speed, initial immersed angle) on the film thickness. The result indicates that the film thickness has a strong dependency on the rotating speed, while the surface tension has negligible effect.

• 대한조선학회논문집
• /
• 제44권4호
• /
• pp.370-378
• /
• 2007

In this study. a numerical analysis has been performed for the turbulent flow around a 15,000TEU twin-skeg container ship using a commercial CFD code. FLUENT. The computed results have been compared with the model test data from MOERI. We investigated viscous resistance coefficient. wake distribution and characteristics of the shear flow according to the grid numbers. Although the free surface is approximated by the plane of symmetry in this work. the calculated axial velocity and transverse vector show a good agreement with the MOERI experimental data except for the region of 0.9 level of axial velocity at the propeller plane. The numerical analysis show that commercial CFD code is useful tool for the evaluation of complex hull form with twin-skegs.

• 마이크로전자및패키징학회지
• /
• 제9권4호
• /
• pp.31-34
• /
• 2002

For the mold die sticking mechanism, the major explanation is that the silica as a filler in EMC (epoxy molding compound) wears die surface to be roughened, which results in increase of adhesion strength. As the sticking behavior, however, showed strong dependency on the EMC models based on the experimental results from different semiconductor manufacturers, chemisorption or acid-base interaction is apt to be also functioning as major mechanisms. In this investigation, the plasma source ion implantation (PSII) using $O_2, N_2$, and $CF_4$ modifies sample surface to form a new dense layer and improve surface hardness, and change metal surface condition from hydrophilic to hydrophobic or vice versa. Through surface energy quantification by measuring contact angle and surface ion coupling state analysis by Auger, major governing mechanism for sticking issue was figured out to be a complex of mechanical and chemical factors.

• Structural Engineering and Mechanics
• /
• 제71권1호
• /
• pp.37-43
• /
• 2019

This paper studies application of modified couple stress theory and first order shear deformation theory to magneto-electro-mechanical vibration analysis of three-layered size-dependent curved beam. The curved beam is resting on Pasternak's foundation and is subjected to mechanical, magnetic and electrical loads. Size dependency is accounted by employing a small scale parameter based on modified couple stress theory. The magneto-electro-mechanical preloads are accounted in governing equations to obtain natural frequencies in terms of initial magneto-electro-mechanical loads. The analytical approach is applied to investigate the effect of some important parameters such as opening angle, initial electric and magnetic potentials, small scale parameter, and some geometric dimensionless parameters and direct and shear parameters of elastic foundation on the magneto-electro-elastic vibration responses.

• Structural Engineering and Mechanics
• /
• 제69권2호
• /
• pp.145-153
• /
• 2019

Modified couple stress formulation and first order shear deformation theory are used for magneto-electro-elastic bending analysis of three-layered curved size-dependent beam subjected to mechanical, magnetic and electrical loads. The governing equations are derived using a displacement field including radial and transverse displacements of middle surface and a rotation component. Size dependency is accounted based on modified couple stress theory by employing a small scale parameter. The numerical results are presented to study the influence of small scale parameter, initial electric and magnetic potentials and opening angle on the magneto-electro-elastic bending results of curved micro beam.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.310-311
• /
• 2008

We have studied electro-optical characteristics of fringe-field switching (FFS) mode with high $d{\Delta}n$ according to the electrode position. In this device, the fringe-electric field drives the LCs to rotate so that the dielectric torque is electrode-positional dependent, which results in electrode-position dependency in the LC's rotating angle. We confirmed polarization microscope image and chromaticity diagram at the different electrode position with LC that have high $d{\Delta}n$. Since the FFS mode is influenced by horizontal and vertical electric field, the FFS mode modulates light using both phase retardation and polarization rotation effect, which had already been verified with previous studies. However, from another point of view, tight modulation of FFS mode has been demonstrated by performing experiment and calculated simulation at the high $d{\Delta}n$ LC cell.

