• 한국주조공학회지
• /
• 제17권5호
• /
• pp.465-471
• /
• 1997

An integrated computer program consisting of a pre-processor, main solver, and post-processor was developed for the design of large steel castings. The pre-processor, based on the AutoCAD, enables the user to produce approval drawings, casting design drawings and mesh diagrams in sequence using a personal computer. In the main solver, two numerical models were employed; one models the fluid flow during mold filling, and the other models the heat transfer and solidification. The post-processor can be used to present simulation results such as flow pattern, mold filling sequences, solidification times, temperature gradients and location of shrinkage defects by color graphics. In order to validate the applicability of the present integrated program, a series of experiments on simple-shaped steel castings were carried out. After the validation of the present model, it was applied to the casting design of the large steel anchor of an SC42 alloy. Various solidification parameters such as a temperature distribution and a solidification time in the casting and the mold were compared with those obtained experimentally. Simulated results predicting shrinkage defects were in good agreement with those obtained experimentally. It was found that the present method can be successfully applied to the quantitative casting design for complex-shaped large steel castings.

• 한국실내디자인학회논문집
• /
• 제18권6호
• /
• pp.202-210
• /
• 2009

This research was undertaken to prove the relationship between street mall activation and architectural plan design. The research methodology was established based on the analysis of data of two existing street malls in Korea (Western Dome & LaFesta) and theoretical studies of outdoor space design. The findings from this study are the following: First, building blocks with segments in every 50m or so are ideal for detailed communication between visitors and building contents. Second, the ratio of width of main corridor and building height should be less than 1 to provide intimate feel and keep visitors' attention concentrated in the facility. Third, store unit should have more storefronts to be exposed more to passers-by and lead more pedestrian traffic. Fourth, shape of store unit would rather be wide and shallow, instead of narrow and deep, to have more exposure to the central corridor. Fifth, the building block of the busiest(most expensive) area that is usually at the main entrance area of street mall should be flexible to fit more smaller units to maximize the profitability. Sixth, the main entrance of store should face the main pedestrian corridor to induce the influx of visitors. Lastly seventh, anchor tenant that has strong name recognition is usually located on basement or higher level to induce pedestrian traffic into the mall, key tenants that are strong and familiar brand names should be located at the corner of building block with spacing to attract visitors, provide even distribution of traffic, and support wayfinding, and local tenant should be located at small units along the central corridor or remainder spaces occurred from building core layout.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.509-509
• /
• 2022

Rice has always been the anchor of food security in the Philippines and the government is adamant about sustaining rice production by ensuring reliable irrigation water availability. Among the numerous irrigation schemes, the importance of the Pulangui River Irrigation System (PRIS) is undeniable, as it is the largest and primary irrigation source for rice production areas which are considered the food basket in Northern Mindanao. However, the ageing irrigation structures, unlined canals, long-standing water delivery systems, and climate change are compromising the performance of PRIS; and every year, during the dry and wet season, the maximum rice irrigable area is not achieved. From the field-scale water management perspective, untimely irrigation application, an unregulated roster of turn for irrigation among farmers, and the traditional practice of flooding the rice fields are the main causes of substantial water losses in conveyance, distribution, and farm application of irrigation water. Hence, proper irrigation scheduling is crucial to cultivate the maximum irrigable area by ensuring equity among the farmers and to increase the water use efficiency and yield. In this study, the FAO single crop coefficient approach was adopted to estimate rice water requirements, which were subsequently used to suggest appropriate irrigation schedules based on the recommended field-scale rice cultivation practices. The study results would improve the irrigation system management in the study area by facilitating in regulating the canal water flows and releases according to suggested irrigation schedules that could lead to increased benefited area, yield, and water efficiency without straining the available water resources.

