• Nuclear Engineering and Technology
• /
• v.53 no.1
• /
• pp.344-350
• /
• 2021

As the High Flux Advanced Neutron Application Reactor (HANARO) has been recently required to support new R&D relevant to future nuclear systems requiring a much higher neutron fluence, the development of irradiation capsule technology for long-term irradiation testing was performed in three steps (3, 5, 10 dpa). At first, several design improvements of a standard capsule were suggested based on a failure analysis of the capsule and successfully applied for irradiation testing at HANARO at up to eight reactor operation cycles equivalent to 3 dpa. Based on a schematic stress analysis of the vulnerable parts of the previous capsule, an optimized design of the capsule was made for 5 dpa irradiation. The newly designed capsule was safely out-pile tested up to 450 days, which was equivalent to 5 dpa irradiation in the reactor. The test results were submitted to the Reactor Safety Review Committee of HANARO and irradiation testing for 5 dpa was approved. The capsule was also successfully out-pile tested to evaluate the possibility of irradiation testing for 10 dpa. For a higher neutron fluence exceeding 10 dpa, new capsule technologies, including a new capsule that has a different bottom design and neutron flux boosting capsule, were also suggested.

• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.1048-1064
• /
• 2005

Detection of specific compounds influencing food flavor quality is not easy. Electronic nose, comprised of electronic chemical sensors with partial specificity and appropriate pattern recognition system, is capable of recognizing simple and complex volatiles. It provides fast analysis with simple and straightforward results and is best suited for quality control and process monitoring of flavor in food industry. This review examines application of electronic nose in food analysis with brief explanation of its principle. Characteristics of different sensors and sensor drift. and solutions to related problems are reviewed. Applications of electronic nose in food industry include monitoring of fermentation process and lipid oxidation, prediction of shelf life, identification of irradiated volatile compounds, discrimination of food material origin, and quality control of food and processing by principal component analysis and neural network analysis. Electronic nose could be useful for quality control in food industry when correlating analytical instrumental data with sensory evaluation results.

• Transactions of Materials Processing
• /
• v.8 no.4
• /
• pp.384-392
• /
• 1999

In metal forming, there are problems with recurrent geometric characteristics without explicitly prescibed boundary conditions. In such problems, so-called recurrent boundary conditions must be introduced. In this paper, as a practical application of the proposed method, the precision cold forging of a helical gear has been simulated by a three-dimensional rigid-plastic finite element method and compared with the experiment. The application of recurrent boundary conditions to helical gear forging analysis is proved to be effective and valid. the elastic stress analysis of the die for helical gear forging has been calculated by using the nodal force at the final stage obtained from the rigid-plastic finite element analysis. In order to obtain more precise gear products, the elastic analysis of the die after release of punch and the elastic spring-back analysis of product after ejection have been performed, and the final dimension of the computational product has been in good agreement with that of the experimental product.

• Communications for Statistical Applications and Methods
• /
• v.8 no.2
• /
• pp.507-514
• /
• 2001

In recent years, the development and the embodiment of information analysis system has been sprightly carried out in several fields of study. In this study, as and extension of these studies, we develop a system for multivariate analysis which might be widely used in social and natural sciences. This multivariate analysis system is developed by using multivariate analysis procedures in SAS/STAT software. Also, the system supply users with he environment of GUI(Graphical User Interface), which is constructed with AF(application frame) and SCL(screen control language) of SAS software, in order to help users to use the system with easy.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.238-246
• /
• 1996

When the important structures or components of agricultural machinery are designed, the full-filed methods of stress analysis can provide enough information in order to obtain lighter weight and prevent failure. The photoelasticity has been applicated to solve many practical engineering problems. The coating method provides full-field information, enabling the engineers to determine the complete distribution of surface strains and directly highlighting severely strained areas, especially for the welded frames of agricultural machinery. A combined method of model and prototype for strain analysis of excavator has been successfully applied to improve design. A measuring and recording system controlled by micro-computer and application software for dynamic event was studied. It can be widely used in structural failure analysis under cyclical loading . Typical application concerned stress field of crack tip and failure analysis of some mechanical structures are introduced are in roduced briefly in this paper.

