• Journal of Korean Society of Water and Wastewater
• /
• v.38 no.2
• /
• pp.69-81
• /
• 2024

In this study, an evaluation system that can be used to evaluate the feasibility of developing and supplying hydrothermal energy for the operation of large-scale complex facilities was developed. To this end, this study derived factors to be considered when selecting a location for the use of hydrothermal energy using raw water from multi-purpose dams and regional water supply systems through literature survey and expert interviews. The evaluation indicators derived from this study are divided into four sectors: hydrothermal energy utilization factors, location factors, planning factors, and disaster safety factors, and are composed of 10 mid-level indicators and 34 detailed planning indicators. The relative importance of all factors was derived using the Analytic Hierarchy Process (AHP) technique, and the developed evaluation indicators and relative importance were applied to four multi-purpose dam regions in the country. As a result, it was found that in the development and use of hydrothermal energy utilizing regional raw water supply line the urban planning conditions of the supply site can have a greater impact on the location selection results than the hydrothermal energy development itself. Due to the characteristics of the evaluation indicators developed in this study and their nature as comprehensive indicators, it is believed that the results should be applied to determine the overall adequacy of site selection in the early stages of hydrothermal energy development. In the future, it is believed that it will be necessary to analyze the problems in supplying and operating hydrothermal energy using raw water from multi-purpose dams and regional water resources. Based on the analysis the evaluation system developed in this study is expected to be improved and supplemented.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.127-136
• /
• 2012

In this research, customized management performance index for small and medium enterprises in solar energy area was developed. To acquire management performance index, first Delphi technique is applied and secondly, AHP(Analytic Hierarchy Process) used to give weight to each main index and then final management performance index was achieved. By developing management performance index, top management could manage their company more efficiently.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.847-864
• /
• 1995

In this paper we present an integrated methodology for strategic planning in telecommunications standardization. Especially this paper focuses on the method of setting priorities for telecommunications SWAs(Standardization Work Areas) and related SWls(Standardization Work Items). To make a strategic plan for telecommunications standardization in which usually includes prioritization, resource allocation, standardization schedule for each SWA is based on prioritization of SWAs. Our methodology integrated various existing methods including the Analytic Hierarchy Process(AHP) and a modified Delphi technique. Recently, rapid technology evolution in telecommunications fields increases the necessity of developing more and more new standards. Also increased complexity of those technologies makes standards more complicated, more specified and more thick than the past ones. As a result, the number of SWAs and SWIs are being increased constantly. Furthermore, rapid telecommunication environment changes such as deregulation, liberalization, privatization, regionalization, and globalization surrounding standardization bring about new challenges and opportunities. Due to all these trends, strategic planning for telecommunications standardization grows more and more important. To cope with these challenges and also to make the more efficient use of the limited standardization resources including time, financial, human resources, we suggest more logical and rational approach that will be a backbone of strategic plan for telecommunications standardization. The telecommunications standardization planning process involves a MCDM(Multi-Criteria Decision Making) process. The Analytic Hierarchy Process(AHP) is a kind of MCDM approaches. Our method is based on a combination of a modified Delphi technique and an application of AHP(Liberator's spreadsheet model). Analyzed data from Delphi technique is used as inputs to ABP. In addition, we also focus on the technique how to combine group judgments and to handle a large number of comparisons. We present analyzed results including Pilot and Full Scale Survey according to the proposed process. The result of this study will be useful input for telecommunications standardization policy making and practical implementation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.5
• /
• pp.39-47
• /
• 2016

