• Korean Journal of Agricultural Science
• /
• v.43 no.3
• /
• pp.369-378
• /
• 2016

Improving the reproductive traits of Hanwoo might decrease their production cost. Therefore, this study was conducted to investigate the effects of environmental factors [registration grade (basic, pedigree or advanced), birth year, birth season, parity, delivery year, and delivery season] on various reproductive traits (age at 1st service, age at 1st conception, age for 1st calving, days at 1st service postpartum, non-pregnant condition period, calving interval, gestation length, and number of services for conception) in Hanwoo (primiparous 12,219 heads, multiparous 10,471 heads). All data was acquired from Gyeongnam province areas which were surveyed from 2007 to 2015. All environmental factors significantly influenced (p < 0.01) reproductive traits of primiparous cows but, but not all environmental factors influenced multiparous cows. Primiparous cows registered as advanced grade showed significantly lower age at 1st service (by 15.36 days), age at 1st conception (by 8.66 days), and age for 1st calving (by 8.77 days) (p < 0.01) than those registered as basic grades. Age at 1st service, age at 1st conception and age for 1st calving were not significantly related to birth year in primiparous cows. As delivery years advanced from 2005 to 2012, all durations associated to reproductive traits tended to be shorter. Days at 1st service postpartum, non-pregnant condition period, and calving interval tended to be shortened as parity increased. Days at 1st service postpartum, days open, calving interval, and gestation in multiparous cows calved in winter were shorter than those in summer. The registration grade was not a effected with reproductive traits in Hanwoo.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.8
• /
• pp.1-18
• /
• 2021

Idol music, which began to gain huge popularity in the domestic music market in the mid-1990s, has become one of the major global contents thanks to the global popularity of K-POP. As a result, the Korean music market continues to grow, forming the world's sixth-largest music market, and domestic music agencies are focusing more on fostering idol groups and producing idol music. The global success of idol music is surprising, but this has resulted in the domestic music market being biased toward idol music. As a result of the study, it was confirmed that there are several problems with the phenomenon of being biased toward similar types of musicians and music content. First, just as trend-oriented cultural contents face the problem of life expectancy all the time, the "Korean Wave" is also forced to think in terms of identity and sustainability. Second, it was observed that only consumers of a certain age may cause cultural alienation of other age groups, and thirdly, various problems such as shrinking creative paths due to the size of the cost required for idol group production and the lifespan of idol musicians' art activities. This paper derives the reality of the domestic idol bias phenomenon through comparative analysis of the English-American music market and the domestic music market, which have had a profound influence on the global music market in popular music history, and verified the theory and results through an expert survey using the Likert scale. In addition, the problems caused by the idol bias phenomenon were considered based on the theory of cultural diversity, and improvement directions were also suggested to solve this problem.

• Journal of Industrial Convergence
• /
• v.20 no.8
• /
• pp.1-13
• /
• 2022

Although the number of venture start-ups has increased significantly, it is difficult to judge the success or failure based on short-term performance alone. The survival of a company cannot be guaranteed if it does not show sustainable growth prospects. As a growth factor for venture companies, the level of technology commercialization capability and competitive strategies are considered important. Recently, the emergence of innovative business models is creating new opportunities and driving the growth of numerous venture start-ups. This study tried to investigate the mediating effect of business model innovation in the relationship between technology commercialization capability, competitive strategy and the growth prospects of venture companies. For this, empirical analysis was conducted using the original data of the Research on the Precision Status of Venture Firms 2021. As a result, production, manufacturing, marketing capability, cost leadership and product differentiation had a positive(+) effect on growth prospects. The mediating effect of business model innovation between all factors except for manufacturing capacity and growth prospects was verified. This study expanded the scope of research by shedding new light on the factors influencing the long-term growth prospects of venture companies and revealing business model innovation as a new mediating variable. In future research, it is necessary to develop an objective measurement tool and to identify differences according to industrial characteristics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.41-41
• /
• 2008

