• 한국재료학회지
• /
• 제4권6호
• /
• pp.644-650
• /
• 1994

Electrohydrodynamic Atomization 급냉응고장치를 이용하여 고순도 실리콘 미세분말을 제조하여 투과전자현미경으로 미세조직과 그 응고상을 조사한 결과 직경이 60nm 이하인 분말에서 비장질상이 발견되었다. 비정질 실리콘의 원자구조를 분석하기 위하여 비정질 분말에서 얻은 전자회절 데이타를 이용하여 radial distribution function을 계산하여 해석한 결과, 실리콘의 결정구조인 다이아몬드 입방격자에서 발견되는 기본적 정사면체 배열이 비정질 실리콘의 2번째 근접원자간 거기까지 유지됨을 알 수 있었으며 이로부터 비정질 실리\ulcorner이 단범위 규칙성을 갖는 tetrahedrally coordinated random network 원자배열로 이루어짐을 알았다.

• 한국정보통신학회논문지
• /
• 제22권4호
• /
• pp.664-669
• /
• 2018

본 연구는 투명산화물반도체의 전기적인 특성과 산소공공과의 관계를 알아보기 위해서 $TiO_2$ 박막을 증착하여 MIM 구조를 만들어서 전압전류 특성을 관찰하였다. 산소공공은 XPS분석으로 이루어졌으며, 커패시턴스를 측정하여 전하의 용량이 많은 곳에서 산소공공이 어떤 영향을 주는가에 대하여도 조사하였다. 열처리를 통하여 결정질구조로 변하는 $TiO_2$ 박막은 산소공공이 가장 낮은 곳에서 커패시턴스 값이 가장 높았으며, 전하의 양이 많았다. 따라서 전하의 양이 많은 $TiO_2$박막이 $CO_2$ 가스에 대하여 가장 잘 민감하게 반응하는 것을 확인하였다.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.767-771
• /
• 1995

The atomic structure and magnetic properties of $LaCo_{13}$ amorphous alloy have been investigated and compared with those of its crystalline counterpart. It has been confirmed that the amorphous alloy is composed of the icosahedral clusters with a $NaZn_{13}$-type structure. The magnetic moment and the spin- wave stiffness constant obtained from the magnetic measurements in the amorphous state are larger than those in the crystalline state. The Curie temperature estimated from the reduced magnetization curve for the former is much higher than the value for the latter. The localized magnetic moment character in the amorphous state is stronger than that in the crystalline state.

• 열처리공학회지
• /
• 제12권4호
• /
• pp.320-326
• /
• 1999

In rapidly solidified $Al_{92-x}Nd_8$(Cu,Ag)x ($0{\leq}X{\leq}10at%$) alloys, amorphous single phases were obtained in the ranges of $Oat%{\leq}X{\leq}4at%$ for Al-Nd-Cu system and $Oat%{\leq}X{\leq}6at%$ for Al-Nd-Ag system, respectively. Mesoscopic structures consisted of amorphous and crystalline phases were formed above solute ranges. It was founded that the mesoscopic structures were also formed near 1st exothermic peak on DSC curve by aging in amorphous single phase alloys. For example, amorphous $Al_{92-x}Nd_8$(Cu,Ag)x (X=2.4at%) alloys containing nanoscale Al particles and compounds, i.e., mesoscopic structure, exhibited higher tensile fracture strength(${\sigma}_f$) than those of amorphous single phase alloys with the same composition. The ${\sigma}_f$ showed a maximum value in the $V_f$ ranges of 10~15%. The reason is presumed that the nanoscale precipitates which have higher mechanical strength compared with the amorphous phase with the same composition act as an effective resistance to shear deformation of the amorphous matrix.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.889-892
• /
• 2000

We have investigated the Pt doping effect on structural and electrochemical properties of amorphous vanadium oxide film, grown by radio frequency magnetron sputtering. Room temperature charge-discharge measurements based on a half-cell with a constant current clearly indicated that the Pt doping could improve the cyclibility of V$_2$O$_{5}$ cathode film. Using glancing angle x-ray diffraction (GXRD) and high resolution transmission electron microscopy (HRTEM) analysis, we found that the Pt doping with l0W r.f. power induce more random amorphous structure than undoped V$_2$O$_{5}$ film. As the r.f. power of Pt increases, large amount of Pt incorporates into amorphous V$_2$O$_{5}$ and makes PtOx microcrystalline phase in amorphous matrix. This result suggests that the semicondcuting PtOx microcrystalline phase in amorphous matrix lead to a drastically faded cyclibility of 50W Pt doped V$_2$O$_{5}$ cathode film. Possible explanations are given to describe the Pt doping effect on cyclibility of vanadium oxide cathode film.de film.