Nowadays, several welding processes are generally used to join parts together, and the materials are generally steel, aluminum, copper, stainless steel, and other difficult-to-weld materials. If a proper welding process is chosen, it is helpful for welding parts. However, there is no desirable technique for appropriately deciding on the welding process in the industry. Therefore, an appropriate method of selecting a welding process is needed for the novice worker in the industry. In this sense, a new analytic network process (ANP) technique is used for effective decision making in welding. By considering several criteria in ANP, a selection method is suggested to decide on the proper welding process. In the study, several criteria were considered for the proper welding of parts. By considering a matrix of prior interdependence effects among various welding processes, a decision-making method based on an ANP is accomplished using a weighting matrix, which is supposed to select an appropriate welding process. In addition, for appropriate decision criteria of the welding process, several factors, such as material, shape, precision, economics, and equipment, are used to accomplish the ANP algorithm. Moreover, the final weighting matrix is calculated following its ANP strategy. Furthermore, this decision-making technique is applied to both stainless razor spot joining and thick steel pipe joining. The results show its reliability and practicality, and the novice engineer and manager can use this technique to determine the best welding process.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.366-378
• /
• 1998

Thermocondensation root canal filling technique have been used to fill accessary canals or to obtain homogeneous root caral fillings. But these thermocondensation technique inevitably produce heat in the canal which can be transmitted through the dentin and cementum and consequently damage periodontal ligamental cells and osteoblasts. In this study, System $B^{TM}$(Analytic technology, WA.D.S.A.) was used to evaluate the reaction of periodontal ligament tissue to "Continous Wave condensation technique" introduced by Buchanan, and the transmitted root surface temperature was measured according to measured root thicknesses. 12 Mandibular incisors of two adult dogs were used for the experiment. 6 controls were filled by lateral condensation technique with sealer.3 specimens were apically filled by Continuous Wave technique at $200^{\circ}C$ for 5 seconds and remaining 3 specimens were additionally backfilled using System $B^{TM}$(Analytic technology, WA.D.S.A.) was used to evaluate the reaction of periodontal ligament tissue to "Continous Wave condensation technique" introduced by Buchanan, and the transmitted root surface temperature was measured according to measured root thicknesses. 12 Mandibular incisors of two adult dogs were used for the experiment. 6 controls were filled by lateral condensation technique with sealer.3 specimens were apically filled by Continuous Wave technique at $200^{\circ}C$ for 5 seconds and remaining 3 specimens were additionally backfilled using System $B^{TM}$ at $100^{\circ}C$ for 20 seconds. Six weeks later, the dogs were sacrificed and the teeth stained with Hematoxylin and Eosin for histologic examination. 6 extracted human teeth were used to measure the transmitted temperature. After cutting off the crown, the canals were prepared and divided into 3 groups with root thickness of 1.5mm, 1.0mm, 0.5mm, 2 teeth in each group. Inside each root canal, System $B^{TM}$ was heated as with the temperature for the apically condensed and the back filled group, and the transmitted heat was measured on the external surface of the root. The temperature of System $B^{TM}$ heat spreader at $200^{\circ}C$ and $100^{\circ}C$ was also measured at root temperature. It can be concluded as follows: 1. In the thin area (200-$250{\mu}m$) of the root, root resorption could be seen even with heating at $200^{\circ}C$ for 5 seconds. 2. When the spreader was heated at $200^{\circ}C$ for 5 seconds and additionally at $100^{\circ}C$ for 20 seconds for backfill, all teeth showed root resorption regardless of their root thickness. 3. The transmitted external root surface temperature was higher as the root thickness decreased and as the heating time increased. In the thermocompaction technique using System $B^{TM}$, the spreader should be heated for the minimal time and used only in the apical area. The heated spreader shouldn't inserted to the binding point of the canal and backfilling should be done with other means of minimally heated gutta percha technique.

