• 한국군사과학기술학회지
• /
• 제21권2호
• /
• pp.173-179
• /
• 2018

Estimating reliability of a non-repairable system using the degradation data, variance assumption such as homogeneity (constant) or heteroscedasticity (time-variant) could affect accuracy of reliability estimation. This paper showed reliability estimation and comparison results under normal conditions using accelerated degradation data obtained from destructive measurements, according to variance assumption of the data at each measurement time. Degradation data from three accelerated conditions with stress factors of temperature and humidity were used to estimate reliability. The $B_{10}$ lifetime was estimated as 1243.8 years by constant variance assumption, and 18.9 years by time-variant variance. And variance assumption provided different analysis results of important stresses to reliability. Thus, accurate assumption of variance at each measurement time is required when estimating reliability using degradation data of a non-repairable system.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권7호
• /
• pp.923-930
• /
• 2009

This study was conducted to compare three models: two random regression models with and without considering heterogeneity in the residual variances and a lactation model (LM) for evaluating the genetic ability of Holstein cows in Korea. Two datasets were prepared for this study. To apply the test-day random regression model, 94,390 test-day records were prepared from 15,263 cows. The second data set consisted of 14,704 lactation records covering milk production over 305 days. Raw milk yield and composition data were collected from 1998 to 2002 by the National Agricultural Cooperative Federation' dairy cattle improvement center by way of its milk testing program, which is nationally based. The pedigree information for this analysis was collected by the Korean Animal Improvement Association. The random regression models (RRMs) are single-trait animal models that consider each lactation record as an independent trait. Estimates of covariance were assumed to be different ones. In order to consider heterogeneity of residual variance in the analysis, test-days were classified into 29 classes. By considering heterogeneity of residual variance, variation for lactation performance in the early lactation classes was higher than during the middle classes and variance was lower in the late lactation classes than in the other two classes. This may be due to feeding management system and physiological properties of Holstein cows in Korea. Over classes e6 to e26 (covering 61 to 270 DIM), there was little change in residual variance, suggesting that a model with homogeneity of variance be used restricting the data to these days only. Estimates of heritability for milk yield ranged from 0.154 to 0.455, for which the estimates were variable depending on different lactation periods. Most of the heritabilities for milk yield using the RRM were higher than in the lactation model, and the estimate of genetic variance of milk yield was lower in the late lactation period than in the early or middle periods.

• 재무관리연구
• /
• 제22권2호
• /
• pp.189-212
• /
• 2005

본 연구는 새로운 정보에 대하여 국채선도금리시장(forward market)과 국채 현물시장(spot market) 중 어느 시장이 더 효율적으로 반응하는지에 관한 분석을 실시하였다. 2002년 3월부터 2005년 1월말까지 3개월, 6개월, 9개월 및 1년물 국채선도금리(forward rate)와 각 시계열들의 현물 금리의 수익률 및 변동성자료를 사용하여 그랜져인과관계분석, 충격반응함수 및 분산분해 분석을 실시하였으며 주요 분석결과는 다음과 같다. 먼저 수익률 및 변동성을 이용한 그랜져인과관계분석(Granger causality test)결과에 의하면 국채 선도금리시장이 국채현물시장보다 새로운 정보에 대하여 더 효율적으로 반응하는 것으로 나타났다. 충격 반응함수(impulse response analysis)에서도 국채선도금리시장의 국채현물시장에 대한 영향력이 국채현물시장의 국채선도금리시장에 대한 영향력보다 더 강하고 지속적인 것으로 나타났다. 분산분해분석(variance decomposition analysis)에서는 전체적으로 3개월 및 6개월 등기간이 짧은 국채선도금리 수익률 및 변동성이 기간이 긴 국채선도금리보다 국채현물시장에 대한 영향력이 상대적으로 더 큰 것으로 나타났다. 이러한 분석결과로부터 새로운 정보에 대하여 국채현물시장보다는 국채선도금리시장이 더 효율적으로 반응하고 있음을 추론해 볼 수 있으며 이는 기존 국내외 주식현물시장과 선물시장들 간의 영향력을 분석한 결과 선물시장의 현물시장에 대한 영향력이 더 강한다는 결과들과 일맥상통하는 것으로 나타났다.

• 응용통계연구
• /
• 제23권2호
• /
• pp.317-323
• /
• 2010

Measures are very useful tools for comparing the shape variability in statistical shape analysis. For examples, the Procrustes statistic(PS) is isolated measure, and the mean Procrustes statistic(MPS) and the root mean square measure(RMS) are overall measures. But these measures are very subjective, complicated and moreover these measures are not statistical for comparing the shape variability. Therefore we need to study some tests. It is well known that the Hotelling's $T^2$ test is used for testing shape variability of two independent samples. And for testing shape variabilities of several independent samples, instead of the Hotelling's $T^2$ test, one way analysis of variance(ANOVA) can be applied. In fact, this one way ANOVA is based on the balanced samples of equal size which is called as BANOVA. However, If we have unbalanced samples with unequal size, we can not use BANOVA. Therefore we propose the unbalanced analysis of variance(UNBANOVA) for testing shape variabilities of several independent samples of unequal size.