• 한국표면공학회지
• /
• 제20권4호
• /
• pp.154-162
• /
• 1987

The recent literatures on the amorphous plating are reviewed. The methods of the amorphous plating are classified into the electrodeposition and electroless deposition. The structure and properties of the amorphous deposits, and the prospect in the future on the amorphous plating are discussed.

• Journal of Welding and Joining
• /
• 제17권4호
• /
• pp.53-59
• /
• 1999

Amorphous alloys have also been called glassy alloys or non-crystalline alloys. They are made by the rapid solidification. The solidification occurs so rapid that the atoms are frozen in their liquid configuration. There are unique magnetic, mechanical, electrical and corrosive behaviors which result form their amorphous structure. In the study. amorphous coatings were manufactured with Ni-Cr-B-Si powders by flame spray. Measurement of hardness, were resistance, corrosion resistance and observation of microstructures and XRD, DSC were performed to investigate characteristics of amorphous coatings. The experimental results obtained as follow: 1) Amorphous powders could not be manufactured with the spraying in the spraying in the liquid nitrogen. But, amorphous coatings could be manufactured with the rotation cooling method by liquid nitrogen. In the fabrication of amorphous coatings, major factor was the rapid cooling by rotation of the substrate. 2) Hardness of coatings was obtained Hv 960 by formation of amorphous phase. But, wear resistance decreased. That was due to porosity in the coatings by the rapid cooling. 3) In the case of corrosion resistance, amorphous coatings were superior to air-cooled coatings. That was due to formation of amorphous phase. 4) After amorphous coatings were heat-treated at 520℃ for 1hr. hardness increased 80% and wear resistance increased 30% comparing with air cooled coatings. These were due to crystallization of amorphous phase and decrease of porosity by heat-treatment.

• 한국분말재료학회지
• /
• 제10권4호
• /
• pp.288-293
• /
• 2003

Mechanical alloying (MA) by high energy ball mill of Pure chromium Powders was carried out under the nitrogen gas atmosphere. Cr-N amorphous alloy powders have been produced through the solid-gas reaction subjected to MA. The atomic structure during amorphization process was observed by X-ray and neutron diffractions. An advantage of the neutron diffraction technique allows us to observe the local atomic structure surrounding a nitrogen atom. The coordination number of metal atoms around a N atom turns out to be 5.5 atoms. This implies that a nitrogen atom is located at both of centers of the tetrahedron and octahedron formed by metal atoms to stabilize an amorphous Cr-N structure. Also, we have revealed that a Cr-N amorphous alloy may produced from a mixture of pure Cr and Cr nitrides powders by solid-solid reaction during mechanical alloying.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.164-164
• /
• 2010

The impurity doped ZnO has been extensively studied because of its optoelectric properties. GIZO (Ga-In-Zn-O) amorphous oxide semiconductors has been widely used as transparent flexible semiconductor material. Recently, various amorphous transparent semiconductors such as IZO (In-Zn-O), GIZO, and HIZO (Hf-In-Zn-O) were developed. In this work, we examined the local structures of IZO, GIZO, and HIZO. The local coordination structure was investigated by the extended X-ray absorption fine structure. The IZO, GIZO and HIZO thin films ware deposited on the glass substrate with thickness of 400nm by the radio frequency sputtering method. The targets were prepared by the mixture of $In_2O_3$, ZnO and $HfO_2$ powders. The percent ratio of In:Zn in IZO, Ga:In:Zn in GIZO and Hf:In:Zn in HIZO was 45:55, 33:33:33 and 10:35:55, respectively. In this work, we found that IZO, GIZO and HIZO are all amorphous and have a similar local structure. Also, we obtained the bond distances of $d_{Ga-O}=1.85\;{\AA}$, $d_{Zn-O}=1.98\;{\AA}$, $d_{Hf-O}=2.08\;{\AA}$, $d_{In-O}=2.13\;{\AA}$.

• 반도체디스플레이기술학회지
• /
• 제14권4호
• /
• pp.20-24
• /
• 2015

This study was explained the correlation between the O 1s spectra and the crystallization of ITO thin films. The crystal structure of ITO thin films changed with various annealing temperatures and annealing methods such as atmosphere or vaccum conditions. The amorphous structure observed from XRD pattern showed the O 1s spectra with 531.2 eV, and the crystal structure of annealed ITO films analyzed by XRD pattern had the O 1s spectra of 529.8 eV as lower binding energy then the 531.2 eV. Oxygen in view of ITO films was related to the crystallization, and the ITO films annealed in an atmosphere pressure showed higher crystal structure than the ITO annealed in a vaccum. It was indicated that the amorphous structure had higher binding energy than the crystal structure analyzed by O 1s spectra of ITO films.