• 비파괴검사학회지
• /
• 제22권2호
• /
• pp.193-197
• /
• 2002

레일리 (Rayleigh) 표면탄성파의 속도와 산란의 주파수 의존성을 이용하여 마모로 인해 열화된 AISI 1045강 사편의 깊이방향 잔류응력 분포 (열화 기울기)의 비파괴적인 평가가 시도되었다. 액체/고체 경계면에 초음파가 특정각도로 입사할 때 발생한 표면탄성파의 산란과 복사로 인해 나타나는 후방복사 프로파일의 오른쪽 반치폭과 크기 그리고 발생각으로 잔류응력 분포의 해석도 가능하였으며 평균법에 의한 복사파의 세기 및 스펙트럼의 변화는 잔류응력 분포와 열화로 인해 발생한 미세 결함 밀도과의 연관성을 보여주었다.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1417-1427
• /
• 2019

In this study, we evaluated the performance of a commercial pixelated cadmium zinc telluride (CZT) detector for spectroscopy and identified its feasibility as a Compton camera for radiation monitoring in a nuclear power plant. The detection system consisted of a $20mm{\times}20mm{\times}5mm$ CZT crystal with $8{\times}8$ pixelated anodes and a common cathode, in addition to an application specific integrated circuit. The performance of the various radioisotopes $^{57}Co$, $^{133}Ba$, $^{22}Na$, and $^{137}Cs$ was evaluated. In general, the amplitude of the induced signal in a CZT crystal depends on the interaction position and material non-uniformity. To minimize this dependency, a drift time correction was applied. The depth of each interaction was calculated by the drift time and the positional dependency of the signal amplitude was corrected based on the depth information. After the correction, the Compton regions of each spectrum were reduced, and energy resolutions of 122 keV, 356 keV, 511 keV, and 662 keV peaks were improved from 13.59%, 9.56%, 6.08%, and 5%-4.61%, 2.94%, 2.08%, and 2.2%, respectively. For the Compton imaging, simulations and experiments using one $^{137}Cs$ source with various angular positions and two $^{137}Cs$ sources were performed. Individual and multiple sources of $^{133}Ba$, $^{22}Na$, and $^{137}Cs$ were also measured. The images were successfully reconstructed by weighted list-mode maximum likelihood expectation maximization method. The angular resolutions and intrinsic efficiency of the $^{137}Cs$ experiments were approximately $7^{\circ}-9^{\circ}$ and $5{\times}10^{-4}-7{\times}10^{-4}$, respectively. The distortions of the source distribution were proportional to the offset angle.

• 전자공학회논문지CI
• /
• 제43권3호
• /
• pp.39-49
• /
• 2006

본 논문에서는 비전 기술에 기반을 둔 손 모양 인식 시스템의 성능 향상을 위하여 강화학습에 의한 손 모양 인식 방법을 제안한다. 비전 센서에 기반을 둔 손 모양 인식은 손의 높은 자유도로 인한 자체 겹침 (self-occlusion) 현상과 관찰 방향 변화에 따른 입력 영상의 다양함으로 인식에 어려움이 따른다. 따라서 비전 기반 손 모양 인식의 경우, 카메라와 손 간의 상대적인 각도에 제한을 두거나 여러 대의 카메라를 배치하는 것이 일반적이다. 그러나 카메라와 손 간의 상대적 각도에 제한을 두는 경우에는 사용자의 움직임에 제약이 따르게 되며, 여러 대의 카메라를 사용할 경우에도 각 입력된 영상에 대한 인식 결과를 최종 인식 결과에 반영하는 방식에 대하여 추가적인 고려를 해야 한다. 본 논문에서는 비전 기반 손 모양 인식의 이러한 문제점을 개선하기 위하여 인식 과정에서 사용되는 특징을 손 구조적인 각도 정보와 손 윤곽선 정보로 나누고 강화학습을 통하여 각 특징간의 연관성을 정의하는 방식을 제안한다. 또한 제안된 방법을 세 대의 카메라를 이용한 손 모양 인식 시스템에 적용하여 유용성을 검증한다.