• Economic and Environmental Geology
• /
• v.17 no.4
• /
• pp.315-320
• /
• 1984

The newly discovered minerals found during 30 years have been discovered with election microprobe analysis, and several other new minerals have been described largely on the basis of probe analysis. Widely used types of instrument are the wavelength dispersive spectrometer (WDS) and the energy dispersive Spectrometer (EDS), with emitted X-ray dispersed by a curved crystal that is arranged to satisfy the Bragg equation ($n{\lambda}=2dsin{\theta}$). Atomic Nos of Z 4 to 92 can be analyzed quantitatively if they present in amount exceeding 50~100ppm. The application of the microprobe in mineralogical and geological research is quantitative chemical analysis of grains as small as a few microns in diameter, individual grains in a rock or can be analyzed in thin section and polished section, analysis can be made comparatively short time, methods in non-destructure, to photographical and crystallographical information. This paper was written in order to document data evaluation procedure for quantitative energy dispersive election probe analysis.

• ETRI Journal
• /
• v.42 no.2
• /
• pp.292-304
• /
• 2020

As side-channel analysis and machine learning algorithms share the same objective of classifying data, numerous studies have been proposed for adapting machine learning to side-channel analysis. However, a drawback of machine learning algorithms is that their performance depends on human engineering. Therefore, recent studies in the field focus on exploiting deep learning algorithms, which can extract features automatically from data. In this study, we survey recent advances in deep learning-based side-channel analysis. In particular, we outline how deep learning is applied to side-channel analysis, based on deep learning architectures and application methods. Furthermore, we describe its properties when using different architectures and application methods. Finally, we discuss our perspective on future research directions in this field.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.185-186
• /
• 2022

In this study, a numerical analysis was conducted using a two-dimensional diffusion-wave analysis model to analyze the validity about the application of eco-friendly prefabricated rainwater detention system in grit chamber and permanent pond. As a result of the analysis, it is confirmed that the flood prevention effect, such as a decrease in peak flow rate and a delay in peak time, is excellent, so it is considered reasonable to apply eco-friendly prefabricated rainwater detention system in grit chamber and permanent pond.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.4
• /
• pp.67-76
• /
• 2015

The purpose of this study is to set a direction for the development of men's underwear after analyzing current applications for patent regarding men's special-purpose underwear. In terms of a research method, the disclosed patents and utility models were investigated using the patent information database provided by Korea Institute of Patent Information (KIPRIS, http://www.kipris.or.kr). For this, the patents applied from 1990 to October 2015 were targeted. The keywords used for patent search were 'men's underwear' and 'men's special-purpose underwear.' When searched by the keywords above, a total of 1,089 cases were found. Except for expired or cancelled ones, 243 cases were investigated. Then, annual application trends, current registrations on literature records, classification of utility model right holders and contents by topic were analyzed. In terms of data analysis, frequency analysis, crosstabulation analysis and multiple response analysis were conducted, using SPSS 18.0. The results found the followings: In terms of annual application trends, the number of applications for patent started to gradually increase since 2007. Since 2011, it has rapidly increased. In terms of the number of patent registrations, literature registration was far higher than utility model registration. In terms of application rights, 'individually registered (58.8%)' was higher than 'registered by the organization (41.2%).' Among 243 cases, 'underwear (58%)' was the highest, followed by 'men's underwear-related items (29.2%)' and 'thermals (8.2%).' According to analysis on the details of the patent applied for men's underwear, 'penis-scrotum separation' was most focused, followed by 'disposable product' 'airy features,' 'scrotum protection' and 'structure of underwear.'

• Bulletin of the Korean Chemical Society
• /
• v.14 no.3
• /
• pp.367-370
• /
• 1993