• Industry Promotion Research
• /
• v.7 no.4
• /
• pp.1-8
• /
• 2022

There are many one-shot devices that are used once and thrown away. One-shot devices such as firecrackers and ammunition are typical, and they are stored for a while after manufacture and then disposed of after use when necessary. However, unlike general operating systems, these one-shot devices have not been properly evaluated. This study first examines what the government does to secure reliability in the case of ammunition through ammunition stockpile reliability program. Next, in terms of statistical analysis, we show what the reliability analysis methods are for one-shot devices such as ammunition. Specifically, we show that it is possible to know the level of reliability if sampling inspection plan such as KS Q 0001 which is acceptance sampling plan by attributes is used. Next, non-parametric and parametric methods are introduced as ways to determine the storage reliability of ammunition. Among non-parametric methods, Kaplan-Meier method can be used since it can also handle censored data. Among parametric methods, Weibull distribution can be used to determine the storage reliability of ammunition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.64-72
• /
• 2020

DELAY M9 is an ammunition used in combination with the fuse M904 and M905 of aviation drop-off ammunitions. Due to the properties of the ammunition, the performance or safety of the ammunition cannot be verified until it is used, because of its one-time function, no reproduction and is finally destroyed at the same time. Long-term storage of ammunition in use by the army is inevitable due to its operational characteristics, and a test evaluation is required to maintain and verify the performance of stored ammunition for immediate use in case of emergency. This paper estimates the reliability and shelf life of the DELAY M9 ammunition by using the test data obtained through ASRP performed from the past to the present. The result of the performance evaluation test for the currently stored DELAY M9 ammunition is analyzed, and the reliability and shelf-life of the stored ammunition are assessed by examining the number of defects according to the storage time and production year. This research result can be used to manage the stored ammunition, such as ASRP planning and evaluation test, result analysis and munition state decision.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.4
• /
• pp.331-339
• /
• 2019

Recently, expansion of urban and social infrastructures is planned to go through the transfer of military facilities or crossing the infrastructures via underground tunnels. However, when crossing facilities such as ammunition and explosive storages, a high level of safety assessment is required to prevent an accidental explosion of ground ammunition. In this study, a case study was conducted to evaluate the effect of blasting for the construction of tunnel on the ground ammunition facilities. The design section of Sinansan train operated by the Korea Railroad Authority with agreement of the Ministry of National Defense was selected. For the purpose of this study, the vibration velocity due to explosion was predicted by using GTS-NX, a numerical analysis program. Through literature review, it was confirmed that the vibration velocity of 0.2cm/sec can be a safety evaluation standard. These safety evaluation indicators and procedures used in this study can be utilized as an index of safety evaluation in the planning of social infrastructures that cross the ammunition facilities in the future.

• Journal of Internet Computing and Services
• /
• v.23 no.1
• /
• pp.135-145
• /
• 2022

This paper presented a method to build a predictable smart ammunition logistics system using the 4th industrial technology for ammunition logistics, which is the core functions in the field of defense and logistics. We have analyzed the current level of ammunition logistics with various perspectives such as domestic and overseas logistics policies, technology trends, ammunition logistics characteristics, the smart logistics certification measures by Ministry of Land, Infrastructure and Transport. As a result it is considered that the current ammunition logistics needs needs improvement. To improve this, we presented a direction based on the implications derived after analyzing various ongoing programs such as wired/wireless-based automation, smart ammunition depots, and logistics innovation of the army, navy, and air force that can be applied to the ammunition logistics. In order to implement a data-based smart ammunition logistics management system that can achieve innovation and efficiency of total life cycle while meeting changes in the battlefield environment, we presented 4 objectives such as "automation and modernization of field work", "3D-based storage management & improvement of issuing at war," and "data management for prediction-oriented ammunition management". it is expected that there will be benefits such as improvement of operational continuity, guarantee of ammunition reliability, budget reduction, improvement of inefficiencies such as delay, waiting, and double work, and reduction of accidents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.700-707
• /
• 2016

Recently, ammunition malfunctions of the 40mm grenade were reported during live fire training. When 72 40mm grenades were fired by the army, 11 duds were encountered. The dud ammunition rate was approximately 15%. Because ammunition is used a long time after its manufacture, it is necessary to ensure its performance after long-term storage. In this study, we attempted to decrease the dud ammunition rate of 40mm grenade (K200) fuzes through quality improvement. First, it was determined by the detonator performance test that abnormal explosions occurred due to the degradation of the detonator as a result of its aging characteristics. Second, we improved the fuze quality of the 40mm grenade. Third, we tested its shelf life to estimate its life expectancy. The shelf life of the 40mm grenade fuze obtained using the Arrhenius equation was 6.5 years for the existing grenade fuze and 45.5 years for the improved grenade fuze. This showed that the shelf life of the improved grenade was increased approximately 7 times. Therefore, the improved 40mm grenade fuze contributes to the quality improvement of the 40mm grenade by decreasing the dud ammunition rate during long term storage.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.4
• /
• pp.509-516
• /
• 2019

