• Steel and Composite Structures
• /
• 제37권2호
• /
• pp.137-150
• /
• 2020

In this research work, the analytical rotating vibration for functionally graded shell with ring supports are restricted to some volume fraction laws based on Rayleigh-Ritz technique. The frequencies of functionally grade cylindrical shells have been investigated for the distribution of material composition of material with two kinds of material. Stability of a cylindrical shell depends highly on these aspects of material with ring supports. The frequency behavior is investigated with fraction laws versus circumferential wave number, length-to-radius and height-to-radius ratios. The frequencies are higher for higher values of circumferential wave number. The frequency first increases and gain maximum value with the increase of circumferential wave mode. Moreover, the effect of angular speed is also investigated. It is examined that the backward and forward frequencies increases and decreases on increasing the ratio of height- and length-to-radius ratios.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.109-118
• /
• 1999

Lifeline system such as oil or gas pipelines and water supply facilities are vulneratble to seismic damages because they are widely exposed to ground failures. Most seismic design criteria of buried pipelines are based on the notion that the longitudinal compressive strain and therefore buckling controls the design. Buckling analysis of buried pipelines subjected to seismic loading is performed by considering the seismic load as the sinusoidally distributed compressive load on the beam on elastic foundation in contrast to existing studies where the buckling load is treated as an end load on the beam column, An approximated analytical solution is obtained by the energy method and its validity is confirmed by the linearized finite element buckling analysis. The results show the beam mode buckling because longitudinal strains at the buckling loads are substantially lower than the strain at the onset of local buckling.

• Structural Engineering and Mechanics
• /
• 제24권2호
• /
• pp.227-245
• /
• 2006

The performance of a three dimensional non-linear finite element model for hyperelastic material considering the effect of compressibility is studied by analyzing rubber blocks under different modes of deformation. It includes simple tension, pure shear, simple shear, pure bending and a mixed mode combining compression, shear and bending. The compressibility of the hyperelastic material is represented in the strain energy function. The nonlinear formulation is based on updated Lagrangian (UL) technique. The displacement model is implemented with a twenty node brick element having u, ${\nu}$ and w as the degrees of freedom at each node. The results obtained by the present numerical model are compared with the analytical solutions available for the basic modes of deformation where the agreement between the results is found to be satisfactory. In this context some new results are generated for future references since the number of available results on the present problem is not sufficient enough.

• 한국태양에너지학회 논문집
• /
• 제22권3호
• /
• pp.77-87
• /
• 2002

그 열흐름의 방향이 인위적으로 조절 가능한 열다이오드 시스템에 관하여 일차원적 열전달 모델을 통하여 시스템의 열성능을 분석하였다. 열다이오드 시스템은 다수의 폐회로 유체 순환 루프로 구성되었으며 루프의 양단은 각각 태양열 흡열판과 방열판에 부착되었다. 한편, 열흐름의 방향 조절을 위하여 루프를 구성하는 튜브재의 연결 부위는 회전 가능한 조인트로 연결하였으며 열매체포는 물을 사용하였다. 본 연구에서는 열다이오드 시스템에 대하여 간단한 1차원 모델을 이용하여 시스템의 열성능을 평가하였으며 아울러 실측 결과와의 비교를 통하여 본 모델의 적용을 통한 시스템의 장기 예측에 대한 가능성을 확인하였다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 추계학술대회 학술발표 논문집
• /
• pp.468-473
• /
• 1998

An intelligent multimode target tracking algorithm using fuzzy logic is presented. Multimode tracking represents a synergistic approach that utilizes a variety of tracking techniques(centroid, correlation, etc.) to overcome the limitations inherent in any single-mode tracker. The design challenge for this type of multimode tracker is the data fusion algorithm. designs for this algorithm are based on heuristic rather than analytical approaches. A correlation-tracking algorithm seeks to align the incoming target image with a reference in age of the target, but has a critical problem, so called drift phenomenon. In this paper we will suggest a robust correlation tracker with gradient preprocessor combined by centroid algorithm to overcome the drift problem.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.2017-2032
• /
• 2018

