• Composites Research
• /
• v.30 no.3
• /
• pp.223-228
• /
• 2017

The article explains about development of flame retardant self-reinforced composites (FR-SRC) through compression molding technique by utilizing Polypropylene (PP), Ammonium polyphosphate (APP) and chitosan. The effect of APP and chitosan on mechanical, thermal and flame retardant properties in FR-SRC were studied. The mechanical strength of FR-SRC is enhanced than Pure SRC. However, the strength is decreased significantly with increasing the concentration of both flame retardant fillers. But comparison, chitosan filled FR-SRC is stronger than APP filled FR-SRC. In case of flame retardancy, APP is more effective than chitosan. These results can be applicable to provide light weight and recyclable flame retardant self-reinforced composites for automobile and packaging industries, etc.

• Journal of Korean Society on Water Environment
• /
• v.33 no.4
• /
• pp.387-393
• /
• 2017

A chemical batch tests were conducted to evaluate if microwave heating enhances phosphorous release from waste activated sludge (WAS) at pH 2.5, 5, 7, 9 and 11. Polyphosphate-accumulating organisms have a unique physiological feature, which releases intracellular polyphosphate granules when they are exposed under high temperature environments. Microwave irradiation was found to encourage large amount of phosphorus release from WAS, depending on pH and temperature conditions. Most of phosphorus was released below $59^{\circ}C$ within 30 min. A marked increase in phosphorus release was observed under alkaline or acidic conditions. However, based on control tests for phosphorus release under different pH conditions without microwave heating, the largest amount of phosphorus released by microwave irradiation was found at pH 7, followed by 5, 9, 11. On the other hand, crystallization was conducted to obtain magnesium ammonium phosphate (MAP) from phosphate released by microwave heating at pH 7. X-ray diffraction analysis confirmed that the recovered crystalline materials were MAP. MAP is an environmentally friendly fertilizer, which slowly releases ammonia and phosphorus in response to the demand of plant root. Thus, the recovered MAP as a phosphate fertilizer is fully expected to play a important role in the reduction of agricultural non-point pollution.

• Korean Journal of Environmental Agriculture
• /
• v.11 no.1
• /
• pp.67-76
• /
• 1992

A mechanistic study by which Cadmium-tolerant P.Putida C1 accumulates high conc of Cd in its cell body was performed. Approximately 57% Cd accumulated was distributed on the cell wall and the other 43% portion was in cytoplasm. 84% Cd of the Cd in the cell wall fractions present in the polyphosphate-polysaccharide fractions, but most of Cd in the cytoplasm fraction was in protein and nucleic acid. Cadmium affected the protein synthesis in P. Putida. The intracellular protein content was decreased by cadmium addition, but the soluble protein precipitated by ammonium sulfate($30{\sim}75%$ satruation) was increased as compared to that from the cells grwon without cadmium. Furthermore, in the cells grown with of cadmium, high-molecular-weight soluble protein was increased, with of cadmium, high-molecular-weight soluble protein was increased, compared with the cells grown without cadmium, but low-molecular-weight soluble protein was decreased. These results indicate that Cd inhibited the intracellular protein biosynthesis but enhance biosynthesis of the high-molecular-weight soluble protein precipitate by ammonium sulfate($30{\sim}75%$ saturation).

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.11a
• /
• pp.221-222
• /
• 2013

다양한 첨가제가 들어가는 고분자 화합물(compound)의 제조에 있어 난연 발포 보조제인 팽창흑연(Expandable Graphite, EGP)은 흡유가가 낮기 때문에 비교적 많은 양을 첨가해도 혼합(Mixing)이 잘 되는 것으로 알려져 있다. 본 논문에서는 대표적인 인계 난연제 APP(Ammonium Polyphosphate)를 사용한 난연 EPDM(Ethylene Propylene Diene Monomer) 폼에 팽창흑연 첨가량을 증가시키면서 산소 지수와 발열량을 통해 난연 성능의 변화를 분석하였다. 산소지수는 ISO 4589-2 상온 산소지수 방법을, 발열량 평가는 ISO 5660-1 콘 칼로리미터를 활용하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.11
• /
• pp.1205-1211
• /
• 2004

This study has investigated radiation degradation of chloroprene rubber in the presence of some fire retardant. Ammonium polyphosphate, aluminium trihydroxide, magnesium hydroxide, calcium carbonate and antimony trioxide were selected as flame retardant. Samples were irradiated using a Co$^{60}$ ${\gamma}$ -ray and ray up to 2000 kGy at a dose rate of 5 kGy/hr in the presence of air atmosphere at room temperature. After irradiation, samples were assessed fire retardancy with electrical properties and mechanical properties. Some considerations concerning the effects of the fire retardants added to chloroprene rubber on the radiation and thermal stability of chloroprene rubber are presented. From fire retardancy with electrical and mechanical property measurements, it was found that addition of magnesium hydroxide resulted in maximum fire retardant effect.

