• 한국건축시공학회지
• /
• 제3권2호
• /
• pp.141-148
• /
• 2003

This study deals with the estimation of material properties according to the construction condition for water-soluble rubberized asphalt waterproofing material of spray type. In this study, the waterproofing material property by the spray construction method is suggested by means of estimation its tensile performance and temperature dependency according to mix proportion ratio(4:1, 8:1), referenced viscosity and solid content (A:360cps, 76%, B:580cps, 79%, C:490cps, 70%), spray angle($30^{\circ}$, $45^{\circ}$, $60^{\circ}$), and spray distance(30cm, 50cm, 70cm). The result of testing are as follows. (1) The mix proportion ratio of principal agent and hardener is 4:1. (2) The viscosity referenced and solid content are 490cps and 70%. (3) The spray angle referenced is $45.^{\circ}$ (4) The distance referenced from concrete surface to spray gun is 40~50cm.

• 한국수소및신에너지학회논문집
• /
• 제25권5호
• /
• pp.550-559
• /
• 2014

Hydraulic performance of the 1 inch ball valve have been analyzed based on the three-dimensional Reynolds-averaged Navier-Stokes analysis and an experiment. The experimental test rig of the 1 inch ball valve has been developed to investigate pressure drop for the 1 inch ball valve. The numerical model, which has reliability and effectiveness, has been constructed through the grid dependency test and validation with the results of the experiment. Shear stress transport turbulence model has been used to enhance an accuracy of the turbulence prediction in the pipeline and ball valve, respectively. Effects of the ball valve angle on the flow characteristics and friction performance have been evaluated.

• 조명전기설비학회논문지
• /
• 제26권6호
• /
• pp.8-15
• /
• 2012

In this paper, we investigated possible optical parameters causing deviation of experimentally observed output spectra from theoretically predicted results in a high-order fiber comb filter based on a polarization-diversity loop configuration. They include wavelength dependency of half-wave plates (HWPs) inserted in the filter for wavelength switching and the modal birefringence of single-mode fibers (SMFs) with which optical components comprising the filter are connected. In order to consider the effect of the modal birefringence of the SMF on a filter performance, it is modeled as a low birefringence fiber with an arbitrary orientation angle and birefringence. It is found from the simulation results that the modal birefringence of SMFs strongly affects the spectral characteristics of the filter and decreases the extinction ratio of the filter, compared with the wavelength dependency of HWPs. In particular, it is also confirmed that the spectral deviation and asymmetric distortions of side-lobes in narrow band transmission spectra result mainly from the modal birefringence of SMFs.

• 한국지진공학회논문집
• /
• 제23권1호
• /
• pp.55-70
• /
• 2019

The phase properties of ground acceleration records from Mw 5.5~6.5 earthquakes are analyzed. The interrelationships between phase properties and significant durations, as well as PGA, are clarified through both of theoretical and empirical approaches. The probabilistic characteristics of phase information is also discussed based on previous studies and it is shown that circular normal distribution is the most appropriate probability distribution for the phase angle and phase difference. Whereas those variates can be modeled by Gaussian random variables. From the survey results on the frequency dependency of the phase statistics, a simple model is introduced, which is possible to express the frequency dependency of phase information. It is also shown that the significant duration can be controlled by appropriately chosen standard deviation of phase difference for 4~8Hz frequency band and additional consideration of phase scattering in higher frequency band through a series of Monte Carlo simulations. The source of phase scattering effect is also pointed out and discussed.