• Journal of Information Technology Services
• /
• v.17 no.1
• /
• pp.59-77
• /
• 2018

Software process (SP) authentication is a certification system designed in order to improve software process and ensure software reliability of the Korean small and medium enterprises (SMEs). It is composed of 3 grades, 17 evaluation items and 70 detailed evaluation items (software process). In order to certificate grade 2, 42 detailed evaluation items must be satisfied. In order to certificate grade 3, all 70 detailed evaluation items must be satisfied. SMEs are more vulnerable to manpower and material resources than the major company. Therefore, it is difficult for SMEs to invest in the long term to improve the software process. If we can provide the core evaluation items to SMEs, SMEs will be able to improve software quality more efficiently and effectively. It can be used as a short way to acquire SP authentication. The evaluation items of SP are defined as influencing each other. Therefore, the core evaluation items might be established using related techniques. Although we searched for previous researches and related informations, the associated study was insufficient. In this study, ANP (Analytic Network Process) technique was applied, and the core evaluation items of SP authentication were established. SMEs will be able to acquire SP authentication more easily using the core evaluation items. Finally, we expect that this study will be used as a basis material for creating the SP 2.0 version.

• Advances in environmental research
• /
• v.7 no.1
• /
• pp.1-11
• /
• 2018

Textile factories are one of the industries which its wastewater treatment is a challenging issue, especially in developing countries and a conventional treatment cannot treat all its pollutants properly. Using chemical coagulants is a technique for physical and chemical primary treatment of the wastewater. We applied jar test for selection of suitable coagulant among the five coagulants including alum, calcium hydroxide, ferrous sulfate, ferrous chloride and barium chloride for the effluent of wastewater in Mazandran textile factory located in Mazandran Province, Iran. In addition, jar test, we also used analytic hierarchy process (AHP) method considering criteria which included coagulation cost, sensitivity to pH change, the amount of sludge generation and side effects for coagulation. The results of the jar test indicated that calcium hydroxide was proper among the coagulants which it removed 92.9% total suspended solid (TSS), 70% dye and 30% chemical oxygen demand. The AHP analysis presented that calcium hydroxide is more suitable than other coagulants considering five criteria.

• Health Policy and Management
• /
• v.16 no.1
• /
• pp.73-94
• /
• 2006

This study was carried out to show how the Analytic Hierarchy Process technique could be used in setting the priority among selected diseases to increase the range of health insurance benefit. Thirty experts, including doctors (group1), experts for preventive medicine or public health(group2), and representatives of the insured(group 3), participated in the study panel that is conducted for priority setting. They were asked to evaluate the priorities among 6 selected criteria and then 42 selected diseases. The results were as follows; First, representatives of the insured think that the magnitude of out-of-pocket payment should have high priority while doctors think that effectiveness of treatment should have high priority. Second, all experts think that catastrophic diseases such as malignant neoplasm, major heart disease, and cerebral vascular disease should have high priority in health insurance coverage even though there is little difference among groups. These results can be useful to establish a systematic strategy for expanding health insurance benefit package.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.274-279
• /
• 1991

The development of a guided weapon system, such as a tactical missile, requires a performance analysis of a nonlinear system. Generally, the Monte Carlo analysis method is used for this purpose. The limitation of this method, a large number of simulations, for a nonlinear system performance analysis strongly motivated the development of a more efficient analytic technique. In this paper, the statisfical linearization methods is used for the performance analysis to the guided weapon system with the help of covariance analysis technique. Because the statistical linearization methods cannot be used to the look-up table nonlinear form such as aerodynamic coefficients, the second order polynomial representations is obtained from the table using the Lagrange interpolating polynomial and linearized statistically. Simple simulations about initial state conditions and random component in guidance command shows the results of this technique.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.7
• /
• pp.97-104
• /
• 1997

Using the ray optics technique, we derive the analytic expressions of TE mode coupling coefficient for five-layer distributed feedback (DFB) structure devices. We compare the coupling coefficient calculated by the ray optics technique with those calulated by the extended additional layer method (EALM) which may be a most accurate method of calculating the coupling coefficient. The difference between the results of the ray optics technique and those of the EALM is small for most cases of grating depth and forms being practically made. In the case of rectangular gratings, the difference increases as the duty cycle of graing deviates from 0.5. In the case of the trapezoidal grating, the difference increases as the ratio of the top to the period of grating deviates from 0.5 and as the length of the top becomes longer than that of the base. The difference of theree-layer DFB structures is smaller than that of five-layer DFB structures.