• 한국음향학회지
• /
• 제37권2호
• /
• pp.92-98
• /
• 2018

본 논문은 모형 프로펠러를 대상으로 공동수조 시험, 수중 충격시험, 유한요소해석 및 전산유체해석에 기반하여 수행한 명음 발생 메커니즘 연구이다. 선미 유동을 모사하기 위해 반류망, 프로펠러 및 방향타를 설치하고 수중청음기와 가속도계로 프로펠러 명음 현상의 발생과 소멸을 계측하였다. 유한요소해석을 통해 프로펠러 날개의 고유진동수를 예측하고 접촉 및 비접촉식 충격시험으로 이를 검증하였다. RANS(Reynolds Averaged Navier-Stokes) 방정식 기반 전산유체해석을 통하여 프로펠러 날개 각 단면의 유속과 유효 받음각을 계산하였으며, DES(Detached Eddy Simulation) 기반 고해상도 해석을 통해 명음 발생 위치에서 2-D 날개 단면 뒷전의 와류흘림주파수(vortex shedding frequency) 계산을 수행하였다. 수치적으로 예측된 와류흘림주파수는 모형시험으로 계측한 명음 발생 주파수 및 날개 고유진동수와 일치함을 확인하였다.

• 한국군사과학기술학회지
• /
• 제14권3호
• /
• pp.345-352
• /
• 2011

This paper focuses on the properties analysis of 9mm bullet dual structure core to substitute current lead core by environment-friendly combination of W-Cu-Ni system high density composite materials. So the four combination samples were made of dual core with the different center of gravity location backward or forward compare to that of lead type bullet, and we experimented about the performance of 9mm bullet dual structure core. In the experimental results, the outer shape of core of four environment friendly samples on the target maintain marginally, while the current lead core bullets are completely crushed after hitting the target. The penetration depth of environment friendly samples excel seven times to lead type bullet and the three out of four samples with forward adjusted center of gravity penetrate deep as twice as ones backward. The impact tolerance of all four samples satisfies military specification, however, more firing tests are required to improve reliability of scattering distribution.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권1호
• /
• pp.1-7
• /
• 2015

In order to provide some references for suitability of carrier-based aircrafts, this paper studies the flow field of exhaust jets and its impact on the flight deck. The geometrical models of aircraft carrier and carrier-based aircrafts are firstly built, on which unstructured tetrahedral meshes are generated for numerical analysis. Then, this paper simulates the flow field of exhaust jets to evaluate its impact on the Jet Blast Deflector (JBD) and the flight deck, when four carrier-based aircrafts are ready to start off in the bow. The standard k-${\varepsilon}$ equations, three-dimension N-S equations and the Computational Fluid Dynamics (CFD) theory are used in the analysis process. To solve the equations, the thermal coupling of the wind and the jet flow are also considered. The velocity and temperature distributions are provided with the simulation of the CFD software, FLUENT. The results indicate that: (1) this analytical method can be used to simulate aerodynamic problems with complex geometrical models, and the results are of high reliability; (2) the safety working area, the installation scheme of the JBD and the arrangement of the take-off position can be optimized through analysis.

• 한국항공우주학회지
• /
• 제40권7호
• /
• pp.555-563
• /
• 2012

지구궤도 상에는 무수히 많은 우주파편(Orbital debris)이 존재하며 매우 높은 속도로 선회하고 있기 때문에 정상가동중인 인공위성과 충돌 시 위성구조체에 치명적인 손상을 일으킬 수 있다. 본 연구에서는 입자완화유체동역학(Smoothed particle hydrodynamics, SPH)을 이용하여 우주파편과의 초고속충돌로 인해 발생 가능한 저궤도 위성구조체의 손상분석을 수행하였다. 위성구조체의 본체 패널(Panel)로 사용되는 허니콤샌드위치패널(Honeycomb sandwich panel, HC/SP)에 대해 충돌속도에 따른 손상분석을 수행하였으며 위성구조체 내부부품의 안전성 분석을 위해 전자박스가 HC/SP에 직접 부착된 경우와 10cm 오프셋 된 경우에 대한 초고속충돌해석 및 손상분석을 수행하였다. 고도 685km의 저궤도에서 2% 정도의 충돌확률을 갖는 우주파편들을 고려할 때, HC/SP 자체에 관통이 발생하는 것으로 나타났으며 부착형 전자박스의 경우와 오프셋형 전자박스의 경우에는 전자박스에 관통이 발생하지 않고 미소 크레이터(Crater)만 발생되는 것으로 나타났다.