In general, polyimides (PIs) are used in alignment layers in liquid crystal displays (LCDs). The rubbing alignment technique has been widely used to align the LC molecules on the PI layer. Although this method is suitable for mass production of LCDs because of its simple process and high productivity, it has certain limitations. A rubbed PI surface includes debris left by the cloth, and the generation of electrostatic charges during the rubbing induces local defects, streaks, and a grating-like wavy surface due to nonuniform microgrooves that degrade the display resolution of computer displays and digital television. Additional washing and drying to remove the debris, and overwriting for multi-domain formation to improve the electro-optical characteristics such as the wide viewing angle, reduce the cost-effectiveness of the process. Therefore, an alternative to non-rubbing techniques without changing the LC alignment layer (i.e, PI) is proposed. The surface of LC alignment layers as a function of the ion beam (IE) energy was modified. Various pretilt angles were created on the IB-irradiated PI surfaces. After IB irradiation, the Ar ions did not change the morphology of the PI surface, indicating that the pretilt angle was not due to microgrooves. To verify the compositional behavior for the LC alignment, the chemical bonding states of the ill-irradiated PI surfaces were analyzed in detail by XPS. The chemical structure analysis showed that ability of LCs to align was due to the preferential orientation of the carbon network, which was caused by the breaking of C=O double bonds in the imide ring, parallel to the incident 18 direction. The potential of non-rubbing technology for fabricating display devices was further conformed by achieving the superior electro-optical characteristics, compared to rubbed PI.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.147-153
• /
• 2020

Developments in aircraft require safety verification through flight testing for many hours with prototype design and production. The test evaluation step of performing flight tests was an important process that determines the success in the development of the system. In particular, safety development through flight tests in the armed flight test is important for the development of attack helicopters. In the development of attack helicopters, the evaluation period and cost related to the armed flight test are closely related to the required ammunition requirement. Therefore, this paper presents the amount of ammunition required for the military flight test between attack helicopter developments through an analysis of the AH-1 helicopter in a similar case and ADS-44-HDBK of military specification. The AH-1 can be used to calculate the ammunition demand by considering the exclusion of redundant firing tests and configuration differences. In the case of the machine gun-equipped configuration, approximately 10,500R was required, and approximately 324R was required in the case of a rocket-mounted configuration. In addition, if the armed integrated bench is used properly, it is expected to promote efficiently the flight test in the armed flight by identifying the possible risk factors with armed flight tests and excluding them.

• Economic and Environmental Geology
• /
• v.43 no.2
• /
• pp.177-184
• /
• 2010

When cement grout is used for waterproofing of grounds, important roles are played by fluidity, particle size and bleeding. The most important element which determines their characteristics is the water/cement ratio of grout. Moreover in order to improve the efficiency of soil permeation, micro cement with a smaller average diameter is used in addition to ordinary portland cement. Besides the mixing ratio and cement diameter, the condition of ground is also of fundamental importance in the efficiency of permeation. In order to evaluate grout in terms of permeation ability into ground, we need a field test of grounting, which is cost and time consuming. In this paper we present a laboratory test method in which the suitability and efficiency of grouts are simply and more practically tested. In Korea neither a test standard nor devices are available to simulate grouting in a laboratory. We devised a grout injection equipment in which grouting was reproduced in the same condition with different materials, and suggested a standard for the production of specimens. Our tests revealed that the efficiency of injection increases with the water/cement ratio. We also found that more efficiently injected is the grout with the order of decreasing size; MS8000, micro cement, and ultra fine cements, and colloidal super cement.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.459-467
• /
• 2014

The importance of fusion and association using established spatial information has increased gradually with the production and supply of various spatial data by public institutions. The generation of necessary spatial information without field investigation and additional surveying can reduce time, labor, and financial costs. However, the study of the integration of the newly introduced road name address map with the digital map is very insufficient. Even though the use of the road name address map is encouraged for public works related to spatial information, the digital map is still widely used because it is the national basic map. Therefore, in this study, building matching and update were performed to associate the digital map with the road name address map. After geometric calibration using the block-based ICP (Iterative Closest Point) method, multi-scale corresponding pair searching with hierarchical clustering was applied to detect the multi-type match. The accuracy assessment showed that the proposed method is more than 95% accurate and the matched building layer of the two maps is useful for the integrated application and fusion. In addition, the use of the road name address map, which carries the latest and most frequently renewed data, enables cost-effective updating of new buildings.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.1 no.1
• /
• pp.59-64
• /
• 2003