• 한방안이비인후피부과학회지
• /
• 제19권3호통권31호
• /
• pp.134-145
• /
• 2006

Objective : This study was carried out to investigate what type of assumption and conditions are needed for the application of various statistical techniques such as descriptive statistics, t-test, analysis of variance, correlation analysis, regression analysis and chi-square test and to evaluate that they are used correctly in the research process. Methods : One more methods of statistical analysis were used in 91 papers among 162 papers selected from the journal of Korean oriental medical Ophthalmology & Otolaryngology & Dermatology from April 2003 to December 2005. So we analysed the type of statistical analysis method in 91 papers(clinical and experimental study) and assessed the their validity of statistical techniques by the check list consisting of 34 items(3 items for validity assessment of descriptive statistics, 6 items for t-test, 7 items for analysis of variance, correlation analysis and regression analysis, respectively, 4 items for chi-square test) Results : 1. The type of 65(40%) cases is experimental trial, the type of 55(34%) cases is case report, the type of 26(16%) cases is clinical trial and the type of 16(10%) cases is review, in 91 papers using statistical techniques among 162 papers selected from the journal of Korean oriental medical Ophthalmology & Otolaryngology & Dermatol-ogy from April 2003 to December 2005. 2. One more methods of statistical analysis were used in the experimental and clinical study. When we classified 125 units using statistical analysis methods in 91 papers according to statistical techniques such as descriptive statistics, t-test, analysis of variance, correlation analysis, regression analysis and chi-square test, the number of independent sample t-test is 33(26%), the number of only descriptive statistics is 28(22%), the number of independent sample t-test is 33(26%), the number of only descriptive statistics is 28(22%), the number of one way ANOVA is 15(12%), the number of non-parametric test 10(8%). 3. After carrying out one way ANOVA, the number of using multiple comparison methods is 15(Scheffe:6(26%), Duncan:4(17%), Dunnett:3(13%), Tukey:2(9%)) out of 23 (total case carrying out one way ANOVA). 8(35%) out of 23 did not enforce multiple comparison methods after carrying out one way ANOVA. 4. From the assessment of validity about 63 cases using statistical techniques(except descriptive statistics), 5(8%) cases are proper, the other 58(92%) are improper, so we recognized a serious misuse of statistical application in our journal. 5. The number of case below 10 sample size in experimental and clinical study(except descriptive statistics) is 31(34%) and frequent. Also the number of case containing no mention of sample size is 41(45%, including culture study). 6. For example of statistical error, there are wrong choice of statistical technique, lack of check on standard assumption(such as standard distribution, equivariance, independence), and so on. Conclusions : We investigated the validity of statistical analysis methods in our journal by check list consisting of 34 items and suggested correct statistical analysis methods. We should practice the spread of education about statistical analysis methods and precis application, enhance objectivity and reliability of our thesis and further correspond with purpose of scientific study.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.862-865
• /
• 2000

The object of this paper is to evaluate the surface roughness using the experimental equation of surface roughness, which is developed in turning by an orthogonal array method. $L_9{3^4}$ orthogonal array method, one of fractional factorial design has been used to study effects of main cutting parameters such as cutting speed, feed rate and depth of cut, on the surface roughness. And the analysis of variance (ANOVA)-test has been used to check the significance of cutting parameters. Using the result of ANOVA-test, the experimental equation of surface roughness, which consists of only significant cutting parameter - feed rate, has been developed. The coefficient of determination of this equation is 0.962.

• 한국공작기계학회논문집
• /
• 제17권4호
• /
• pp.133-139
• /
• 2008

With the increasing demand for higher production quality and growing competition in the global market, coordinate measuring machine(CMM) has been widely used in industry to improve the efficiency and effectiveness of measurement. In this paper the performance evaluation of coordinate measuring machine is proposed using design of experiments. A factorial design is applied to carry out the performance test proposed by ISO 10360 with a length bar and to investigate CMM measurement errors associated to orientation and length in the work volume. The determination of the significance of effects in an experiment is made through the analysis of variance(ANOVA). The results show that the proposed method is suitable to analyze the factors which affect the CMM measurement performance.

• 재활간호학회지
• /
• 제13권2호
• /
• pp.123-131
• /
• 2010

Purpose: This study was aimed at identifying the levels of parenting stress among mothers of children with cerebral palsy and factors influencing parenting stress. Method: The research design was cross-sectional survey. Data were collected from 122 mothers of hospitalized children (under 15 years of age) with cerebral palsy at the Y medical center using the questionnaires. The data were analyzed using one way analysis of variance with Scheffe test for post-hoc analysis or t-test, Pearson correlation, and stepwise multiple regression. Results: The mean score of parenting stress was 2.52 (SD=0.79; range: 1~4). The father's participation, mother's parenting hours, self-esteem and social support were significant predictors of parenting stress, significantly accounting for the 33.3% variance (F=16.118, p<.001). Conclusion: It is essential for health professionals to consider the aforementioned four factors when developing interventions to reduce parenting stress for mothers of children with cerebral palsy.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.108-114
• /
• 2013

This paper describes process optimization for thermal-sprayed Co-based self-flux alloy coating by Taguchi method. Co-based self-flux alloy coatings were fabricated according to $L_9(3^4)$ orthogonal array using flame spray process. Hardness test and wear test were performed, the results were analyzed by analysis of variance(ANOVA) considering a multi response signal to noise ratio(MRSN). From the results of ANOVA, the optimal combination of the flame spray parameters on Co-based self-flux alloy coating could be predicted. The calculated hardness and wear rate of the coatings by ANOVA were found to be close to that of confirmation experimental result.

• 한국수소및신에너지학회논문집
• /
• 제15권1호
• /
• pp.72-81
• /
• 2004

Study on the analysis of sodium spray fire using Gaussian drop size distribution, which redistributes a droplet spectrum with given mean diameter if its size classes with critical diameter(D>8mm) occur, was carried out. In this case, the oversized droplets were reduced to a stable diameter. Results calculated by the code using Gaussian drop size distribution were in better agreement with AI experimental results than those of NACOM and SPRAY code. The effect of variance on pressure in the test cell appeared greatly by introducing Gaussian function, which could represent various sodium droplet size distribution. The increase of the variance with mean droplet size resulted had an important effect upon the pressure in the test cell.