• Composites Research
• /
• 제22권3호
• /
• pp.66-73
• /
• 2009

적층 두께, 면밀도, 질량관성모우멘트는 소재의 구조-역학적 특성을 나타내는 중요한 인자들이다. 본 연구에서는 이와 같은 인자들이 다층-복합재료구조의 내충격 성능에 미치는 영향을 고찰하기 위해 높은 충격자 속도 하에서 탄자한계속도기 최대가 되는 재료-구조 최적화를 수행하였다. 세라믹복합재료, 고무, 알루미늄 그리고 알루미늄 폼으로 구성된 다층-복합재료구조의 최적화를 위해 Florence 모델과 Awerbuch-Bonder 모델을 연계한 통합 모델을 개발하였으며, 구속 조건으로써 적층 두께, 면밀도, 질량관성모우멘트를 함께 사용하였다. 결과에서 알 수 있듯이, 제안된 통합 모델을 통해 계산된 탄자한계속도는 유한표소해석에서의 탄자한계속도와 거의 유사함을 확인하였다. 통합 모델을 바탕으로 재료-구조 최적화를 통해 설정된 다층구조는 최적화를 수행하지 않은 다층구조에 비해 약 10.8%의 탄자한계속도 및 26.7%의 충격흡수에너지 향상이 나타남을 알 수 있다.

• International Journal of Automotive Technology
• /
• 제5권4호
• /
• pp.221-238
• /
• 2004

Wall interactions of direct injection spray were investigated using laser-sheet imaging, shadowgraphy, wetted footprint and phase Doppler interferometry techniques. A narrow-cone high-pressure swirl injector is used to inject iso-octane fuel onto a plate, which has three different impact angles inside a pressurized chamber. Heated air and plate conditions were compared with unheated cases. Injection interval was also varied in the heated case to compare dry- and wet- wall impingement behaviors. High-speed macroscopic Mie-scattering images showed that presence of wall and air temperature has only minor effect on the bulk spray structure and penetration speed for the narrow-cone injector tested. The overall bulk motions of the spray plume and its spatial position at a given time are basically unaffected until a few millimeters before impacting the wall. The surface properties of the impact surface, such as the temperature, the presence of a preexisting liquid film also have a small effect on the amount of wetting or the wetted footprint; however, they have strong influence on what occurs just after impact or after a film is formed. The shadowgraph in particular shows that the plate temperature has a significant effect on vapor phase propagation. Generally, 10-20% faster horizontal vapor phase propagation is observed along the wall at elevated temperature condition. For impingement onto a preexisting film, more splash and evaporation were also observed. Contrary to some preconceptions, there is no significant splashing and droplet rebounding from surfaces that are interposed in the path of the DI gasoline spray, especially for the oblique impact angle cases. There also appears to be a dense spray front consists of large sac spray droplets in the oblique impact angle cases. The bulk of the spray is not impacted on the surface, but rather is deflected by it The microscopic details as depicted by phase Doppler measurements show that the outcome of the droplet impaction events can be significantly influenced. Only droplets at the spray front have high enough Weber numbers for wall impact to wet, splash or rebound. Using the sign of vertical velocity, the time-resolved downward droplets and upward droplets are compared. The Weber number of upward moving droplets, which seldom exceeds unity, also decreases as the impact angle decreases, as the droplets tend to impact less and move along the wall in the deflected spray plume.

