• Journal of Chest Surgery
• /
• 제27권7호
• /
• pp.603-609
• /
• 1994

Esophageal atresia is a rare congenital anomaly and it usually associated with tracheo-esophgeal fistula and other congenital anomalies. The first report of esophageal atresia with tracheo-esophageal fistula was done by Thomas Gibson in 1696. In 1941, Haight performed the first successful primary anastomosis for esophageal atresia. These accomplishments opened the gateway for clinical studies that have resulted in reinforcements and improvement in the care of infants born with this anomaly. From January 1986 to April 1994, 14 cases of esophgeal atresia with tracheo-esophgeal fistula were diagnosed in Kyung Hee Uinv. Hospital. There were 9 male and 5 female infants. 12 infants were Gross classification type C and 2 infants were type A. The average body weight was 2.7$\pm$0.4kg and Waterson Category A contained 4 infants, B contained 3 infants and C contained 7 infants. Among these infants, 9 infants were underwent anastomosis procedures. We performed retropleural approach in 6 infants, transpleural approach in 2 infants and 1 infant was performed colon interposition through substernal space.By the method of anastomosis, end-to-side anastomosis was performed in 5 infants, end-to-end anastomosis in 3 infants and esophagocologastrostomy in 1 infant.The former 8 infants were Gross classification type C and the latter was type A. Among the type C infants, 6 infants were anastomosed with one layer interrupted suture and 2 infants with 2 layer interrupted suture. Post- operative death was in 1 infant and 8 infants were discharged with good result and have been in good condition.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.192-198
• /
• 2003

A finite element analysis of end-to-end artery/PTFE anastomosis has been presented in this study to evaluate the distribution of compliance and stresses in the vicinity of the anastomosis due to any mismatch in compliance characteristics. The artery wall was assumed to be made of linear isotropic material in this simplified model and a nonlinear analysis and convergency study with respect to increasing meshed element numbers were performed with a mean artery pressure loading of the artery-PTFE model. Also, sub-modeling method was Introduced to progress the accuracy of the finite element analysis. The results are as follow : 1. A hypercompliant zone on the artery side was observed around 4.Omm from the anastomosis and a high hoop stresses in the wall of artery and PTFE was dominant. 2. An artery displays large deformation so that nonlinear analysis and sub-modeling method was used. 3. An anastomosis with the thinner thickness and larger diameter PTFE (B type) could reduce the compliance disagreement.

• Journal of Gastric Cancer
• /
• 제19권3호
• /
• pp.344-354
• /
• 2019

Purpose: No standard technique has been established for esophagojejunal anastomosis during laparoscopic total gastrectomy (LTG) for gastric cancer owing to the technical difficulty and high complication rate of this procedure. This study was performed to compare the short-term outcomes of circular and linear stapling methods after LTG. Materials and Methods: A total of 106 patients treated between July 2010 and July 2018 were divided into 2 groups according to the following anastomosis procedures: hemi-double-stapling technique (HDST; circular stapling method; group C, n=77) or overlap method (linear stapling method; group L, n= 29). The clinicopathological features and postoperative outcomes, including complications, were analyzed. Multivariate analysis was performed using a logistic regression model to identify the independent risk factors for anastomotic complications. Results: The incidence of anastomotic complications was significantly higher in group C than in group L (28.0% vs. 6.9%, P=0.031). The incidence of anastomosis leakage did not differ between the groups (6.5% vs. 6.9%, P=1.000). However, anastomosis stricture occurred only in group C (13% vs. 0%, P=0.018). Multivariate analysis showed that the anastomosis type was significantly related to the risk of anastomotic complications (P=0.045). Conclusions: The overlap method was superior to the HDST with respect to anastomotic complications, especially anastomosis stricture.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.877-882
• /
• 2001

A finite element analysis of end-to-end artery/PTFE anastomosis has been presented in this study to evaluate the distribution of compliance and stresses in the vicinity of the anastomosis due to any mismatch in compliance characteristics. The artery wall was assumed to be made of linear isotropic material in this simplified model and a nonlinear analysis and convergency study with respect to increasing meshed element numbers were performed with a mean artery pressure loading of the artery-PTFE model. Also, sub-modeling method was introduced to progress the accuracy of the finite element analysis. The results are as follow : 1. A hypercompliant zone on the artery side was observed around 4.0mm from the anastomosis and a high hoop stresses in the wall of artery and PTFE was dominent. 2. An artery displays large deformation so that nonlinear analysis and sub-modeling method was used. 3. An anastomosis with the thinner thickness and larger diameter PTFE (C type) could reduce the compliance disagreement.

