• Journal of Preventive Medicine and Public Health
• /
• 제45권4호
• /
• pp.259-266
• /
• 2012

Objectives: This study aims to determine the risk factors predicting rehospitalization by comparing three models and selecting the most successful model. Methods: In order to predict the risk of rehospitalization within 28 days after discharge, 11 951 inpatients were recruited into this study between January and December 2009. Predictive models were constructed with three methods, logistic regression analysis, a decision tree, and a neural network, and the models were compared and evaluated in light of their misclassification rate, root asymptotic standard error, lift chart, and receiver operating characteristic curve. Results: The decision tree was selected as the final model. The risk of rehospitalization was higher when the length of stay (LOS) was less than 2 days, route of admission was through the out-patient department (OPD), medical department was in internal medicine, 10th revision of the International Classification of Diseases code was neoplasm, LOS was relatively shorter, and the frequency of OPD visit was greater. Conclusions: When a patient is to be discharged within 2 days, the appropriateness of discharge should be considered, with special concern of undiscovered complications and co-morbidities. In particular, if the patient is admitted through the OPD, any suspected disease should be appropriately examined and prompt outcomes of tests should be secured. Moreover, for patients of internal medicine practitioners, co-morbidity and complications caused by chronic illness should be given greater attention.

• 한국정보시스템학회지:정보시스템연구
• /
• 제13권1호
• /
• pp.135-159
• /
• 2004

In industrialised countries, innovation is a key source of economic growth. Rrsearch is a key driver of technological innovation and involves the process of systematic investigation and/or experimentation to discover new knowledge. The Governments'industry innovation policy supports a business focus on Research and Development (R&D) through a range of programs in order to achieve these aims. The Innovation Statement (DISR 2000, 20010, launched by the Australian Prime MinisterJanuary 2001, commits an additional ${\$}$3 billion over five years to encourage and support innovation. The Australian Government aims toworld competitive firms and strong research capability in industry to strengthen Australia's international competitiveness and increase national prosperity. It develops policies and programs to enhance investment in innovation. The Australian Government has established a number of R&D funding support programs aimed at increasing the level of R&D in Australia. The backbone of these programs is the tax concession program, which is made up of the 125 per cent R&D tax concession, the 175 per cent premium tax concession and the tax offset. Over 4000 businesses take advantage of the tax concession scheme, which costs the government around ${\$}$400mi11ion a year. This cost is expected to rise to over hall a billion by 2005-06 (commonwealth or Australia, 2003). Ensuring these resources are invested where they provide significant national economic benefits is a major policy issue. In this sense, this paper looks at the appropriateness, effectiveness and efficiency of the R&D tax concession with costs and benefits analysis.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2004년도 춘계학술대회
• /
• pp.95-118
• /
• 2004

In industrialised countries, innovation is a key source of economic growth. Research is a key driver of technological innovation and involves the process of systematic investigation and/or experimentation to discover new knowledge. The Governments' industry innovation policy supports a business focus on Research and Development (R&D) through a range of programs in order to achieve these aims. The Innovation Statement (DISR 2000, 20010, launched by the Australian Prime Minister?in January 2001, commits an additional $3 billion over five years to encourage and support innovation. The Australian Government aims to?build world competitive firms and strong research capability in industry to strengthen Australia's international competitiveness and increase national prosperity.?It develops policies and programs to enhance investment in innovation. The Australian Government has established a number of R&D funding support programs aimed at increasing the level of R&D in Australia. The backbone of these programs is the tax concession program, which is made up of the 125 per cent R&D tax concession, the 175 per cent premium tax concession and the tax offset. Over 4000 businesses take advantage of the tax concession scheme, which costs the government around $400?million a year. This cost is expected to rise to over half a billion by 2005-06 (Commonwealth of Australia, 2003). Ensuring these resources are invested where they provide significant national economic benefits is a major policy issue. In this sense, this paper looks at the appropriateness, effectiveness and efficiency of the R&D tax concession with costs and benefits analysis.

