• Analytical Science and Technology
• /
• v.26 no.3
• /
• pp.182-189
• /
• 2013

The purpose of this research is to separate and quantitate selenium species in some food samples with HPLC-ICP-MS. Cation exchange chromatography showed efficient separation only for inorganic Se species while reversed phase ion pair chromatography showed good separation for both inorganic and organic Se species. $C_8$ column ($Symmetryshield^{TM}\;RP_8$, 3.5 ${\mu}m$, $4.6{\times}150$ mm) was used with optimum condition of 5% methanol mobile phase, 0.05% of nonafluorovaleric acid ion pairing reagent. Five standard Se species of Se(IV), Se(VI), SeCys(selenocystein), SeMet(selenomethionine) and Se-M-C(seleno methyl cystein) were separated successfully under the optimum condition (mobile phase; 5% methanol, ion-pairing reagent; 0.05% nonafluorovaleric acid, flow rate; 0.9 mL $min^{-1}$). To extract Se species, microwave assisted and enzyme-assisted extraction methods were studied. In enzyme-assisted extraction method, protease I for garlic, protease I plus trypsin for pork and mackerel, and protease XIV for tuna showed the best extraction efficiency. With the optimum condition for each sample, it was found that mostly inorganic Se, SeCys and SeMet are present in the sample studied ranging from few ${\mu}g$ $g^{-1}$ to few tens of ${\mu}g$ $g^{-1}$.

• Journal of Korean Society on Water Environment
• /
• v.32 no.6
• /
• pp.649-669
• /
• 2016

This study explored the analytical conditions for 21 veterinary antibiotics which have been popularly sold in South Korea in 2014 but have not yet been targeted in EPA method 1694. Most of the selected antibiotics were separated by a reverse-phase C18 column with a combination of (buffered) water and organic polar solvent, which was commonly methanol and acetonitrile in the gradient elution mode. Volatile additives such as formic acid, ammonium acetate and ammonium formate were usually added to the mobile phases to minimize asymmetrical and tailing of antibiotics' peaks and to increase their ionization in mass spectrometry. The analytical methods of aminoglycoside antibiotics were distinct from those of the other antibiotics in terms of adoption of ion-pair chromatography (IPC) and hydrophilic interaction liquid chromatography (HILIC) capable of retaining and separating extremely polar compounds due to their hydrophilicity. Trifluoroacetic acid or heptafluorobutyric acid was frequently added to the mobile phase as an ion-pair reagent for the IPC. Tandem mass spectrometry was numerously applied to the detection of antibiotics using positive electrospray ionization (ESI) and the selected reaction monitoring (SRM) mode. All reviewed analytical methods had been/were validated by evaluating recovery, limits of detection and quantification, decision limit or detection capability of the methods.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.649-656
• /
• 2006

The proposed head-space supercritical fluid extraction (SFE) methodology as an alternative to an existing conventional procedure was explored for the determination of organochlorine compounds in aqueous matrix. In this study, polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) were utilized as target analytes. To enhance the recovery efficiency, the factors such as the $CO _2$ density, the extraction time, and the extraction mode were investigated. Furthermore, the analytical procedures and the results obtained were compared with those provided by the conventional method (the U.S. EPA method 8080). Under the optimized conditions, i.e., a combination of static with dynamic SFE mode at 2,000 psi and 40 ${^{\circ}C}$, the head-space SFE methodology gave equivalent or better to the conventional method in recovery efficiencies with clear advantages such as simple sample treatment and fast analysis time as well as reduced solvent and reagent consumption.

• Journal of Wetlands Research
• /
• v.15 no.2
• /
• pp.265-269
• /
• 2013

Nitrogen in water is mainly composed of ammonium, nitrite and nitrate, and which can cause eutrophication. A lot of efforts were made to remove them and the accompanying efforts have been made for the development of analytical methods. Rapid and on site detection methods are required for the analysis of pollutants in water system. Thus, we focused on the development of analytical method for nitrite, and the feasibility study on the nitrite analysis by PVC adsorbent columns coated with BCDMA, Biphenyl and methanol. The adsorbents could effectively adsorb mixed reagent in the range of 4 to 20 $mgNO_2-N/L$ for nitrite detection and show linear relationship with color band length. The adsorbance was influenced by pH.

• Analytical Science and Technology
• /
• v.16 no.6
• /
• pp.458-465
• /
• 2003

The HS (headspace)-SPME (Solid phase microextraction) as rapid and simple method was performed for the determination of volatile fatty acids (VFAs) from the aqueous samples. In-fiber derivatization of VFAs with 1-Pyrenyldiazomethane (PDAM) was applied to improve their sensitivity of detection. In SPME procedure, typical parameters such as effects of solution pH, and salting out reagent and ultrasonication were investigated to improve the extraction efficiency. Based on the developed method, VFAs in wastewater samples were determined by gas chromatography / mass spectrometry-selected ion monitoring (GC/MS-SIM) mode.

