• Applied Biological Chemistry
• /
• v.48 no.2
• /
• pp.109-114
• /
• 2005

A bacterium capable of emulsifying hydrocarbon, n-hexadecane, and decreasing surface tension of the culture media using oil collapsing method was isolated. The bacterium was partially identified as Bacillus sp. and named BJS-51. n-Hexadecane was the most effective carbon source for production of biosurfactant. Surface tension was decreased from 76 dyne/cm to 31 dyne/cm and CMD (critical micelle dilution) had the highest value of 5.7 at 3% n-hexadecane. Ammonium phosphate was the most effective nitrogen source, when C/N ratio was 60, surface tension and CMD were 29 dyne/cm and 9.2, respectively. Optimum pH and temperature were 7.2 and $30^{\circ}C$, respectively. Produced biosurfactant was extracted and purified using organic solvent extraction method and preparative HPLC systems. After analysis by various color reaction, this biosurfactant was identified as lipopolysaccharide. Surface tension and CMC (critical micelle concentration) of purified biosurfactant were 27 dyne/cm and 0.08 g/l, repectively. CMD was 9.2, so the yield of biosurfactant was about 0.74 g/l at the optimal conditions. The biosurfactant was very stable at wide range of $pH\;2{\sim}12$ with surface tension $29{\sim}31\;dyne/cm$ and showed $29{\sim}30\;dyne/cm$ of surface tension after heat treatment at $100^{\circ}C$ for 60 min.

• KSBB Journal
• /
• v.11 no.3
• /
• pp.303-310
• /
• 1996

The marine microalga Isochrysis galbana Parke was studied to optimize its growth conditions in flask culture. Important medium components studied include nitrogen source, buffer, trace elements and vitamins. Environmental conditions include pH, temperature, light intensity, mixing extent and working volume. The medium prepared from natural sea-waters gave a higher final cell density than the medium prepared from synthetic sea-water Nitrate was a better source than ammonium. In the range of 0.4∼2mM, the final cell density was proportional to the initial nitrate concentration and the cell yield was estimated to be 8.5g dry cell wt/g N. For phosphate, optimal growth was observed in 0.1∼1.0mM but a considerable variation in pH was resulted. The addition of Tris at 5mM or 7mM could stabilize the medium pH, but this significantly reduced both growth rate and final cell density, The effect of trace elements and vitamins was negligible. Optimal temperature and initial pH were $20^{\circ}C$ and 8. When the intensity of incident light was varied in the range of 400∼2100 lux, the growth rate increased from 10mL to 70mL, the final cell density decreased although the initial growth rate did not change. Optimal agitation speed was 100rpm when working volume was 30mL. With optimal conditions, the maximum specific growth rate obtained was 0.021hr-1 and the final cell density was 1.1g/L.

• KSBB Journal
• /
• v.14 no.1
• /
• pp.114-118
• /
• 1999

In order to use a polysaccharide, curdlan, as a concrete admixture, we first developed a pilot-scale fermentation process for the mass production of curdlan. We also examined the rheological properties of curdlan, and tested how well the curdlan obtained in this work increased the segregational resistance of the cement slurry. Fermentation was performed in a 300-liter fermenter equipped with 3 disk-turbine impellers. Since curdlan production is stimulated under nitrogen-limiting conditions, the culture pH was shifted from the optimal pH for cell growth (pH 7.0) to the optimal pH for curdlan production (pH 5.5) at the onset of ammonium exhaustion. We obtained a curdlan production of 65 g/L in 120 hr batch cultivation of Agrobacterium species. The insoluble curdlan at the final stage of fermentation was readily harvested by centrifugation together with the cells. The freeze-dried sample contained 78% (w/w) of curdlan. The solubility and viscosity of the curdlan increased with the increase of the solution pH, which enhances the viscosity of concrete since the pH of concrete is extremely high (pH 13.0). Test results of the curdlan as a concrete admixture with cement slurry demonstrated that it prohibits the leakage of water. In conclusion, this work certifies and enlarges curdlan's industrial potential as a concrete admixture.

