• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3032-3036
• /
• 2011

Cooling type of traction motor for EMU in domestic is mostly an open type. Its system is a cooling air entered through air inlet cool down a traction motor and an hot air by traction motor get out air outlet. It is easy to cool it down but hard to maintain it. To improve an ability of maintenance, a total enclosed type traction motor is already developed and used in abroad, not an opne type. So we developed a total enclosed type traction motor which will be used in domestic and abroad EMU. We tried to reduce a weight and a size compared with the abroad one. In contrast with open type traction motors which cool off inside of motors, total enclosed motors cool down by cooling exterior frame of motors. In this case, cooling fins or air fan blowing to the exterior of motors are applied. The total enclosed type traction motor developed by us have two housing to block the foreign substance into inner of a motor and have two cooling fan to easy to reduce a heat happened at a coil. In this paper, design of a cooling structure of the total enclosed traction motor developed twice and performance verification through test will be discussed.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.4
• /
• pp.53-57
• /
• 2007

In paper, We evaluated for various diode type ESD protection device using TLP measurement method. An Evaluation diode is divided to Enclosed type and Stripe type as pattern style in extensive. These diodes is split up followed factor that Anode-to-Cathod space, N+ region width, Multi type and Contact to Active space. After a TLP measurement, we can be got the Vt2, It2 by I-V characteristic values. In the results, diode of enclosed type is present relatively higher Current capability(It2) than stripe type in a same voltage conditions. And the Second-breakdown voltage(Vt2) were that Stripe type's diode higher than Enclosed type's diode as have $14{\sim}15V$. Finally we suggest the best diode design condition as ESD protection device using entire consequence.

• Steel and Composite Structures
• /
• v.47 no.4
• /
• pp.539-550
• /
• 2023

Owing to the obstruction of section steel on the moisture diffusion in concrete, the existing shrinkage prediction models overestimate the time-dependent deformation of steel reinforced concrete (SRC) columns, particularly for the SRC columns with enclosed section steels. To solve this issue, this study deals with analytical and experimental studies on the drying shrinkage for this type of column. First, an effective method for predicting the drying shrinkage of concrete based on finite element model is introduced and two crucial parameters for simulation of humidity field are determined. Then, the drying shrinkage of SRC columns with enclosed section steels is investigated and two modified parameters, which depend on the ambient relative humidity and the ratio of section steel size to column size, are introduced to the B3 model. Finally, an experiment on the shrinkage deformation of SRC columns with enclosed section steels is conducted. Comparing the predicted results with the experimental ones, it demonstrates that the modified B3 model is quite reasonable.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.11
• /
• pp.751-758
• /
• 2012

Recently, people are paying attention to new forms of construction. For example, deviated from an enclosed type space, people have been interested in an atrium type and an arcade type spaces. In this study, we had hypothesis 'Indoor thermal environment will be influenced by the inflow rate of natural lights with temperature and humidity.' We selected a multi-complex cultural center and conducted this study. This place is consisted of atrium, arcade, and enclosed types. The three spaces were classified according to the type of spaces that have own features along with their forms. The atrium type space has ceiling and the side windows, and the arcade type space has ceiling windows. On the other hand, there are no windows or open parts in the enclosed type space. Three measurement points at each space were selected because of their huge space. Intensity of illumination, temperature and humidity were confirmed by the average value of three measurement points. In addition, surveys were conducted regarding indoor comfort elements in each space.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.59-62
• /
• 2004

We investigated the effect of Xe content variation on the luminous efficiency of two different sub-pixel types, i.e., segmented electrode in delta color arrayed enclosed sub-pixel (SDE) and conventional stripe barrier type, in an ac plasma display panel through three-dimensional numerical simulations. The conventional cell type was found to have higher VUV generation efficiency as compared with that of SDE structure, but as the Xe content increased, the SDE type showed higher improvements in efficiency due to the lower plasma loss to the barrier walls.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.382-386
• /
• 2009

This paper describes design and analysis techniques of cold forging process for precise producing of T-200 type spider made of SCr420H by utilizing pneumatically operated enclosed die set. Since deducing feasible closing force is an important factor to optimize entire pneumatically operated cold forging system, a series of FE analyses with varying the number of gas cylinders has been carried out to investigate the influence of closing force upon the direction of applied load at die surfaces. It also reveals the optimum distribution of the gas cylinders in terms of the flatness of upper/lower plates.

• Journal of the Korean housing association
• /
• v.17 no.1
• /
• pp.29-36
• /
• 2006

Welwyn Garden City benefits from the greater design cohesion and management of development which gave it a more distinctive 'brand image' almost from the outset than its older garden city(Letchworth, Hampstead). Its planner, Louis de Soissons, brought a more obvious sense of traditional formal urbanism to the design of the second garden city. This was rather different to the distinctive but rather more informal arts and crafts approach of Raymond Unwin. Here it attempts to analyze how they greatly and firmly established the concept of Housing Group in the residential design, and what similar elements between Unwin and de Soissons in the New Town planning. It is pointed out that the Housing Group theory is composed of recognizing urban life as totality, and group planning theory, and that they definitely originated a new technique in the residential area. It is analyzed that the syntactic relations between the group planning theory and enclosed housing cluster designs in the English garden city are epitomized in Welwyn Garden City.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.141-143
• /
• 2008

Due to the demand for high-output motors in the limited space between the wheels in an electric train, self-ventilating traction motors have been used for many years. periodical disassembly maintenance is necessary to remove the small quantities of dust that enter the motor from the open-air ventilation. Reducing this burden, as well as increasing efficiency and reducing noise, would benefit the next generation of moters To address these needs, KRRI is developing a fully enclosed type traction motor, a fully enclosed type traction motor with outer fans, a high-efficiency permanent-magnet synchronous motor and a direct-drive motor(DDM) as traction motors for the next generation of trains.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.5
• /
• pp.644-650
• /
• 2018

According to a miniaturization and integration of electric device, a little size of fuse satisfying the current carrying capacity as well as an explosive tolerance and current interrupt rating are required. Fe-Ni alloy is applied to decrease an oxidation of fuse elements. A resistance and T.C.R(temperature coefficient of resistance) of a fuse are analyzed by changing a content of Ni And full rated current I-T curve from 1A to 6.3A has been tested. In order to an explosive energy, a straight wire type is selected to reduce a fuse melting time. An interrupt rating test was conducted by changing a content of Ni and the optimal content of Ni is to be 40%.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.1
• /
• pp.109-119
• /
• 2018

The purpose of this study is to analyze the geographical location information data and the damage trends according to the type of landform for the study of various cultural properties in 44 traditional places with national designated cultural properties damaged by the racing earthquake on September 12, 2016. The landform type was the most enclosed type, and the location type was more frequent in the surrounding area, such as urban and rural areas. The waterside type was located along rivers, rivers, valleys, lakes, and oceans except for the top of the mountain, but this area was found to be vulnerable to earthquakes, It is understood that it should be referred from cultural property management the side. 26 of the total 44 were temples. The elevation and slope increased with increasing of the flat type, the background type, the enclosed type, the mountain type, and the top type. Most often located on 1-20 % slopes, with the slope facing south more often than not. Within the 10 km range from the epicenter, 23% were concentrated, within the range of nearly 65 km, the background type was closest, and was concentrated in the northeast and southwest from the epicenter. In this study, it is meaningful to analyze earthquake damage in various aspects from the viewpoint of traditional space which is a landscaping cultural property and it will be used for planning, designing and managing traditional spaces.