• Archives of Pharmacal Research
• /
• v.20 no.2
• /
• pp.184-190
• /
• 1997

A new method based on the chemical reaction has been devised for the sequential analysis of reducing oligosaccharides using 8-amino-2-naphthalenesulfonic acid (ANS), a fluorescent precolumn derivatization reagent for reducing saccharides. The procedure established includes 1) the derivatization of a reducing oligosaccharide to produce a Schiff base, 2) the reduction of the base with sodium cyanoborohydride $(NaBH_3/CN), 3)$ the methoxycarbonylation of the resultant secondary amino group, 4) the cleavage of the glycoside bond next to the reducing end, based on the intramolecular acid hydrolysis by the action of a sulfonic acid group of the ANS derivative, 5) the identification of the liberated reducing end by high-performance liquid chromatography (HPLC), and finally 6) the recovery of the resultant oligosaccharide fragment from the cleavage reaction mixture. The extensive examination of the conditions for the sequential analysis of reducing oligosaccharides resulted in the procedure of simplicity , high selectivity and high recovery. This procedure was found to be useful for the sequential analysis of di-, tri- and tetrasaccharides.

• Analytical Science and Technology
• /
• v.33 no.6
• /
• pp.252-261
• /
• 2020

Currently, the potentiometric titration and the high pressure liquid chromatography (HPLC) method were utilized in Korean Pharmacopoeia XII (KP XII) as well as other pharmacopoeias (USP, EP, BP) for determination of loperamide hydrochloride in raw materials and capsules, respectively. The research objective is to overcome the remaining drawbacks from current methods such as solubility of mobile phase (KP XII), less scientific approach (USP 43) or using paired-ion chromatography reagent which shows some limitations (BP2017 and other formulation monographs). The proposed method was optimized by Design of Experiment (DoE) tool to obtain the satisfied method for determination of loperamide hydrochloride. The optimal condition was performed on the common C18 column (150 mm × 4.6 mm; 5 ㎛) using isocratic elution with the mobile phase containing 40 mM of potassium phosphate monobasic (pH 3.0) and acetonitrile (56:44), at a flow rate of 0.7 mL/min. The optimized method was validated and met the requirements of the International Conference on Harmonization. The developed method was applied to determine loperamide hydrochloride in capsules and can be used to update the current monograph in KP XII.

• Analytical Science and Technology
• /
• v.35 no.4
• /
• pp.153-160
• /
• 2022

A green spectrophotometric method for the determination of cyanide has been proposed using, a green reagent, aqueous extract of blue butterfly pea. The test tube was filled with anthocyanin rich extract (pH 6) and cyanide solution. The reaction was kept constant for 10 minutes at room temperature. The reaction mixture changed color from blue to green as the amount of CN-ions increased. The 620 nm peak intensity increased with CN concentration. Therefore, this wavelength was used for all cyanide analyses. The cyanide calibration curve had a linear range of 0.25-1.00, 1.00-4.00, and 4.00-10.00 mg/L, with a satisfactory correlation coefficient of 0.99 and a LOD of 0.57 mg/L. The recovery ranged from 8.33 to 76.94 percent, indicating that this method is inaccurate at low cyanide concentrations. The intra-day and intermediate precision relative deviations were 0.391-0.871 % and 1.112-1.583 %. An H-bond forms between the C-4 group of the B-carbonyl ring and the HCN molecule according to the B3LYP/TZVP calculation. The method is convenient for cyanide concentrations above the LOQ of 1.09 mg/L, cost-effective, and capable of reducing toxic solvents with acceptable precision. The method could also be used to detect total cyanide in biological, environmental, and industrial waste samples.

• Analytical Science and Technology
• /
• v.36 no.1
• /
• pp.44-52
• /
• 2023

This protocol clarifies a simple and precise method for measuring the activity of xanthine oxidase (XO) enzyme inhibitor. XO enzyme, which accelerates oxidative stress-related disorders through its capacity to generate hydrogen peroxide and superoxide anion radicals (O₂^•-), has been found to be inhibited by several plant extracts. Enzyme samples were incubated with a suitable buffer containing adequate amounts of xanthine as a substrate to determine XO activity. The method depends on direct measurements of uric acid and hydrogen peroxide production to test XO with and without interference. The CUPRAC reagent (Cu(Nc)₂²⁺) was used to inhibit enzyme reaction after incubation was complete. The generated urate and peroxide reduced the Cu(II)-neocuproine complex (Cu(Nc)₂²⁺) to a brightly colored Cu(I)-neocuproine complex (Cu(Nc)₂⁺), which was assessed with a spectrophotometer at 450 nm. XO activity was found to be directly related to the increased absorbance of the colored Cu(I)-neocuproine complex (Cu(Nc)₂⁺). To eliminate catalase enzyme interference, the proposed method used sodium azide and was validated against XO activity using the UV method in matched samples with t-test analysis. The proposed assay can determine XO activity with high precision, as indicated by the correlation coefficient (R² = 0.9935) from comparison with the reference protocol.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.12
• /
• pp.1937-1940
• /
• 2005

A lab-made chemiluminescence system with air pump was developed for monitoring of some metal levels in rain. The air pump enabled injection of 17.7 $\mu$g samples into a glass cell filled with luminol-$H_2O_2$ reagent of typically 300 $\mu$L for chemiluminescence measurement. The monitored trend of total metal ions in the rain collected in our campus was compared with analytical results of each metal ion from GFAAS. The system was also demonstrated to determine $Cr^{6+}$ by reduction to $Cr^{3+}$ using $SnCl_2$. The limit of detection for $Cr^{6+}$ obtained by 4 measurements was 85.0 pg $mL^{-1}$ with a relative standard deviation of 3.4%. Although this system doesn’t have selectivity due to the characteristics of chemiluminescence, application of it to environmental monitoring as a sensor for some transition metal ions was demonstrated.