• 한국식물병리학회지
• /
• 제10권1호
• /
• pp.7-12
• /
• 1994

Incidence of radish disease caused by Rhizoctonia solani ranged from 1 to 30% in fields located at Hwaseong, Naju and Yeoncheon in Korea during the growing seasons in 1989, 1990 ad 1993. A total of 133 isolates of R. solani was obtained from the diseased seedlings, leaves and roots of radish collected. The fungus was most commonly isolated from the roots. Among 133 isolates of R. solani, 56 isolates were classified as anastomosis group AG-1 by anastomosis test, 37 isolates as AG-2-1, and 40 isolates as AG-4. Among the isolates of AG-1, 26 isolates were grouped as cultural type IA, and the others as cultural type IB. Cultural types IA and IB of AG-1, were isolated from the leaves, AG-2-1 from the roots, and AG-4 from the seedlings, leaves and roots. Pathogenicity tests revealed that the AG-1(IA) isolates were highly virulent on leaves of radish, but avirulent on the seedlings, petioles and roots. The AG-1(IB) isolates were highly virulent on the leaves, but mildly virulent on the seedlings and avirulent or mildly virulent on the petioles and roots. The AG-2-1, isolates were mildly virulent on the leaves and seedlings and mildly or highly virulent on the petioles and roots. The AG-4 isolates were highly virulent on the seedlings and mildly or highly virulent on the leaves, petioles and roots.

• Journal of Chest Surgery
• /
• 제20권3호
• /
• pp.635-641
• /
• 1987

Recently, direct atriopulmonary anastomosis was performed in 2 patients without using pericardium or prosthetic material. Case 1 A 13-year-old male patient whose diagnosis was tricuspid atresia [type lb] received direct atriopulmonary anastomosis successfully with good clinical and hemodynamic results. Nine months after operation, he has an increased exercise tolerance. Case 2 A 4-year-old female patient whose diagnosis was DORV with pulmonary atresia in A-V discordance had a formidable surgical challenge. A large-diameter direct atriopulmonary anastomosis was performed after the closure of the right atrioventricular valve. Her postoperative course has been even in 20th postoperative day.

• Advances in pediatric surgery
• /
• 제13권1호
• /
• pp.23-29
• /
• 2007

Tapering enteroplasty was first described by Thomas in 1969 as one method of intestinal anastomosis. The advantages of tapering enteroplasty in the intestinal atresia are: First, it makes end-to-end anastomosis possible between the atretic bowel ends with considerable differences in diameters. Second, it promotes the recover of the postoperative bowel function. Third, it prevents the possibility of the short bowel syndrome by eliminating the need of resecting the dilated bowel. A total of 22 patients with intestinal atresia who underwent tapering enteroplasty from January 1988 to December 2005 at our institute were reviewed. In 3 of 22 cases, tapering enteroplasty was the $2^{nd}$ operation after an initial end-to-oblique anastomosis. We reviewed the following items: age, sex, type and location of intestinal atresia, initial feeding and total enteral feeding start day, the length of hospital stay and complications. The average age of the patients was 7 days. Male to female ratio was 1 to 1.2 (10 cases: 12 cases). We performed the tapering enteroplasty on all types and locations of the intestinal atresia from the duodenum to the colon: type I (n=3), type II (n=4), type IIIA (n=7), type IIIB (n=5), type IIIB and IV (n=1), type IV (n=1) and type C (duodenum) and type IIIB and IV (jejunum). On the average, the oral feeds were started on the postoperative $8.8^{th}$ day, and full caloric intake via the enteric route was achieved on postoperative $13.3^{th}$ day. The average length of hospital stay was 19.6 days. There were 1 case (4.5 %) of anastomotic complication and 2 cases (9 %) of adhesive ileus among 22 patients. The tapering enteroplasty on all types of intestinal atresia is a usefull operative method when there are considerable diameter differences between the atretic bowel ends.