• Korean Journal of Environmental Biology
• /
• v.30 no.3
• /
• pp.219-230
• /
• 2012

We surveyed 23 sites of Jinhae Bay in spring and summer 2010 in order to study the correlation between the variation of environmental factors, including salinity, temperature, and nutrients and the characteristics of phytoplankton community structures in summer stratification. Phytoplankton biomass was high in the surface water in summer; however, it was very low in the bottom water. The results showed a negative correlation between chlorophyll a (chl. a) and nutrients (silicate, nitrate, nitrite, ammonium, and phosphate) or nutrients ratio in summer; however, there was mostly a positive correlation between chl. a and these nutrients in spring. This inconsistent correlation between spring and summer was attributed to the phytoplankton community, because a diverse phytoplankton community has different nutrient uptake abilities. In addition, the results of CCA (canonical correspondence analysis) showed a negative correlation between phosphate and dominant species, including Chaetoceros spp., Skeletonema costatum-like spp., and Pseudo-nitzschia delicatissima in summer, but a strong positive correlation between DIN (dissolved inorganic nitrogen) and the dominant species, including Cryptomonas spp. and Pseudo-nitzschia multistriata in spring. Consistently, the dominant algal species in summer showed a relatively smaller size cells compared with those in spring, suggested that it may have related with the low nutrient levels at surface layer due to strong stratified water column of summer.

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.609-614
• /
• 2015

This study was to investigate the production of combustion toxic gases of pinus rigida specimens treated with pyrophosphoric acid (PP)/4ammonuium ion ($4NH_4{^+}$), methylenepiperazinomethyl-bis-phosphonic acid (PIPEABP) and PIPEABP/$4NH_4{^+}$. Each pinus rigida plates was painted in three times with 15 wt% in the aqueous solution followed by drying the species at room temperature. Emission of combustion toxic gases was examined by the cone calorimeter (ISO 5660-1). First-time to peak mass loss rate (1st-$TMLR_{peak}$) treated with chemicals was delayed upto 66.7~250.0% compared to those of untreated specimens. For test pieces treated with the chemicals, the emission of peak carbon monoxide ($CO_{peak}$) values of 0.0136~0.0178% and peak carbon dioxide ($CO_{2\;peak}$) value of 0.04432~0.3648% were obtained, which were higher than those for the virgin plate. In particular, oxygen emission is much higher than the level of 15% which can be fatal to humans. Therefore, the resulting risk could be eliminated. However it is supposed that the combustion-toxicities were partially increased compared to those of virgin plate.

• Korean Journal of Ecology and Environment
• /
• v.43 no.3
• /
• pp.369-376
• /
• 2010

A novel or canal-type continuous removal of organic matter (C-CROM) with combined freshwater bivalves (Unio douglasiae and Anodonta woodiana) was developed to improve the water quality (IWQ) of eutrophic reservoirs. The first experiment was performed for 12 days to measure the IWQ using 256 individuals of combined bivalves (ca. 7:3), at the same density that distributed in the collection stream. The second experiment was conducted to evaluate the efficacy of IWQ with the addition of each 30% of two mussels for 14 days. Results indicated that a novel C-CROM significantly decreased suspended solids, chlorophyll-$\alpha$, transparency, total nitrogen and phosphorus, and increased ammonium and biodeposition (t-test, P<0.001 for all), while other dissolved inorganic nutrients such as $NO_2$, $NO_3$, and SRP did not change (t-test, P>0.5). Daily IWQ performances of C-CROM with combined mussels was about two times higher to the previous studies using single species where less suspended inorganic nutrients were released except for ammonia. Collectively, a C-CROM is more strategic to the water quality improvement of eutrophic lake.

• Korean Journal of Food Science and Technology
• /
• v.8 no.1
• /
• pp.33-41
• /
• 1976

These experiment were conducted to investigate the cultural condition of the lipase production by Rhizopus japonicus. The results obtained were as follows: 1. Soybean meal and ammonium sulfate were the most effective in the lipase production as organic and inorganic nitrogen sources, respectively. 2. The lipase production was strongly inhibited, when added as carbon sources xylose, glucose, fructose, galactose, maltose, soluble starch, and dextrin causing the lowering of pH of the medium during culture. Sucrose did not inhibit the lipase production, but not caused any effect when added. 3. $K_2HPO_4$ as phosphate salt and $MgSO_4{\cdot}7H_2O$ as magnesium salt were the most effective in the lipase production. 4. The addition of olive oil, soybean oil, and coconut oil respectively increased the enzyme production and especially 1% olive oil increased it by 50%. 5. The enzyme production increased slightly on the addition of yeast extract to $0.05{\sim}0.07%$. 6. The optimum composition of the medium for the lipase production by Rhizopus japonicus was in the composition of soybean meal 2%; $K_2HPO_4{\cdot}$ 0.5%; $(NH_4)_2SO_4$ 0.1%; $MgSO_4\;7H_2O$ 0.05%; yeast extract 0.05%; olive oil 1%. The maximum production of the lipase was attained by the incubation far 48hrs under the optimum incubation condition.