• 한국운동역학회지
• /
• 제30권2호
• /
• pp.155-163
• /
• 2020

Objective: This study to identify the mechanism of head impact that occurs during youth soccer game with regard to head injuries in sports. Method: Ten male subjects (age: 10.0±2.0 yrs.) were participated during 10 soccer practices spread out over a time period of 10 weeks. During each soccer game, the participants agreed and wore the X-Patch (wireless accelerometer, gyroscopes). The X-Patch records the head impact mechanics, such as peak linear acceleration (PLA), peak rotational acceleration (PRA), peak rotational velocity (PRV), Head Injury Criterion (HIC), and the location of impact. Results: A total of 501 impacts to the head were measured over the 10 soccer games, PLA 17.8±10.4 g, PRA 3168±2442 rad/s²; PRV 16.1±10.6 rad/s; HIC 11.7±34.2. The severity of impact was classified into 3 ranges; low 10~39 g (482 impacts); medium 40~69 g (17 impacts); and high >69 g (2 impacts). There are no significant differences in PLA and HIC (p=0.08, p=0.15), however PRA and PRV show the differences (p<.05) between each of the participants. For the analysis comparing between the soccer games, there are no significant differences in PLA, PRA, PRV and HIC (p=0.11, p=0.13, p=0.14, p=0.05). Conclusion: Our results indicated that there were significant differences between athletes, especially in terms of rotational acceleration, whereas there were significant differences in linear and rotational based variable between each of the soccer games. Although the vast majority of impacts were below 39 g there were 2 potentially dangerous impacts above 69 g. It is important that future research continuous to measure head impact mechanics during soccer to help understand head injury mechanisms to ensure the safety of athletes.

• Journal of Biosystems Engineering
• /
• 제8권2호
• /
• pp.18-25
• /
• 1983

The binders introduced in Korea were originally designed to be used for Japonica varieties which have realtively long stem and are highly resistant to shattering. In order to use it for Tongil varieties which are short and easy to be shattered, mechanical modifications are necessary to reduce a grain loss incurred during its operation. This study was intended to investigate the binding unit, one of the major factors affecting grain losses. The binding parts of three binders used in Korea were analyzed and the grain loss was experimentally assessed for these binders. The results obtained from this study are summarized as follows: 1. From the motion analysis of discharge mechanism, the trajectory of the discharge arm appeared to be either circular or skewed elliptic. The velocity of a circular path mechanism was constant and smaller than that of a skewed elliptic path mechanism. The discharge grain loss of the former was about twice less than that of the latter. 2. It was found that the grain loss incurred due to the collision of the paddy bundles and ground was considerably high for Tongil varieties. The auxiliary discharge bar gave a significant influence on the motion and posture of the bundles, and the degree of impact on ground. 3. The installation of an auxiliary bar, which guides the paddy bundles smoothly to ground in order to reduce impact when the bundles fall down on ground, appeared to be very effective since the grain losses could be decreased by about 1.6 percentage point. However, the guide bar should be installed after some mechanical modification to reduce the velocity of discharge arm has been made.

• 한국군사과학기술학회지
• /
• 제19권3호
• /
• pp.330-338
• /
• 2016

Impregnation of shear-thickening fluid(STF) into high-strength fabrics makes a considerable improvement on the ballistic performance of fabric armors. Understanding dissipation augmentation due to shear thickening effects on yarn-yarn and yarn-projectile friction is of great importance in liquid armor research. This paper takes a shearthickening effect into account in numerical simulations by using a velocity-dependent friction model. Impact simulations were performed to validate the friction model as well as to evaluate the ballistic performance of STF-fabrics. Impact simulations on neat fabrics were also conducted to provide baseline results for comparison.

• 한국군사과학기술학회지
• /
• 제16권4호
• /
• pp.405-413
• /
• 2013

During the land operations, the enemy's gunnery is the primary threat. For the military vehicle, the bulletproof effect is the one of the important issues regarding the safety of soldiers on duty. Recently, the advanced military vehicles have planned to install armor plates. However, due to the budget problem, it is difficult to equip the protection systems. Hence, the optimum approach to increase bulletproof capability is essential. In this paper, the optimum thickness and component of the armor of military vehicles were evaluated by using finite element analysis for bullet impact effects. To achieve this aim, 7.62mm NATO bullet, 1.6mm steel and Kevlar-29 composite have been modeled and the simulations were conducted with various thickness cases by using MSC Nastran sol 700. Consequently, it was revealed that Kevlar-29 45 Layer is appropriate thickness for 7.62 bulletproof. Furthermore, Kevlar-29 in front of steel was effective by comparison with the back of steel for bulletproof.