• Archives of Reconstructive Microsurgery
• /
• 제24권2호
• /
• pp.75-78
• /
• 2015

High-pressure (HP) injection injury to the upper extremity often causes a very serious clinical problem, leading to poor outcomes, including amputation, so that a true surgical emergency is required. The outcomes can be improved with emergent wide surgical debridement. However the diagnosis of these injuries is often delayed due to underestimated evaluation at first appearance and lack of common knowledge of the seriousness of this injury. The type and pressure of the infecting material is an important factor in prognosis and organic solvents infected pressure injury can cause poor outcome and increased amputation rate. In this case, we report on reconstruction of HP oil-based paint injection injuries of the finger using T-shaped pedicles and multiple venous anastomoses. In this concept, arterial flow can be maintained by the reverse flow of distal anastomosis when there is difficulty with the proximal anastomosis. And venous flow can be preserved by deep and superficial vein anastomosis. This concept has various advantages including preserving patency of the pedicle in chronic vasculopathy or trauma cases and maintaining the arterial flow by the reverse flow of distal anastomosis and can improve the free flap survival by a two vascular anastomosis system.

• Archives of Plastic Surgery
• /
• 제44권4호
• /
• pp.293-300
• /
• 2017

Background Simulation training is becoming an increasingly important component of skills acquisition in surgical specialties, including Plastic Surgery. Non-living simulation models have an established place in Plastic Surgical microsurgery training, and support the principles of replacement, reduction and refinement of animal use. A more sophisticated version of the basic chicken thigh microsurgery model has been developed to include dissection of a type 1-muscle flap and is described and validated here. Methods A step-by-step dissection guide on how to perform the chicken thigh adductor profundus free muscle flap is demonstrated. Forty trainees performed the novel simulation muscle flap on the last day of a 5-day microsurgery course. Pre- and post-course microvascular anastomosis assessment, along with micro dissection and end product (anastomosis lapse index) assessment, demonstrated skills acquisition. Results The average time to dissect the flap by novice trainees was $82{\pm}24$ minutes, by core trainees $90{\pm}24$ minutes, and by higher trainees $64{\pm}21$ minutes (P=0.013). There was a statistically significant difference in the time to complete the anastomosis between the three levels of training (P=0.001) and there was a significant decrease in the time taken to perform the anastomosis following course completion (P<0.001). Anastomosis lapse index scores improved for all cohorts with post-test average anastomosis lapse index score of $3{\pm}1.4$ (P<0.001). Conclusions The novel chicken thigh adductor profundus free muscle flap model demonstrates face and construct validity for the introduction of the principles of free tissue transfer. The low cost, constant, and reproducible anatomy makes this simulation model a recommended addition to any microsurgical training curriculum.

• Journal of Gastric Cancer
• /
• 제11권4호
• /
• pp.212-218
• /
• 2011

Purpose: Intracorporeal anastomosis during laparoscopic gastrectomy is becoming increasingly prevalent. However, selection of the anastomosis method after laparoscopic distal gastrectomy is equivocal because of a lack of technical feasibility and safety. We compared intracorporeal gastroduodenostomy with gastrojejunostomy using linear staplers to evaluate the technical feasibility and safety of intracorporeal anastomoses as well as its' minimally invasiveness. Materials and Methods: Retrospective analyses of a prospectively collected database for gastric cancer revealed 47 gastric cancer patients who underwent laparoscopic distal gastrectomy with either intracorporeal gastroduodenostomy or gastrojejunostomy from March 2011 to June 2011. Perioperative outcomes such as operation time, postoperative complication, and hospital stay were compared according to the type of anastomosis. Postoperative inflammatory response was also compared between the two groups using white blood cell count and high sensitivity C-reactive protein. Results: Among the 47 patients, 26 patients received gastroduodenostomy, whereas 21 patients received gastrojejunostomy without open conversion or additional mini-laparotomy incision. There was no difference in mean operation time, blood loss, and length of postoperative hospital stays. There was no statistically significant difference in postoperative complication or mortality between two groups. However, significantly more staplers were used for gastroduodenostomy than for gastrojejunostomy (n=6) than for gastroduodenostomy and (n=5). Conclusions: Intracorporeal anastomosis during laparoscopic gastrectomy using linear stapler, either gastroduodenostomy or gastrojejunostomy, shows comparable and acceptable early postoperative outcomes and are safe and feasible. Therefore, surgeons may choose either anastomosis method as long as oncological safety is guaranteed.