• Fire Science and Engineering
• /
• v.28 no.5
• /
• pp.58-63
• /
• 2014

Fire-resistance paints are supposed to become intumescent and diminish heat transfer along the steel frames in case of a fire. If unsatisfactory fire-resistance paints which do not satisfy their standard specification are used, it may result in a severe disaster. Because satisfactory fire-resistance paints are hardly discriminated from the unsatisfactory ones by a simple visual inspection, more reliable and convenient onsite evaluation methods are necessary. Here we report the preliminary study result on the fire safety testing method for fire-resistance paints using an X-ray analysis method. It was found that the existence and quantity of effective constituents in fire-resistance paints can be detected by the X-ray analysis method. X-ray fluorescence (XRF) analyses showed that P and Cl elements are much more enriched in fire-resistance paints, compared to normal paints. X-ray diffraction (XRD) analyses showed that ammonium polyphosphate is present as the main crystalline material in fire-resistance paints, but absent in normal paints. The X-ray analysis method is expected to be used for the onsite inspection of fire-resistance paints with the upcoming availability of portable XRF and XRD instruments.

• Applied Biological Chemistry
• /
• v.43 no.3
• /
• pp.163-168
• /
• 2000

To remove phosphate accumulated in the soil and water, Acinetobacter lwoffi PO8 possessing a high ability to accumulate phosphate was isolated from a active sludge. Bacterium was cultured in the liquid medium containing $150\;{\mu}g/mL$ of phosphate at $30^{\circ}C$ in different culture conditions to examine intracellular phosphate uptake. The initial pH in the range of $7.5{\sim}8.5$ was effective on the growth and phosphate uptake of the strain. Glycerol and arabinose used as a carbon sources showed 93 and 91% the phsphate uptake, respectively. Among the nitrogen sources, ammonium salt such as $NH_4NO_3$ and $(NH_4)_2SO_4$ was effectively utilized on the phosphate uptake compared with amino compounds. The rate of phosphate uptake of $NH_4NO_3$, and $(NH_4)_2SO_4$, was 95 and 96%, respectively The growth and Phosphate uptake ability in the strain were significantly promoted when metal ions were added in the medium; $Co^{2+}$, however, was not utilized by the strain. The capacity of phosphate uptake was enhanced to $10{\sim}20%$ when arginine, methionine, or lysine was added. Using $^{32}P$ to examine the uptake Pattern of intracellular phosphate, experiment result showed that polyphosphate was largely found in the fraction of intracellular inorganic phosphate of Acinetobacter lwoffi PO8.

• Textile Coloration and Finishing
• /
• v.20 no.2
• /
• pp.66-74
• /
• 2008

Effect of disperse dyeing on flame retardant finishing of PET fabrics via UV curing using three UV curable phosphorous-containing methacrylates and ammonium polyphosphate(APP) was investigated. The dye fixation and flame retardancy of PET fabrics did not change significantly with excellent durability to five laundering cycles irrespective of the dyeing and finishing sequence. However, the flame retardancy of Pekoflam-treated fabrics was lower than that of the UV treated and decreased substantially when heat treatment was carried out before the dyeing. The dyeability of the flame-retardant PET fabrics was not affected in the case of UV curing of the methacrylates alone. However, UV finishing after the dyeing caused significant decrease in K/S and ${\Delta}E$ due to changed refraction and inherent color of surface coating of the UV curable monomers and APP. Whereas the heat treatment with Pekoflam decreased both color fastness to laundering and sublimation, surprisingly the UV finish of PET fabrics before and after the dyeing increased the color fastness probably resulting from the presence of photopolymerized surface layer on the fabrics.

• Journal of the Korean Society of Safety
• /
• v.27 no.1
• /
• pp.26-31
• /
• 2012

Wood-plastic composites represents a growing class of materials used by the residential construction industry and furniture industry. In this study, the effect of flame retardants on the flammability and mechanical properties of wood flour-high density polyethylene(HDPE) composites were studied. we were manufactured wood flour-HDPE composites by modular intermeshing co-rotating twin screw extruder with L/D ratio of 42. The flame retardant properties were used limiting oxygen index(LOI) and mechanical properties were measured by universal testing machine(UTM). The Morphological analysis of composites were analyzed by Scanning electron microscope(SEM). It was found that Ammonium polyphosphate can effectively reduce the flammability of the wood flour-HDPE composites. Marginal reduction in the mechanical properties of the composites was found with addition of flame retardants. SEM images showed that the coupling agent improved wood flour-HDPE interfacial bonding.

• Elastomers and Composites
• /
• v.52 no.1
• /
• pp.27-34
• /
• 2017

In this experiment, blends of ethylene vinyl acetate rubber (EVM) with a vinyl acetate (VA) content greater than 40 wt% and ethylene propylene rubber (EPM) were prepared by mechanical mixing; a number of parameters of the blends, including oil resistance, morphological and dynamic mechanical properties and flame retardancy, were subsequently measured. In the $100^{\circ}C$ oil resistance test, both the ammonium polyphosphate/dipentaerythritol/expandable graphite (APP/DPER/EG) and aluminum hydroxide (ATH) flame retardant systems showed an increase in volume change with increasing EPM content. For the ATH system, the dispersion shape was coarse and aggregation was observed. The results of a dynamic mechanical test showed slightly higher E' and E'' for the APP/DPER/EG flame retardant system when compared to the single ATH system. For both the APP/DPER/EG and ATH systems, the limited oxygen index (LOI) tests performed at increasing content of EPM showed a LOI value higher than 30, indicating excellent flame resistance.