• 식품보건융합연구
• /
• 제3권1호
• /
• pp.1-7
• /
• 2017

The study has made theoretical system by thesis journals at home and abroad, material of the Association of Convenience Store Industry of Korea, materials of Statistics Korea and reference books. First, the study examined convenience store's brand image, cognized value, quality level, reliability upon brand, structural relation of purchasing intention, and designed models and theses. Second, the first questionnaire consisted of test items of precedent study, and inspected in advance to inspect reliability and appropriateness, and made correction and supplemented problems. Third, SPSS and AMOS statistics were used to conduct empirical analysis and to find out conclusion and implications. In this study, the subject was consumers who visited local convenience stores such as GS25, Seven Eleven and CU last 3 months to buy PB food. Consumers' consumption pattern and culture made change to be reasonable and practical owing to aging society, nuclear family, women's entering into the society, one person household consumer, and convenient and prompt buying to make different consumption pattern and to make change of commodity distribution pattern. Convenience store took action against change of the trend to expand business area by new distribution channels to get another growth source. Private brand (PB) food that was distributor's brand was expanded. The PB product has been competitiveness of food service industry.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.1103-1106
• /
• 2004

The objective of this study is to induce the design drought rainfall by the methodology of L-moment including testing homogeneity, independence and outlier of the data of annual minimum monthly rainfall in 57 rainfall stations in Korea in terms of consecutive duration for 1, 2, 4, 6, 9 and 12 months. To select appropriate distribution of the data for annual minimum monthy rainfall by rainfall station, the distribution of generalized extreme value (GEV), generalized logistic (GLO) as well as that of generalized pareto (GPA) are applied and the appropriateness of the applied GEV, GLO, and GPA distribution is judged by L-moment ratio diagram and Kolmogorov-Smirnov (K-S) test. As for the annual minimum monthly rainfall measured by rainfall station and that stimulated by Monte Carlo techniques, the parameters of the appropriately selected GEV and GPA distributions are calculated by the methodology of L-moment and the design drought rainfall is induced. Through the comparative analysis of design drought rainfall induced by GEV and GPA distribution by rainfall station, the optimal design drought rainfall by rainfall station is provided.

• 약학회지
• /
• 제45권2호
• /
• pp.153-160
• /
• 2001

This research developed an intravenous (IV) vancomycin dosing nomogram based on the clinical pharmacokinetic data of Korean adult patients. Total 99 pairs of steady-state peak and trough serum concentrations of vancomycin were obtained from 73 adult patients in a tertiary general hospital. Serum vancomycin concentrations were determined to assess the appropriateness of initial vancomycin dosing. Only 47.2% of the cases were within therapeutic range. To characterize the clinical pharmacokinetics (PK) of vancomycin, PK parameters including elimination rate constant ( $K_{e}$) half-life( $T_{1}$2/), clearance (C $l_{van}$), volume of distribution ( $V_{d}$) were calculated by using one-compartment, first order pharmacokinetic equations. PK parameters were evaluated based on the differences of patients'renal function and age. Regression analysis showed a significant correlation between C $l_{van}$ and $C_{cr}$ (C $l_{van}$ = -1.89+0.914 $C_{cr}$ , r=0.763) and between $K_{e}$ and $C_{cr}$ , ( $K_{e}$=-0.0037+0.00139 $C_{cr}$ =0.724). The relationship between $K_{e}$ and $C_{cr}$ , and the mean $V_{d}$ were utilized for developing the nomogram to individualize the initial dosing regimen of vancomycin for the patients with various degrees of renal functions. The nomogram may be used as an efficient tool to determine safe and effective doses of vancomycin for the Korean adult patients.nts.nts.nts.s.nts.