• 대한치과보철학회지
• /
• 제45권4호
• /
• pp.492-505
• /
• 2007

Statement of problem: An orthodontic miniscrew implant has been used as a skeletal anchorage for orthodontic treatment. However, any relation among the influence of the cortical bone, morphologic differences of orthodontic miniscrew implants and new bone formation hasn't been made clear yet. Purpose: The purpose of this study was to evaluate whether the orthodontic miniscrew implant could work as an intraoral skeletal anchorage immediately and stably for orthodontic treatment after insertion of it. Material and methods: Two types of orthodontic miniscrew implants were used in this experiment; tapered type and straight type. One hundred and sixty eight orthodontic miniscrew implants were inserted into the tibiae of 21 rabbits and sacrificed on 3, 7, 11, 14, 21 and 28days later after insertion of them to study removal torque values and histologic and histomorphometric analyses. Results: The results were as follows. 1. The removal torque values of the tapered type were higher than those of the straight type in all groups(p<0.05). 2. There wasn't any distinguishing differences between the tapered type and the straight type about the new bone formation percentage. 3. The removal torque values for both the tapered type and the straight type were gradually decreased at early stages of the test but started to increase at the 7 days group of the straight type and the 11 days group of the tapered type. 4. New bone formation percentage was increased gradually for both the tapered and the straight types as time passed(p<0.05). 5. It was found that the tapered type showed lower values in the cortical bone about both the maximum equilibratory stress distribution and the maximum principal stress distribution than the straight type in linear finite elements analysis. Conclusion: According to the research, the removal torque values were decreased at 7 days group of the tapered type and 11 days group of the straight type after the insertion of the orthodontic miniscrew implants in tibiae of rabbits. Considering the human bone activity, it is better to apply the orthodontic force $3{\sim}4$ weeks later than to apply it immediately after the insertion of orthodontic miniscrew implants. Considering that general orthodontic force is about $250{\sim}500$ grams, the tapered type can be worked as a stable skeletal anchor age in an orthodontic treatment even if the orthodontic force is applied on it immediately after the insertion of it.

• 구강회복응용과학지
• /
• 제27권3호
• /
• pp.293-304
• /
• 2011

구치부 가위교합을 개선하기 위한 여러 방법 중, 교정용 미니임플란트(OMI)와 조합된 Dragon helix를 이용한 방법이 이전에 소개된 바 있으며 이는 간접 골성고정원의 역할이 중요하다. 이에 본 연구에서는 간접골성고정원으로 사용된 OMI의 식립각도에 따라 나타나는 구치부의 치근에 나타나는 응력분포와 OMI의 표면에서의 응력 분포 및 변위를 유한요소 해석으로 비교하고자 하였다. 상악 제1대구치와 상악 제2소구치의 치근 사이에 OMI의 식립 각도를 골 표면에 대하여, $45^{\circ}$, $60^{\circ}$, $90^{\circ}$으로 변화시키면서 최대응력분포와 변위를 관찰하였다. OMI의 식립 각도가 $90^{\circ}$일 때 상악 제1대구치와 상악 제2대구치의 구개 치근첨에 최대응력분포가 나타났고, 상악 제1대구치에서는 협측으로 변위의 양이 가장 적게 나타났으며, 상악 제2대구치에서는 함입 및 구개측으로의 변위량이 가장 크게 나타났다. OMI에서는 식립각도가 감소됨에 따라 최대 응력분포가 나사첨 부분으로 이동되었으며, 그에 따라 OMI의 변위량은 증가하였다. 이상의 결과로 OMI의 식립각도가 $90^{\circ}$일 때 고정원의 역할이 최대가 되었으며, 구치부 가위교합의 개선 효과가 가장 크게 나타남을 알 수 있었다.