This study presents, for the first time, state-of-the art review of the various techniques for the modeling of the electrostatic discharge (ESD) generators for the ESD analysis and testing. After a brief overview of the ESD generator, the study provides an in-depth review of ESD generator modeling (analytical, circuit and numerical modeling) techniques for the contact discharge mode. The proposed techniques for each modeling approach are compared to illustrates their differences and limitations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.244-249
• /
• 1997

The enclosure with a small opened area is extensively used in power plants to reduce the propagating noise from transformers. The radiation impedance associated with the location and width of the opened area, and the geometric configurations of internal acoustic field is very important to determine the basic acoustic characteristics of this partial enclosure. In this study, two-dimensional rectangular chambers with opened areas are investigated to examine the acoustic properties of the enclosure. The mode expansions of the physical variables defined on boundary surfaces are introduced to derive a simple algebraic equation. The acoustic characteristics can be easily predicted by this analytical approach, and the results well agree with physical grounds. Physical concepts as results of this work will be helpful to use the partial enclosure as a noise control element.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.739-744
• /
• 2001

In order to investigate the stability of magneto-rheological fluid based squeeze film damper (MR-SFD), its negative stiffness effect, which arises from magnetization of MR-SFD, is identified theoretically and experimentally. The analytical model of MR-SFD includes the magnetic circuit as well as the displacement stiffness associated with the squeeze mode of MRF. Extensive experiments are carried out to measure the magnetic attraction forces generated in the MR-SFD, with the excitation frequency and the eccentricity of the journal varied, which are controlled by an active magnetic bearing. The simulation and experimental results are found to be in good agreement. It is concluded that the negative stiffness effect dominates only in the low frequency region because its effect diminishes in the high frequency region due to the eddy-current loss.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.674-679
• /
• 2000

This research is concerned with the modeling technique and active vibration controller design for slewing smart structures. When cantilever beam rotates about axes perpendicular to the undeformed beam's longitudinal axis, it experiences inertial loading. Hence, the beam vibrates from the initial stage of slewing, In this paper, the analytical model for a single slewing flexible beam with surface bonded piezoelectric sensor and actuator is developed using the Hamilton's principle with discretization by the assumed mode method. It is found from experiments that the theoretical model lacks the frictional effect. The frictional effect is incorporated into the equations of motion by employing the coupling factor. Theoretical and experimental results show problems arising in modeling and controller design.

• Bulletin of the Korean Chemical Society
• /
• 제19권6호
• /
• pp.689-695
• /
• 1998

Carbobenzoxy-alanyl-thiaarginine benzyl ester and carbobenzoxy-alanyl-thialysine benzyl ester were synthesized in solution. Kinetic studies were carried out using three different analytical methods, semi-classical method, progress curve analysis and competitive spectrophotometry. In competitive spectrophotometry, carbobenzoxy-valyl-glycyl-arginyl-p-nitroaniline was used as a detector. Kinetic constants such as $K_m$ and $V_{max}$ measured by competitive spectrophotometry are almost the same as those values measured by semi-classical method. Colorimetric Ellman's assays showed the thio-peptido mimetics to be a suitable substrates for trypsin. Kinetic studies with trypsin gave $K_m$ of 2.33 mM and $k_{cat}$ of $1.50{\times}10^5\;min^{-1}$ for carboxy-alanyl-thiaarginine benzyl ester and $K_m$ of $3.41{\times}10^{-3}\; Mm\; and\; k_{cat}\; of\; 520{\times}102\; min^{-1}$ for carbobenzoxy-alanyl-thialysine benzyl ester, respectively. Kinetic constants $(K_m=2.04{\times}10^{-2}\; mM, K_{cat}=4.42{\times}10^3 \;min^{-1})$ for natural substrate, carbobenzoxy-alanyl-lysine benzyl ester, were also evaluated by competitive spectrophotometry in order to compare the mode of binding on trypsin.