• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.8
• /
• pp.911-918
• /
• 2010

With limitation of frequency bandwidth, the range accuracy of typical radars is limited. In this paper, for short distance measurements, the use of an AM(Amplitude Modulated) radar which provides improved range accuracy is proposed. The AM radar signal consists of a carrier frequency signal and double-sideband components. The fabricated AM radar operates with +10 dBm output power and 35 dB receiver gain at 24.128 GHz center frequency with 20 MHz bandwidth, and the range accuracy is measured as ${\pm}15\;cm$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.182-190
• /
• 2011

A amplitude modulation(AM) range measuring system utilizes the phase difference of the modulated envelope of the reflected signal to measure the distance. It is known that the AM system has a problem in accuracy due to antenna leakage signals and spurious reflection signals, but an AM range measurement system using an active reflector, which shifts the frequency bands, has been proposed in order to minimize the measurement errors due to spurious signals. In this paper, a new phase measurement module for the AM range measurement system, which enables to measure long distance with good accuracy, is proposed. The modulation frequency is alternatively selected between 8 and 1 MHz, and the measured distance range with this module is up to 150 m within 2 cm accuracy. A JK flip-flop circuit is used for higher phase accuracy, and an XOR circuit is used to cover long distance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.7
• /
• pp.620-624
• /
• 2016

In this paper we designed a current mode logic frequency divider to transmit a baseband amplitude modulated signal. From simulation result, we studied input and output waveforms according to the variation of input bias voltage. For the purpose of the verification of the study, we designed a current mode logic frequency divider at 1,400 MHz. The designed frequency divider operates between 100 MHz and 3,000 MHz, for -33 dBm input power. The circuit draws $I_{total}=30mA$ from $V_{DD}=3V$ supply, and the simulation result shows that an amplitude modulated signal at 1,400 MHz with the modulation index of 0.5 was successfully downconverted to 700 MHz.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1210-1212
• /
• 1994

An amplitude modulation technique for increasing the laser penetration efficiency for metals has been studied. By chopping electro-optically Nd:YAG laser pulse, the threshold energy for reliable hole drilling was decreased significantly and the penetration depth was increased. It was observed that the effect of chopping was optimal at 8-12 kHz with 60% duty cycle. It is believed that this improvement is due to an increase in the vapor recoil pressure and reduced plasma screening.

• Speech Sciences
• /
• v.12 no.4
• /
• pp.17-29
• /
• 2005

Time-frequency representation reveals some useful information about instantaneous frequency, instantaneous bandwidth and boundary of each AM-FM component of a speech signal. In many cases, the instantaneous frequency of each component is not constant. The variability of instantaneous frequency causes degradation of resolution in time-frequency representation. This paper presents a method of adaptively adjusting the transform kernel for preventing degradation of resolution due to time-varying instantaneous frequency. The transform kernel is the form of frequency modulated function. The modulation function in the transform kernel is determined by the estimate of instantaneous frequency which is approximated by first order polynomial at each time instance. Also, the window function is modulated by the estimated instantaneous. frequency for mitigation of fringing. effect. In the proposed method, not only the transform kernel but also the shape and the length of. the window function are adaptively adjusted by the instantaneous frequency of a speech signal.

• Speech Sciences
• /
• v.8 no.4
• /
• pp.45-58
• /
• 2001

Modulated components of a speech signal are frequently used for speech coding, speech recognition, and speech synthesis. Time-frequency representation (TFR) reveals some information about instantaneous frequency, instantaneous bandwidth and boundary of each component of the considering speech signal. In many cases, the extraction of AM-FM components corresponding to instantaneous frequencies is difficult since the Fourier spectra of the components with time-varying instantaneous frequency are overlapped each other in Fourier frequency domain. In this paper, an efficient method decomposing speech signal into AM-FM components is proposed. A variable bandwidth filter is developed for the decomposition of speech signals with time-varying instantaneous frequencies. The variable bandwidth filter can extract AM-FM components of a speech signal whose TFRs are not overlapped in timefrequency domain. Also, amplitude and instantaneous frequency of the decomposed components are estimated by using Hilbert transform.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.6 no.4
• /
• pp.20-30
• /
• 1969

Several new modulators using Voltage Variable Capacitance Diode are discribed. It was investigated that amplitude modulation which does not need modulation power is obtained by mdulation VVC diode as a tuning element of the quartz oscillator circuit. It offers a good AM system for carryphones in the citizen bands. While frequency modulated quartz oscillators coupled with a quarter wave network were tested as a wide band frequency modulator, Hartley type transistor oscillator offers the most stable and reproducibel FM quartz oscillator.