• 지질공학
• /
• 제25권1호
• /
• pp.115-129
• /
• 2015

대단면 터널 입구부의 대절토 사면은 불안정한 응력분포 및 소성변형 가능성으로 인해 잠재적 취약부로 인식되고 있다. 본 사례연구에는 대단면 터널 갱구부 대절토 사면의 강우 후 유실사고 및 원인규명, 복구공법을 분석하여 제시하였다. 대상 현장은 46 mm의 강우 후 암반의 불연속면을 따라 대규모 평면파괴가 발생하였으며, 상부 절토사면의 불안정을 야기하였다. 지질조사 및 매핑 자료 분석 결과, 붕괴 원인은 풍화된 암반의 불연속면에 협재된 충전물과 지반 포화로 인한 절리면 연화(softening)로 판단되었다. 알칼리 장석이 풍부한 화강편마암은 풍화에 취약한 것으로 나타났다. 침하량 계측자료 분석 결과, 붕괴 직전에 급격한 변위량 증가를 관찰하였으며, 향후 사면 계측관리에 활용할 수 있을 것으로 판단된다. 응급복구 대책으로 콘크리트 공동충전 및 외부로부터 압성토 채움을 성공적으로 시행하였다. 항구복구 대책으로 사면부에는 격자블럭 및 지중 앵커 시스템을, 터널 측벽부에는 추가 락볼트 보강 및 그라우팅 공법을 성공적으로 적용하였다. 한계평형해석과 평사투영해석을 통해 원 사면의 불안정성과 보강방법의 유효성을 확인하였다. 본 사례연구는 향후 유사한 대절토 사면에 귀중한 참고자료로 활용될 것으로 기대된다.

• 대한의생명과학회지
• /
• 제13권4호
• /
• pp.251-261
• /
• 2007

A myofiber of skeletal muscle is composed of myofibrils, sarcolemma (plasma membrane), and constameres, which anchor the myofibrils to the sarcolemma. Achvillin is a recently identified F-actin binding muscle protein, co-isolates with dystrophin and caveolin-3 in low-density sarcolemma of striated muscle, and colocalizes with dystrophin at costameres, the specialized adhesion sites in muscle. Archvillin also binds to nebulin and localizes at myofibrillar Z-discs, the lateral boundaries of the sarcomere in muscle. However other roles of archvillin on the dynamics of myofibrillogenesis remain to be defined. The goal of this study is, by using siRNA-mediated gene silencing technique, to investigate the effect of archvillin on the dynamics of myofibrillogenesis in cell culture of a mouse skeletal myogenic cell line (C2C12), where presumptive myoblasts withdraw from the cell cycle, fuse, undergo de novo myofibrillogenesis, and differentiate into mature myotubes. The roles of archvillin in the assembly and maintenance of myofibril and during the progression of myofibrillogenesis induced in skeletal myoblast following gene silencing in the cell culture were investigated. Fluorescence microscopy demonstrated that the distribution of archvillin was changed along the course of myofibril assembly with nebulin, vinculin and F-actin and then located at Z-lines with nebulin. Fluorescence microscopy demonstrated that knockdown of mouse archvillin expression led to an impaired assembly of new myofibrillar clusters and delayed fusion and myofibrillogenesis although the mouse archvillin siRNA did not affect those expressions of archvillin binding proteins, such as nebulin and F-actin. This result is corresponded with that of RT-PCR and western blots. When the perturbed archvillin was rescued by co-transfection with GFP or Red tagged human archvillin construct, the inhibited cell fusion and myotube formation was recovered. By using siRNA technique, archvillin was found to be involved in early stage of myofibrillogenesis. Therefore, the current data suggest the idea that archvillin plays critical roles on cell fusion and dynamic myofibril assembly.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2008년도 제33회 펄프종이기술 국제세미나
• /
• pp.47-70
• /
• 2008

Cost efficiency is today the primary requirement in the paper and board industry. This has led therefore, to a greater preponderance of products with specifically designed functionality to take account of current industry needs. Continually increasing machine coating speeds together with these new coating colour components have put more emphasis on the importance of the correct rheology and water retention of the coating colours to achieve good runnability and end product quality. In the coating process, some penetration of the aqueous phase, to the base paper or board must occur to anchor the pre-coating to the base or the topcoat to the pre-coat. The aqueous phase acts as a vehicle not only for the binder, but also for the other components. If this water or material penetration is not controlled, there will be excessive material shift from the coating colour to the base, before immobilization of the coating colour will stop this migration. This can result in poor machine runnability, unstable system and uneven coating layer, impacting print quality. The performance of rheology modifiers or thickeners on the coating color have tended to be evaluated by the term, "water retention". This simple term is not sufficient to explain their performance changes during coating. In this paper we are introducing a new concept of "material retention", which takes note of the total composition of the coating colour material and therefore goes beyond the concept of only water retention. Controlled material retention leads to a more uniform z-directional distribution of coating colour components. The changes that can be made to z-directional uniformity will have positive effects on print quality as measured by surface strength, ink setting properties, print gloss, mottling tendency. Optical properties, such as light scattering, whiteness and light fastness delivery should also be improved. Additionally, controlled material retention minimizes changes to the coating colour with time in re-circulation giving less fluctuation in quality in the machine direction since it more closely resembles fresh coating for longer periods. Use of the material retention concept enables paper and board producers to have more stable runnability (i.e. lower process costs), improved end product quality (i.e. better performance of used chemicals) and/or optimized use of coating colour components (i.e. lower total formulation cost)

