• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.448-455
• /
• 2005

In this paper, an analytical model for estimation of the time at which the concrete surface begins to dry is introduced to predict whether or not plastic shrinkage cracks occur. First of all, the validity of a consolidation model for bleeding of cement paste proposed by Tan et al. is verified by comparing the analytical results with the experimental results, and used to evaluate the rate and amount of bleed water of concrete. Also an analytical model for evaporation of bleed water which considers the effect of the temperature variation of concrete surface due to hydration heat on the evaporation rate is proposed, and the experimental and analytical results are then compared to verify the validity of the introduced model. In advance, the time at which the concrete surface begins to dry is estimated using above two analytical models, and compared with the experimental results about the time at which plastic shrinkage cracks occur. From the comparison, it is verified that the proposed model can predict the occurrence of plastic shrinkage cracking with comparative precision.

• Ecology and Resilient Infrastructure
• /
• 제4권4호
• /
• pp.187-192
• /
• 2017

본 연구는 보도, 차도, 주차장, 공원, 광장 등에서 많이 사용되고 있는 포장 재료인 블록의 증발 등 열적 성능을 평가하였다. 일반적으로 많이 사용되고 있는 일반블록과 LID (Low Impact Development)형 제품인 투수블록과 보수블록을 비교하였으며, 통제된 기후조건 (일사, 강우, 강설, 온도, 습도 등)이 갖춰진 챔버 (chamber) 내에서 실험을 수행하였다. 환경챔버 내의 공기온도와 상대습도가 제어되는 상태에서 강우설비와 로드셀을 활용하여 강우전과 후의 중량변화 및 일사장치와 송풍장치를 이용하여 증발량을 계측하였다. 결과적으로 보수블록이 일반블록에 비해 증발산량은 약 2.6배 많았으며, 표면온도는 $10^{\circ}C$, 공기온도는 $4.6^{\circ}C$ 낮았다. 따라서 블록시험에 강도, 투수성능뿐만이 아닌 열에 대한 부문도 추가하여 분석한다면, 도시의 열 환경개선에도 많은 도움이 될 수 있을 것이다.

• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2011년도 학술발표회
• /
• pp.7-10
• /
• 2011

The semi-arid and arid regions comprise almost 40 percent of the world's land surface. The low and erratic precipitation pattern is the single most significant contributor for limiting crop production in such regions where rainfall is the source for surface, soil and ground water. In a changing climate, the semi-arid and arid regions would increasingly face the challenge of water scarcity. According to the relevant literature; under the assumption of a doubling of the current atmospheric CO2 concentration, irrigation demand was estimated to increase for wheat and to decrease for second crop maize in a Mediterranean environment of Turkey in the 2070s. Crop evapotranspiration would decrease due to stomata closure. Reference evapotranspiration and potential soil evaporation were projected to increase by 8.0 and 7.3%, respectively, whereas actual soil evaporation was predicted to decrease by 16.5%. Drainage losses below 90 cm soil depth were found to decrease mainly due to lesser rainfall amount in the future.

• 한국농공학회지
• /
• 제23권2호
• /
• pp.35-44
• /
• 1981

This experiment was conducted to find out the consumptive use of irrigated water for calculation of duty water in paddy rice. Tall statured Japonica rice varieties, Nongbaek (early), Jinheung (medium) and Akibare (late), and short statured Tongil typed varieties, Josaeng Tongil(early), Suweon 264 (medium) and Suweon 258(late) were planted on the experimental farm of Kon-Kuk University in 1979. The results obtained in this study were as follows: 1. During the experimental period, the daily mean temperature was almost similar, the relative humidity was higher as much as 2.8%, the amount of rain fall was 100mm less and the pan evaporation was 70mm less compared with those of 30 years average, respectively. 2. The paddy soil was silty loam, which was suitable for the rice cultivation. 3. Varietal differences were find out for plant height, culm length, number of tillers, number of panicles, heading date, matured grain ratio, 1000-grain weight and rough rice yield. This difference might he the cause of varietal difference of the consumptive use of irrigated water during the rice growing period. 4. The evapotranspiration was gradually increased after transplanting and showed the peak from booting to heading stage of rice varieties. The average evapotranspiration through the whole growing period was 5.67-5. 80mm/day for tall statured Japonica varieties, and 5.99-6. 39mm/day for short statured Tongil typed varieties. 5. The ratio of evapotranspiration to pan-evaporation through the whole growing period was 1.49-1.50 for Japonica varieties, and 1.60-1.66 for Tongil typed varies. 6. Average amount of percolation in paddy field was 3. 62mm/day through the whole growing period of rice plant. 7. K-value in Blaney & Criddle formula was 0.94-0.98 for Japonica varieties and 1.02-1.08 for Tongil typed varieties, and coefficient consumptive water use (Kc-value) was 0.95-1.02 for Japonica varieties and 1.04-1.12 for Tongil typed varieties in this study. The modified coefficient for consumptive water use, which was calculated from data collected through the country including this study, was as follows;