• Nuclear Engineering and Technology
• /
• 제48권6호
• /
• pp.1412-1422
• /
• 2016

Austenitic stainless steels (ASSs) are widely used for nuclear pipes as they exhibit a good combination of mechanical properties and corrosion resistance. However, high tensile residual stresses may occur in ASS welds because postweld heat treatment is not generally conducted in order to avoid sensitization, which causes a stress corrosion crack. In this study, round robin analyses on stress intensity factors (SIFs) were carried out to examine the appropriateness of structural integrity assessment methods for ASS pipe welds with two types of circumferential cracks. Typical stress profiles were generated from finite element analyses by considering residual stresses and normal operating conditions. Then, SIFs of cracked ASS pipes were determined by analytical equations represented in fitness-for-service assessment codes as well as reference finite element analyses. The discrepancies of estimated SIFs among round robin participants were confirmed due to different assessment procedures and relevant considerations, as well as the mistakes of participants. The effects of uncertainty factors on SIFs were deducted from sensitivity analyses and, based on the similarity and conservatism compared with detailed finite element analysis results, the R6 code, taking into account the applied internal pressure and combination of stress components, was recommended as the optimum procedure for SIF estimation.

• The Journal of Asian Finance, Economics and Business
• /
• 제6권1호
• /
• pp.83-89
• /
• 2019

The purpose of this paper is to examine how the social system of deposit insurance affected the financial market in Korea. Specifically, we want to know how much the risk-seeking behavior of financial institutions has increased or decreased. The most important feature of the deposit insurance system is to prevent the insolvency of financial institutions and to properly protect depositors. In recent studies, it has been argued that characteristics of deposit insurance bring moral hazard of financial institutions and that financial institutions make unreasonably risky investments. Therefore, in this study, we will first examine whether such previous research can be applied to the Korean financial market. Next, we will examine the appropriateness of the differential premium rate that is currently used for each financial institution in the Korean financial market. In order to test the first hypothesis, we used the Capital Asset Pricing Model (CAPM) to calculate the total risk for each financial institution. As a result, significant changes were found in all regions before and after the introduction of the deposit insurance system. As for testing the second hypothesis, we conducted a variance analysis of financial institutions' indexes before and after the introduction of the deposit insurance and we discovered significance of the total risk difference.

• International Journal of Korean Welding Society
• /
• 제2권1호
• /
• pp.15-20
• /
• 2002

This paper describes the weldability and mechanical behavior of JIS S45C medium carbon steel (corresponding to KS SM45C and SAE 1045) for machine structures in CW Nd:YAG laser welding. In general, medium carbon steels have a limited application to the industrial fields in spite of good mechanical characteristics. This is due to welding difficulty because of the high carbon contents and impurities in this material. Therefore, in this study the laser weldability of medium carbon steel with adjusted contents of S and P has been investigated in order to extend the application to medium carbon steels. Several experiments and numerical simulations have been conducted to determine the characteristics of mechanical behavior in CW Nd:YAC laser welds. The results of the simulations concur with the experiment results. From the result of this study, the application possibility of CW Nd:YAG laser welding to medium carbon steel has been confirmed. Also, the appropriateness of mechanical behavior simulation has been verified to analyze and predict the welding phenomena.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2004년도 International Conference on Digital Policy & Management
• /
• pp.145-168
• /
• 2004

In industrialised countries, innovation is a key source of economic growth. Research is a key driver of technological innovation and involves the process of systematic investigation and/or experimentation to discover new knowledge. The Governments' industry innovation policy supports a business focus on Research and Development (R&D) through a range of programs in order to achieve these aims. The Innovation Statement (DISR 2000, 20010, launched by the Australian Prime Minister in January 2001, commits an additional $3 billion overfive years to encourage and support innovation. The Australian Government aims to build world competitive firms and strong research capability in industry to strengthen Australia's international competitiveness and increase national prosperity. It develops policies and programs to enhance investment in innovation. The Australian Government has established a number of R&D funding support programs aimed at increasing the level of R&D in Australia. The backbone of these programs is the tax concession program, which is made up of the 125 per cent R&D tax concession, the 175 per cent premium tax concession and the tax offset. Over 4000 businesses take advantage of the tax concession scheme, which costs the government around $400-million a year. This cost is expected to rise to over half a billion by 2005-06 (Commonwealth of Australia, 2003). Ensuring these resources are invested where they provide significant national economic benefits is a major policy issue. In this sense, this paper looks at the appropriateness, effectiveness and efficiency of the R&D tax concession with costs and benefits analysis.