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권6호
• /
• pp.19-26
• /
• 2021

교량 받침장치부는 상부구조의 수직하중을 지지하여 하부구조에 전달하고, 교량의 붕괴사고를 방지하는 역할을 한다. 하지만, 포항지진에 의하여 총 12개 도로교량의 받침장치 몰탈 파손, 받침장치 파손 및 쐐기 손상이 보고되었다. 본 연구에서는 지진시 교량 받침장치부의 구조 시스템 특성을 고려하여 교각의 코핑부와 무수축몰탈을 포함한 면진받침 장치 실험체의 전단 거동특성 및 손상모드를 평가하였다. 받침장치 쐐기에 대한 영향을 확인하기 위하여 쐐기 설치 유무를 변수로 설정하였으며, 압축-전단 실험을 실시하여 면진장치의 전단 거동특성과 손상모드를 확인하였다. 또한 유한요소해석을 통하여 받침장치의 거동특성 및 각 구성요소별 손상원인을 분석하였다. 실험결과, 쐐기의 충돌 및 손상 발생 이후 급격한 하중변화가 발생하였으며, 받침장치와 무수축몰탈 경계부를 따라 균열이 발생하였다. 쐐기 유무에 따른 쐐기, 앵커 소켓 및 무수축볼탈의 응력거동을 비교함으로써 지진시 교량받침장치부의 손상원인을 규명하였다.

• 헤리티지:역사와 과학
• /
• 제53권4호
• /
• pp.100-117
• /
• 2020

국보 제101호로 지정된 원주 법천사지 지광국사탑은 조성 후 수차례 이전 및 이건되었는데, 특히 한국전쟁 시 폭격으로 인한 심각한 훼손으로 1957년 전면적인 해체·보수가 이루어졌다. 당시 재료 및 수리 내용이 남아있지 않지만 보존 처리를 진행하면서 지광국사탑에 사용된 다양한 형태의 금속재료를 확인하였다. 각 부재를 연결하는데 꺽쇠 및 앵커볼트 외에 두께 9mm의 원형철근이 주로 사용되었으며, 부재와 모르타르 복원재를 연결하기 위해 다양한 두께의 원형철근과 철사 등이 사용되었다. 건축물로 분류되는 석탑에 통상적으로 사용되는 이형철근이 아닌 매끈한 표면의 원형철근이 사용되었다. 이는 모르타르 복원 시 재료가 가진 부착 강도와 결합력 강화를 위해 재료의 형태를 변형시키고, 서로 교차시켜 결속하고 불규칙적으로 꼬아 단면적을 늘리는 등 재료의 단점을 보완한 것으로 확인되었다. 또한 금속학적 분석법을 적용하여 알아본 결과 전체적으로 탄소 함량이 낮은 아공석강 소재로 사용하여 제작하였다. 미세조직 내에는 불규칙한 크기로 분포하는 방울 형태의 비금속개재물이 다수 포함되어 있으나 전체 성분에는 영향을 미치지 않을 정도의 미량으로 포함되어 있다. SEM-EDS의 면 분석으로 검출되지 않는 망간(Mn)과 황(S)이 정량 분석 및 EPMA 분석법으로 확인한 결과 망간황화물(MnS)로 시료의 형태와 관계없이 미세조직 결정립 내에 고르게 분포하고 있다. 철물의 형태 제작 후 작업의 용이성을 위해 2차로 균질화 등 열처리를 실시한 것으로 보여지며, 철물의 두께가 얇아질수록 포함된 탄소 함량이 감소하고 탄성과 신장률이 증가하는 특성에 따라 복원 작업 순서를 정하고 다양한 형태의 철물을 사용한 것으로 보인다.