It is well known that nitroglycerin(NG) may evaporate and migrate from the triple base propellant grains in storage. This physical process makes it double base environment to the CCC(combustible cartridge case) which is based on nitrocellulose(NC) without NG. Meanwhile, it is not appropriate to use diphenylamine(DPA) as a stabilizer for CCC in this double base environment because of incompatibility between DPA and NG. So we estimated the shelf life to study the effect of NG migration from propellant to CCC by following the procedures in the STANAG 4257. And we found out that CCC with ethylcentralite(ECL) has 7.5 years longer shelf life than with DPA, when NG migrates to CCC from triple base propellant grains.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.1
• /
• pp.99-106
• /
• 2021

This study explores the improvement of storage environment of igloo-shaped magazine using forced ventilation. Conjugate heat transfer analysis of forced convection and conduction are performed to calculate the flow, temperature, and relative humidity field in igloo-shaped magazine. Through the conjugate heat transfer analysis, the effects of inlet vent, volume flow rates of jet, and jet angles on the condensation and relative humidity are numerically investigated. The area of condensation in igloo-shaped magazine and relative humidity at the surface of ammunitions are then calculated.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.1
• /
• pp.1-10
• /
• 2015

Objective: The purpose of this paper is to evaluate old and newly designed ammunition boxes from an ergonomic point of view. Background: The ammunition boxes made of wood, which are currently used by the military, have some difficulties such as corrosion and damage of ammunition, environmental pollution, and stock management. Also, damages to the wooden ammunition boxes take place frequently, because soldiers carry them manually. Method: Sixteen participants volunteered to randomly perform lifting, carrying, and side-by-side moving tasks with 4 different old and new boxes, respectively for the ammunitions of 5.56mm, 60mm, 81mm, and 105mm in diameter. The old boxes are made of wood and are currently used in the military, while the new boxes are made of plastics. The joint moments of the elbow, shoulder, back, and knee were measured by using a motion analysis system and force platforms. In addition, an electromyographic system was used to measure the forces of hand and wrist muscles. Results: In most tasks, new boxes caused less joint moments at the elbow and shoulder than old boxes, because the new boxes were lighter and smaller than the old boxes. New boxes also derived less hand and wrist muscle forces due to the provision of fixed hard handles rather than string handles. Conclusion: The ergonomically designed new boxes could reduce the physical stresses of soldiers manually handling ammunitions and be helpful for storage and reuse. Application: This study shows an ergonomic application example for product development and evaluation.

• Journal of Applied Reliability
• /
• v.16 no.3
• /
• pp.208-215
• /
• 2016

Purpose: ASRP for the domestic development guided missiles requires not only for the reliability evaluation of the products in storage but also for the life cycle management of the products including development prototypes and initial production items. Methods: For this purpose, it should be performed to build a performance database before and after the accelerated aging test with shelf life items including development prototypes and initial production items, based on which the lifetime prediction should also be carried out. In addition, HILS must be applied for the acceptance test with the initial and follow-up production items, and also for ASRP for the long-term storage products in order to secure systematic quality assurance. Results: The results for the life cycle reliability Improving of domestic development of guided missiles are DB building of prescription Item performance, active application of HILS, Management associated with guided missiles life cycle and to Secure technology data about the introduction of foreign guided missiles. Conclusion: Furthermore, it is demanded that DTaQ, the managing agency of ASRP, actively take part in the process to maintain reliability engagement consistency over the life cycle of guided missiles.

• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.6
• /
• pp.107-113
• /
• 2023

In the field of ammunition, storage performance is recognized as important, and the moisture-proof performance of packaging containers is very important. In the ammunition field, paper cans with a multi-layered structure are mainly used as packaging containers. It is made by layering materials that play various roles. These packaging containers are mainly evaluated for moisture-proof performance according to the Korean Industrial Standard KS T 1314. The moisture permeability is determined through linear regression analysis of the change in weight of the moisture absorbent added inside. In this study, the effect of the amount of desiccant added on the moisture permeability test results of packaging containers was confirmed. It is considered appropriate that the amount of desiccant used in testing ammunition packaging containers be approximately 70% or more of the internal volume.