• Microbiology and Biotechnology Letters
• /
• v.7 no.3
• /
• pp.135-140
• /
• 1979

A Streptomyces sp. strain AS-727 which was capable of producing penicillinase, was isolated from soil. The enzyme production was affected by the carbon and nitrogen sources added. Among them so far tested, glucose (or maltose) and sodium nitrate increased the enzyme production. And the amount of enzyme prodced reached maximum in 4 days cultivation. The optimla pH and temperature of the penicillinase was between pH 6.0 to 8.0 and 4$0^{\circ}C$ respectively. The stabel pH range of the enzyme was stable at 4$0^{\circ}C$, but it lost about 30％ and 40％ of the the activity respectively when it was treated at 6$0^{\circ}C$ and 8$0^{\circ}C$ for 60 minutes. The activity of the enzyme was inhibited by Z $n^{++}$, but A $g^{+}$, $Co^{++}$, $_Mn^{++}$, $Ca^{++}$, P $b^{++}$ did not affected enzyme activity. Peculiarly, the enzyme protein precipitated by freezing or addition of ammonium sulfate, urea, sodium chloride and some organic solvents as etanol, methanol, acetone was not dissolved in deionized water or any buffer solution.n.n.ion.n.n.

• Microbiology and Biotechnology Letters
• /
• v.2 no.2
• /
• pp.79-82
• /
• 1974

Present experiments were designed to estimate the effects of pretreatments by various kinds of alkalis to the agricultural wastes such as cereal straws as the substrate on the production of cellulosic single-cell protein. Among the various kinds of alkalis NaOH was proved to be the most effective on improving the digestibility of cellulose by the bacteria isolated. NH$_4$OH which is inferior to NaOH in the effectiveness of treatment might have more economic advantage in the price, and the ammonium salt resulted from the neutralization can be used as the nitrogen source by bacteria. The treatment with higher concentration than 1 normality of NH$_4$OH didn't increase the productivility of cell mass. About five per cent of (NH$_4$)$_2$SO$_4$ in medium resulted from the neutralization didn't have any influence in the cell mass productivility. Futhermore, the cell mass productibility was higher in the case of neutralization than alkali free washing. The digestibility of straws was increased from 7.9％ to 46.0％ by NH$_4$OH treatment, and 6.3∼6.45g of dry cell were obtained from 40g of NH$_4$OH treated straws. In the case of NaOH treatment, 8.6g of cell mass was obtained from 40g of substrate.

• The Korean Journal of Mycology
• /
• v.15 no.1
• /
• pp.42-47
• /
• 1987

4 strains of the oak mushroom Lentinus edodes including the strain ASI 3046 were collected home and abroad to investigate the characterics of mycelial growth on synthetic media and sawdust media. The possibility of artificial culture of Lentinus edodes on media composed of different saw dusts and adding materials was investigated. Results were as follows: The optimum temperature for growth ranged from $22^{\circ}C$ to $26^{\circ}C$ among the lineages of Lentinus edodes. The optimal growth temperature for ASI 3046 strain and ASI 3047 strain was $26^{\circ}C$ and $22^{\circ}C$, respectively. The optimal carbon source for ASI 3046 strain was glucose, and peptone and ammoinum tartrate were proved excellent as nitrogen sources. When Lentinus edodes was cultured on sawdust media by varying the mixing ratio of different sawdusts and adding materials, mixed sawdust media composed of oak sawdust(50%, v/v), poplar sawdust(50%, v/v), acorn powder(5%, v/v) and rice bran(10%, v/v) showed higher yields of fruit bodies. Results showed that the ideal strain of Lentinus edodes for artificial culture on sawdust media was strain ASI 3046.