• 펄프종이기술
• /
• 제45권6호
• /
• pp.78-87
• /
• 2013

Even though the notice No. 2010-11 of the Ministry of Food and Drug Safety Administration that has been applied to analyze the content of the water soluble residue eluted from multi-layer paperboard was abolished in 2011, its application for the analysis on evaporation residue is still valid. There are very high possibilities that the noticed existing method gives the misleading result on the evaporation residue due to the water soluble starch eluted from the multi-layer paperboard. The quantitative analysis on water-soluble residue with starch content correction has been carried in the study using UV/Vis spectroscopy and HPLC. The UV/Vis spectroscopy absorbance analysis showed the large amount of the oxidized starch obtained from the aqueous residue eluted out of the multi-layer paperboard after the iodine, ${\alpha}$-amylase reaction, and starch hydrolysis. The residual content decreased by the correction through the enzyme hydrolysis.

• Advances in Energy Research
• /
• 제4권2호
• /
• pp.147-161
• /
• 2016

To start with, finding a sustainable method to produce sweet water and electricity by using renewable energies is one of the most important issues at this time. So, experimental and theoretical analysis of the performance of a closed solar powered still, which is jointed to photovoltaic cells and vacuum pump and equipped by nano plate, as the principle stage of zero discharge desalination process is investigated in this project. Major goal of this work is to reuse the concentrated brine of the Mobin petrochemical complex in order to produce potable, sweet water from effluent saline wastewater and generating electricity in the same time by using solar energy instead of discharging them to the environment. It is observed the increase in brackish water temperature increases the average daily production of solar desalination still considerably. Therefore, the nano plate and vacuum pump are added to augment the evaporation rate. The insolation rate, evaporation rate, the average brackish temperature, ambient temperature, density are investigated during a year 2013. In addition to obtain the capacity of solar powered still, the highest and lowest amount of water and electricity generation are reported during a twelvemonth (2013). Results indicate the average daily production is increased 16%, which represents 7.78 kW.h energy saving comparing with traditional solar still.

• 생물환경조절학회지
• /
• 제11권2호
• /
• pp.93-100
• /
• 2002

본 연구에서는 포그냉방시스템을 수치적으로 시뮬레이션하기 위한 CFD 모델을 개발하였으며, 포그냉방온실에서 측정된 데이터에 의해 개발된 모델의 유효성을 검증하였다. 또한 분무수온, 분무수량, 분무정지시간과 분무입자의 증발률이 포그냉방시스템의 성능에 미치는 영향을 알아보기 위해 개발된 모델을 적용하였다. 시뮬레이션 결과에 의하면, 각 측점에서 실측치와 예측치의 온도차가 무차광조건에서는 $0.1~1.4^{\circ}C$, 차광조건에서는 $0.2~2.3^{\circ}C$였으며, 상대습도차는 무차광조건에서는 0.3~6.0%, 차광조건에서는 0.7~10.6%였다. 예측치가 실측치와 비교적 잘 일치하는 것으로 나타나 개발된 모델이 포그냉방시스템의 냉방효과를 예측할수 있는 것으로 판단된다. 포그냉방시스템 성능은 분무수량, 분무정지시간과 분무입자의 증발률의 영향을 많이 받지만 분무수온의 영향은 받지 않는 것으로 나타났다.