Objective: This study was conducted for the nationwide statistical survey of poison exposure to provide the rationale for establishing and developing the poison control center (PCC) in Korea. Design: Study group for Korea PCC in National Medical Center reviewed the medical literature on poison exposure of Korea from death reports of National Statistical Office (NSO), the toxic exposure statistics from the report of National Health Insurance Corporation (NHIC), and poison related data from 119 ambulance services (FD) for the purpose of obtaining the poison and its related data. We also conducted questionnaire from the expert who work in emergency medicine department at the designated 320 emergency medical centers in Korea for the preparedness and acknowledgement about necessity of PCC and their need for that. Results: We reviewed the reliable data from the death report of NSO, poison exposure data from NHIC, and running report from FD. Poisoning death occured at home ($36.7\%$) and hospital ($46.3\%$). Poisoning are more common in rural area than the city area. Patients were seen more frequently in the local clinics than in any hospital. The drugs ($45.7\%$) and pesticide ($18.1\%$) are common poison. Common place to poison exposure were residential area ($39.9\%$), industry ($9\%$). mass residential area ($7\%$). and farm ($6\%$). The education level were primary school ($33.2\%$), high school ($23.7\%$), and middle schol ($21.3\%$) in order. We have to provide the poison guideline for lay public to understand easily, and for medical experts. The medical facilities need to be invested and have more interest for toxicology. All medical staff who work in the designated emergency medical center want PCC to establish. They want to have poison information from hospital ($91.3\%$), regional poison information center ($45.0\%$), regional poison control center ($52.5\%$), nationwide poison information center ($48.8\%$), nationwide poison control center ($46.25\%$), as a role of poison control center. They also want that pcc have poison epidemiologic study and statstics, training program for the experts, registration of rare case of posion on website, reflection of policies to activities for antidote production etc., speedy consultation system for poison analysis, public education, establishment of both regional and national pee, etc. Conclusion: Poison center must be established to provide poison information for all the public and medical experitise, focusing rural area and private clinic, to detoxify, to reduce the cost, time, morbity, and mortality through the whole country.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.9
• /
• pp.527-533
• /
• 2017

Environmental concern about smart phone is growing because it has short product life span while having intensive production technology and cost. In this study environmental impact of the smart phone is quantified using the LCA methodology based on the ISO 14040 series standards. The assessment considers potential environmental impacts across the whole life cycle of the smart phone including; pre-manufacturing; manufacturing; distribution; product use; and end-of-life stages. The pre-manufacturing stage is the most dominant life cycle stage causing the highest environmental impacts among all 10 impact categories assessed. The global warming impacts of the smart phone in the pre-manufacturing, distribution, use, manufacturing, and end-of-life stages were 52.6% 23.9%, 15.7%, 7.0%, and 0.8%, respectively. Sensitivity of the life cycle impact assessment results to the system boundary definition and assumptions made were quite high. Three components of the smart phone, PCB, battery, and display module were identified as the key components causing majority of the potential environmental impact in the pre-manufacturing stage. As such the slim and light-weight design and the use of environmental friendly materials are important design factors for reducing the environmental impact of the smart phone.

• Microbiology and Biotechnology Letters
• /
• v.40 no.2
• /
• pp.92-97
• /
• 2012

Antimicrobial peptides (AMPs) are important components of living organisms acting against Gram-negative and Gram-positive bacterial and fungal pathogens. Cathelicidin human peptides have a variety of biological activities that can be used in clinical applications. AMPs are not produced naturally in large quantities, and chemical synthesis is also economically impractical, especially for long peptides. Therefore, as an alternative, heterologous expression of AMPs by recombinant techniques has been studied as a means to reduce production costs. E. coli is an excellent host for the expression of AMPs, as well as other recombinant proteins, because of the low cost involved and its easy manipulation. However, overexpression of AMPs in E. coli has been shown to cause difficulties resulting from the toxicity of the subsequently produced AMPs. Therefore, fusion expression was theorized to be a solution to this problem. In this study, AMPs were expressed as fused proteins with the glutathione S-transferase (GST) binding protein to protect against the toxicity of AMPs when expressed in E. coli. The LL37, and hybrid gaegurin and LL37 (GGN4(1-16)-LL37(17-32), which we designated as GL32, peptides were expressed as GST-fusion proteins in E. coli and the fusion proteins were then purified by affinity columns. The purified peptides were obtained by removal of GST and were confirmed by western blot analysis. The purified antimicrobial peptides then demonstrated antimicrobial activities against Gram-negative and Gram-positive bacterial strains.