• Computational Structural Engineering
• /
• v.2 no.2
• /
• pp.62-72
• /
• 1989

This study presents rational methods for probability-based estimates of basic design wind speeds in Korea and proposes a risk-based nation-wide map of design wind speeds. The paper examines the fittings of the extreme Type I mode to largest yearly non-typhoon wind data from long-term records, and to largest monthly non-typhoon wind data from short-term records. For the estimation of the extreme typhoon wins speed distribution, an indirect analytical method based on a Monte-Carlo simulation is applied to typhoon-prone regions. The basic desig wind speeds for typhoon and non-typhoon winds at the sites of concern are made to be obtained from the mixed model given as a product of the two distributions. The results of this study show that the proposed models and methods provide a practicable tool for the development of the risk-based basic design wind speed and the design wind map from short-term station records currently available in Korea.

• Journal of Haehwa Medicine
• /
• v.6 no.1
• /
• pp.567-584
• /
• 1997

Most of cancer therapy consists of surgery, chemotherapy and radiotherapy developed by modern western medicine. Often Korean patients use both modem western and oriental medicine through their cancer life. This study tried out to answer the the question : "What are the experience of a Korean cancer patients who follow oriental medicine after cancer diagnosis?" To answer to that, a micro-ethnographic research method was used. Total 6 patients were observed from March, 1996 to February, 1997. Data were obtained through interview, participant observation, audio-tape recording, field recoding, field note-taking, and ralated documents Using an analytical tool known as "pencil and scissors", the data were analyzed. First, I learned patietnts' accounts for cancer experience following oriental medicine, and I could found that they expereinced "feeling of uncertainty" through cancer life. Second, major argument was searched. : Feeling of uncertainty of cancer patients was extremely increased after cancer diagnosis. Oriental Medicine made cancer patients not only expect to improve general physical condition, but also gave them significnat emotional support to overcome their feeling of uncertanty. Third, I examined how did this argument form meanings in the context of individual life. Modem western mediacal service system could not satisfy cancer patients' informational and emotional need. But oriental medicine contribute to relieve the degree of their feeling of uncertainty. As a result of these understandings, I suggest that modern wetern medicine need to be concerned to feeling of uncertainty of cancer patietns and infomational service, and oriental medicine counsel with cancer patients much more systemically. Also nurses must improve cancer education with more accurate and practical information based on empirical data.

• Journal of the Korean Society of Costume
• /
• v.55 no.1 s.91
• /
• pp.151-164
• /
• 2005

In the modern popular culture, a significant code is not the truth itself but the seeming truth. To fulfill this function, it is a mythology that has a transcendental power to eliminate any doubt and mystery. That is to say, cultural uniqueness is understood as an identical thing through mass communication, and people perceive it as a similar cultural community. In this process, mythology form and accumulate the matrix of mythological meaning by eliminating the difference between the reality and the illusion. Such a matrix forces a meaningless and unconditional truth and practice without any criticism and reconsideration. This paper tries to extract art and cultural characteristics of mythological image through examining the relationship among mythological image, history, and ideology. For this aim, we make use of Roland Barthes' signs and Daniel Boorstin's image as a basic analytical tool. After that we examine the characteristics of mythological image appeared in modern cultural discourses and the relationship between mythological image and modern popular culture. Furthermore, we consider the mythological image expressed in modern fashion, which has the nature of commodity aesthetics.

• Smart Structures and Systems
• /
• v.15 no.3
• /
• pp.555-576
• /
• 2015

The large number of long-span bridges constructed in China motivates the applications of structural health monitoring (SHM) technology. Many bridges have been equipped with sophisticated SHM systems in the mainland of China and in Hong Kong of China. Recently, SHM technology has been extended to field test systems. In this view, SHM can serve as a tool to develop the methods of life-cycle performance design, evaluation, maintenance and management of bridges; to develop new structural analysis methods through validation and feedback from SHM results; and to understand the behavior of bridges under natural and man-made disasters, rapidly assess the damage and loss of structures over large regions after disasters, e.g., earthquake, typhoon, flood, etc. It is hoped that combining analytical methods, numerical simulation, small-scale tests and accelerated durability tests with SHM could become the main engine driving the development of bridge engineering. This paper demonstrates the above viewpoint.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1835-1840
• /
• 2004

The HANARO, a multi-purpose research reactor of 30 MWth, open-tank-in-pool type, has been under normal operation since its initial criticality in February, 1995. The HANARO is composed of inlet plenum, grid plate, core channel with flow tubes and chimney. The reactor core channel is located at about twelve meters (12 m) depth of the reactor pool and cooled by the upward flow that the coolant enters the lower inlet of the plenum,. rises up through the grid plate and the core channel and comes out from the outlet of chimney. A guide tube is extended from the reactor core to the top of the reactor chimney for easily un/loading a target under the reactor normal operation. But active coolant through the core can be quickly raised up to the top of the chimney through the guide tube by a jet flow. This paper describes an analytical analysis that is the study of the flow behavior through the guide tube under reactor normal operation and unloading the target. As results, it was conformed through the analysis results that the guide jet is suppressed under the top of the chimney after modifying the orifice diameter of 37.5 mm to 31 mm.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.6
• /
• pp.22-27
• /
• 2012