• 상하수도학회지
• /
• 제18권1호
• /
• pp.66-72
• /
• 2004

In this study, quantity and quality of collected rainwater by sand, gravel, soil, lawn and concrete surface, as collection materials were investigated and Rainwater Collection Prediction Model was developed to predict the amount of collected rainwater. The quantity of collected rainwater in concrete surface, gravel, sand, soil and lawn collection system was 1,067L(93.2%), 1,006L(87.8%), 902L(78.8%), 800L(69.9%), 788.5L(68.8%) for 8 months period, respectively. The average turbidity of collected rainwater in concrete surface, gravel, sand, soil and lawn collection system was 3.2NTU, 2.2NTU, 1.9NTU, 1.7NTU, 1.5NTU for 8 months period, respectively. For sand collection material, predicted amount by the Model and actual collected amount were 931.5L and 902L, which were very closed. For gravel collection material, predicted amount by Model and actual collected amount were 1,028.21. and 1,006L, which were very closed. To simulate the optimal rainwater storage volume, the rainfall and evaporation data in Dae-jeon city were used. For sand collection system with 30m2 area, the maximum storage volume was $17m^3$ and 62% of the year was secured for use of 240L/day.

• 상하수도학회지
• /
• 제10권4호
• /
• pp.73-84
• /
• 1996

Fluoride was first introduced into the drinking water of residents of Grand Rapids, Michigan in 1945 for the prevention of dental caries. Ever since, growing numbers of communities favor fluoridation. Now, over 7000 communities in the United States are adding F(0.7~1.2ppm) to their drinking water. The most effective to prevent tooth decay is putting lower concentrated fluoride(F, 0.7~1.2ppm) into drinking water. However, exact fluoride injection amount have not been decided, because the research of the fluoride injection effect was insufficient. Therefore, after separating fluoridation and non-fluoridation into public water supplies, we investigated concentration of fluoride, alkalinity, Al, Ca, Mg, evaporation residuals in APT, domestic, commercial area. Then, we decided allowable concentration of fluoride, injection point of fluoride in water supply system, cost effectiveness.

• 한국농공학회지
• /
• 제16권4호
• /
• pp.3555-3571
• /
• 1974

This experiment of which aim contribute to plan irrigation system so as to increase forage crop yields, was conducted to estimate evapotranspiration amount of forage crops and to find out system of consumed water in a pasture-ground. The results obtained by this study are as follows: 1. The general weather conditions which, were closely related to the evapotrannpiration of forage crops were nearly same as those of the average year with the exception that temperature of May and June were slightly low. 2. According to the investigation of potential evapotranspirations (P.E) or forage crops and its changes during growing periods, changes of tenday P.E. were high significant according to the harvesting period. P.E of Alfalfa of which yield was the largest was the biggest. Althrough the correlations between P.E. and meteorological factors were irregular oming to three-time harvesting, correlation between ten-day evapotraspiration amount and copper plated pan evaporation or solar radiation was high positive significant. 4. Predicting formulas of P.E. were led by weather factors, and also relatione between P.E. and weather factors were showed as figure. from the these formulas, P.E. may be calculated by weather factors. 5. Predicting formulas of P.E. were led by mean temperature and copper plated pan evaporation, and by mean temperature and solar radiation. As computed values and measured values showed in figure, these formulas were high signiflent. 6. In the total consumed soil water duration of 10 days which, was non-rain period from 12th to 21th of August, Alfalfa was the largest 48.1mm, second, Orchard grass 40.1mm and Fescue 37.6mm, and Ladino clover was the smallest 37.1mm, also, order of each forage crop yield amound. was same to the abov. Order of soil moisture extraction rate of soil layer of all the for forage crops dulation of ten-day was soil layer 1 which was largest, soil layer 2, 3, and 4 Reviewing the the first five-day and the second five day, in the first five-day, order of that of all the forage crops was same to the above, but in the second five-day, that of soil layer 2 or 3 was more than the of soil layer 1.