• 터널과지하공간
• /
• 제23권3호
• /
• pp.219-227
• /
• 2013

Mohr-Coulomb 파괴조건식은 암반구조물의 설계에 활발히 이용되고 있지만 암석의 비선형 강도특성과 중간주응력이 강도에 미치는 영향을 고려할 수 없다는 단점을 가지고 있다. 이러한 단점을 극복하기 위하여 Hoek-Brown 파괴조건식이 제안되었으며 최근 중간주응력의 영향을 고려할 수 있는 여러 3-D 파괴조건식들이 제안되고 있다. 그러나 아직까지도 많은 암반공학적 설계과정에서 Mohr-Coulomb 파괴조건식을 이용하여 암반의 파괴 가능성이 평가되고 있고 대부분의 현장 기술자들도 내부마찰각과 점착력으로 암반의 강도특성을 이해하는데 익숙하다. 그러므로 Mohr-Coulomb 파괴조건식에 비해 개선된 비선형 혹은 3-D 파괴조건식의 접선마찰각 및 접선점착력이 구해지면 기존의 Mohr-Coulomb 파괴조건식을 활용하는 틀 안에서 개선된 파괴조건식들의 장점을 이용하는 것이 가능하다. 본 연구에서는 접선마찰각과 접선점착력을 응력불변량으로 표시하는 방법을 제시하고 이를 일반화된 Hoek-Brown 파괴조건식과 Hoek-Brown 파괴조건식을 3-D로 확장시킨 HB-WW 파괴조건식에 적용하였다. 또한 파괴조건식의 중간주응력 의존성을 3차원 주응력 공간에서 기하학적으로 해석하는 새로운 접근법을 제안하였다. 제안된 방법의 실행 사례를 통해 HB-WW 파괴함수의 접선마찰각과 접선점착력은 2-D 파괴함수의 경우와 달리 중간주응력의 크기에 상당한 영향을 받음을 보였다.

• 한국수소및신에너지학회논문집
• /
• 제26권4호
• /
• pp.386-392
• /
• 2015

Flow characteristics inside a 10 inch ball valve have been analyzed using three-dimensional numerical analysis and experiments. Continuity and three-dimensional Reynolds-averaged Navier-Stokes equations have been used as governing equations for the numerical analysis. The numerical model has been constructed through the grid dependency test and validation with the results of experiments to ensure reliability and numerical effectiveness. The shear stress transport (SST) model has been used as the turbulence closure. The experimental test-rig has been constructed to measure pressure, temperature and flow rate along the pipeline. Some valve opening angles have been tested to evaluate the flow characteristics inside the ball valve and pipeline. The results show that the rapid pressure variations is observed while the valve opening angle decreases, which caused by flow separation at the downstream of the ball valve.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.198-202
• /
• 2003

Tunable laser diode module with 50GHz-spacing internal wavelength locker was developed. Angle tilting dependency on FSR and peak wavelength shift and the proper initial tilting angle was calculated. By tilting the etalon, the response of the internal wavelength locker module was tuned. As a result, the fabricated internal wavelength locker module showed good performance over 62 channels.

• International Journal of Control, Automation, and Systems
• /
• 제3권2호
• /
• pp.217-224
• /
• 2005

Generally, the underwater flight vehicle (UFV) depth control system operates with the following problems: it is a multi-input multi-output (MIMO) system because the UFV contains both pitch and depth angle variables as well as multiple control planes, it requires robustness because of the possibility that it may encounter uncertainties such as parameter variations and disturbances, it requires a continuous control input because the system that has reduced power consumption and acoustic noise is more practical, and further, it has the speed dependency of controller parameters because the control forces of control planes depend on the operating speed. To solve these problems, an adaptive fuzzy sliding mode controller (AFSMC), which is based on the decomposition method using expert knowledge in the UFV depth control and utilizes a fuzzy basis function expansion (FBFE) and a proportional integral augmented sliding signal, is proposed. To verify the performance of the AFSMC, UFV depth control is performed. Simulation results show that the AFSMC solves all problems experienced in the UFV depth control system online.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2279-2284
• /
• 2007

This study is intended to analyze the effect of thin ink-film thickness around rotating printing roll on the printing quality in the gravure printing process which is used for making electronics circuit like a RFID tag with a conductive ink. The present work numerically estimates the film thickness around rotating roller partially immersed in ink, for which the volume of fluid (VOF) method was adopted to figure out the film formation process around rotating roller. Parameter studies were performed to compare the effect of ink viscosity, surface tension, roller rotating speed, immersed angle on the film thickness. The result indicates that the film thickness has a strong dependency on the fluid viscosity, while the surface tension has negligible effect.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2672-2677
• /
• 2007

An investigation of low Reynolds number flow in nozzles and diffusers which are widely used in the valveless micropump is presented. Flow characteristics in the nozzle and diffuser are explained in view of viscous effect and flow oscillation induced by pumping membrane. These calculation results show that the rectification property of valveless micropump is due to a flow separation in the diffuser and the separation is largely originated from the flow oscillation. Under the assumptions of steady flow velocity profile and flow separation in the diffuser, simplified analytical models are provided to see the dependency of rectification on the micropump geometry. Geometric parameters of channel length, nozzle throat, chamber size, and converging/diverging angle are depicted through the analytical models in low Reynolds number flow, and the prediction and experimental results are compared. This theoretical study can be used to determine the optimum geometry of valveless micropump.