Drilling process is usually the most efficient and economical method of making a hole in a solid body. However, there have been no analytical method to assess drilling process based on the shear and frictional characteristics. In this paper, procedures for analyzing shear and frictional processes of drilling have been established by adopting an equivalent turning system to drilling. A series of drilling experiments were carried out with varying feed, velocity and drill shape factors. Using the results of the experiments, the cutting characteristics including shear in the primary shear zone and friction in the chip-tool contact region of drilling process have been analyzed. The specific cutting energy tends to decrease exponentially with increase of feed rate. In drilling process 35-40% of the total energy is consumed in the friction process. This is greater than that of turning process in cutting of the same work material.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.5
• /
• pp.94-100
• /
• 2003

One of unique characteristics of guided waves is a dispersive behavior that guided wave velocity changes with an excitation frequency and mode. In practical applications of guided wave techniques, it is very important to identify propagating modes in a time-domain waveform for determination of detect location and size. Mode identification can be done by measurement of group velocity in a time-domain waveform. Thus, it is preferred to generate a single or less dispersive mode But, in many cases, it is difficult to distinguish a mode clearly in a time-domain waveform because of superposition of multi modes and mode conversion phenomena. Time-frequency analysis is used as efficient methods to identify modes by presenting wave energy distribution in a time-frequency. In this study, experimental guided wave mode identification is carried out in a steel plate using time-frequency analysis methods such as wavelet transform. The results are compared with theoretically calculated group velocity dispersion own. The results are in good agreement with analytical predictions and show the effectiveness of using the wavelet transform method to identify and measure the amplitudes of individual guided wave modes.

• Culinary science and hospitality research
• /
• v.6 no.1
• /
• pp.25-55
• /
• 2000

The Development of a new menu item in a restaurant usually begins when your chef prepares a creative "brainchild" that he serves to you, the owner. If you are satisfied with the new dish, It gets a "go-ahead" signal, under the assumption that what appeals to you will appeal to a significant number of your customers. While many excellent and successful items have been created this way, It is not reasonable to expect that your tastes can represent the wide variety of your potential guests tastes. The purpose of this study is to examine the factors that have an influence on customers′ menu evaluation. A menu is a marketing tool which delivers restaurant′s image and message to customers needs and wants to restaurant. So far, studies on menu have been done in an analytical way from a management′s viewpoint and inadequate to reflect customers′ needs and wants. In this study is to examine the factors that have an influence on customers′ menu evaluation. The factors affected the customers′ menu evaluation of hotel restaurant in the three factors. Three factors are food service factor, menu copy factor, value of food. Correlation between the evaluation of criteria and selection of menu was examined. All Three evaluation criteria have shown strong correlation with selection of menu of these criteria, menu-copy factor was found to be most strongly correlated with selection of menu. In conclusion, As a study on the Customer′s evaluation factors of the Korean restaurant menus in hotels, It raises to exert us strength in the menu management of Korean restaurant.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.11
• /
• pp.1819-1824
• /
• 2006

The general objective of the present study was to investigate the potential application of the UV spectroscopic method for determination of the polymeric additives present in papermaking fibrous stock solutions. The study also intended to establish the surface-chemical retention model associated with the adsorption kinetics of additives on fiber surfaces. Polyamide epichlorohydrin (PAE) wet strength resin and imidazolinium quaternary (IZQ) softening agents were selected to evaluate the analytical method. Concentrations of PAE and IZQ in solution were proportional to the UV absorption at 314 and 400 nm, respectively. The time-dependent behavior of polymeric additives obeyed a mono-molecular layer adsorption as characterized in Langmuir-type expression. The kinetic modeling for polymeric adsorption on fiber surfaces was based on a concept that polymeric adsorption on fiber surfaces has two distinguishable stages including initial dynamic adsorption phase and the final near-equilibrium state. The simulation model predicted not only the real-time additive adsorption behavior for polymeric additives at high accuracy once the kinetic parameters were determined, but showed a good agreement with the experimental data. The spectroscopic method examined on the PAE and IZQ adsorption study could potentially be considered as an effective tool for the wet-end retention control as applied to the paper industry.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.11
• /
• pp.1851-1853
• /
• 2006

We herein report a new analytical application of XPS to the identification of organic molecules in room temperature ionic liquid for the first time. An organic compound, propargylamine (1), produced in 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][$PF_6$]), which is one of the room temperature ionic liquids (RTILs), via $A^3$ coupling reaction, is characterized by means of x-ray photoelectron spectroscopy (XPS) rather than using conventional organic compound analysis techniques. There are four non-equivalent carbons in RTILs and 1 each. The ratios of normalized integrated areas of the deconvoluted binding energy of core electron of carbon (C1s) peaks are well matched to the number of carbons in those compounds. The binding energies of C1s of the featured carbons in 1, C4 (sp carbons in acetylene group) and C5 ($sp^2$ carbons in benzene ring), are assigned 286.2 and 285.4 eV, respectively. These results will be able to provide an important tool and a new strategy for the analysis of organic molecules