• 한국미생물·생명공학회지
• /
• 제10권1호
• /
• pp.45-52
• /
• 1982

A fungus with the highest protopectinase productivity was selected among 205 strains isolated from the soil and identified as a Verticillium sp. The Verticillium sp. was cultivated on wheat bran and the crude extruct of its culture medium showed the highest protopectinase activity on the following conditions: 3 days of cultivation time, 27$^{\circ}C$ of cultivation temperature, 1.2 $m\ell$/g wheat bran of water content, and reinforcement of ammonium nitrate and calcium chloride at the concentration of 0.5 and 0.02%, respectively. The optimum conditions for pectin production from Citrus peel pulp by the protopectinase were consequently obtained as follows: 20$m\ell$/g of liquid volume-to-pulp weight ratio, 4$0^{\circ}C$ of reaction temperature, and 4 of reaction pH. The higher the enzyme concentration, the better the yield of pectin and the shorter the reaction time. Total 45.6mg of pectin/g peel was produced by 1 hour reaction at the enzyme concentration of 10.5 units/$m\ell$. Molecular weight of the pectin produced by the enzyme was estimated to be about 62,000 by Smit and Bryant's method.

• Journal of Biosystems Engineering
• /
• 제32권5호
• /
• pp.348-353
• /
• 2007

A solid state ion sensor module has been developed and evaluated for hydroponic nutrients analysis. The sensor module consisted of five ion-selective electrodes (ISE) fabricated by screen-printing technology. The electrochemical responses of ion sensors for nitrate, ammonium, potassium, calcium, and pH were measured with specially designed 7-channel low voltage signal transducers. The analytical characteristics of the sensors were comparable with those of conventional ISE sensors. The solid state ion sensors exhibit linear relationships over five concentration decades. Detection limit of the sensors were $5.6{\times}10^{-5}{\sim}1.6{\times}10^{-7}M$ depends on ions. Performance test results showed that relative errors of measured ion concentrations were less than 5% for $NO_3{^-},\;K^+,\;Ca^{2+}$ ion, and pH. The concentration of $NO_3{^-},\;NH_4{^+},\;K^+,\;Ca^{2+}$, and pH ion in standard solution and nutrient solutions could be determined by direct potentiometric measurements without any conditioning before measurements.

• Advances in nano research
• /
• 제2권4호
• /
• pp.179-186
• /
• 2014

Indium-nitrogen co-doped zinc oxide thin films (INZO) were prepared on glass substrates in the atmosphere by ultrasonic spray pyrolysis. The aqueous solution of zinc acetate, ammonium acetate and different indium sources: indium (III) chloride and indium (III) nitrate were used as the precursors. After film deposition, different anneal temperature treatment as 350, 450, $550^{\circ}C$ were applied. Electrical properties as concentration and mobility were characterized by Hall measurement. The surface morphology and crystalline quality were characterized by SEM and XRD. With the activation energy analysis for both films, the concentration variation of the films at different heat treatment temperature was realized. Donors correspond to zinc related states dominate the conduction mechanism for these INZO films after $550^{\circ}C$ high temperature heat treatment process.

• 한국분말재료학회지
• /
• 제9권3호
• /
• pp.167-173
• /
• 2002

A new approach to produce nanostructured WC/Co composite powders by a mechanochemical process was made to improve the mechanical properties of advanced hardmetals. Homogeneous spherical W-Co salt powders were made by spray drying of aqueous solution from ammonium metatungstate($(NH_4)_6(H_2W_{12}O_{40})\cdo4H_2O$,AMT) and cobalt nitrate hexahydrate (Co(NO$_3$)$_2$.6$H_2O$). spray dried W-Co salt powders were calcined for 1 hr at $700^{\circ}C$ in atmosphere of air. The oxide powder was mixed with carbon black by ball milling and this mixture was heated with various temperatures and times in $H_2$. The $WO_3/CoWO_4$ composite oxide powders were obtained by calcinations at $700^{\circ}C$. The primary particle size of W/Co composite oxide powders by SEM was 100 nm. The reduction/carburization time decreased with increasing temperatures and carbon additions. The average size of WC particle carburized at $800^{\circ}C$ by TEM was smaller than 50 nm.

• 한국대기환경학회지
• /
• 제12권1호
• /
• pp.79-90
• /
• 1996

Total suspended particles were measured at Kosan, Cheju Island, Korea during the period of March 11 .sim. April 19, 1994. Concentrations of non-sea salt(nss) ions were higher than those measured at clean marine areas in Japan and other background marine areas in the world. Especially, nss sulfate concentration is compatable to thoes measured at Seoul. It is suggested that most nss sulfate concentration is originated from anthropogenic sources. Nss sulfate concentration shows strong correlation with ammonium and nss potassium concentrations while shows no a pparent correlation with nitrate and nss calcium concentrations. Nss calcium concentrations shows strong correlation with nss potassium and mss magnesium concentrations. It is deduced that nss potassium has two origins, one anthropogenic, the other crustal. Backward trajectory analysis results show the trajectories of air parcel during the measurement period were mostly originated from China. It is shown that cases of high nss sulfate with high nss calcium can occur when an air parcel originated from arid and semi-arid regions of morthwestern China or Mongolia passes through northeastern China.

• 연구논문집
• /
• 통권23호
• /
• pp.93-107
• /
• 1993

The chemistry and performance characteristics of the EBDS process have been introduced, in which experimental results from laboratory, test plant, and pilot plant studies agree very well and can be understood from detailed kinetic models. The parametric dependencies of the NOx and $SO_2$, removal yields on the input conditions have been discussed and formulated quantitatively. The process is best suited for flue gas with high $SO_2$, loadings. The operation conditions, such as dose, ammonia, and water additions, can be adjusted fast upon load changes. The process works waste water free and the major product is a mixture of ammonium nitrate and sulfate that can be used as fertilizer. The up-date results show that the EBDS technology is safe and competitive with other already well-established technologies. Due to these interesting features, the electron beam process has gained much international recognition. Demonstration units of 100MW have been proposed in the United States and Japan. Further pilot plants are under construction in Poland and China, countries that make abundant use of highsulfur coal. Additional research activities are under way to further improve the energy efficiency of process, and accelerator prices have been decreasing during the past 10 years. So the EBDS process has a good chance to start a new generation of emission-control technology.

• KSBB Journal
• /
• 제10권2호
• /
• pp.113-118
• /
• 1995

P. spiculispoTum으로부터 생산되는 미생물계변활 성제인 S-acid의 전구체인 O-acid 생산에 영향을 주는 인자들을 검토하고 포도탕 유가배양을 통해 최 척생산조건을 조사하였다. 탄소원으로 oil 등은 별 영향을 마치지 않았고 포도당이 O-acid 생산에 적절 한 탄소원이였으며 무기질소원으로는 $NH_4NO_3$가 높은 O-acid 생산량을 보였다. 미량원소인 $CaCl_2, FeSO_4$등의 첨가에 의해 약 20% 정도의 O-acid가 증가되었으며 용존산소는 포화에 가깡게 유지한 경 우 생산량은 40% 증가되였다. 배양 중 포도당농도는 $50g/\ell$로 유지하는 것이 최적이었으며 Fermentor 에서 포도당의 유가식공급에 의한 경우, 회분식에 비하여 약 60% 의 O-acid 생산증가를 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1296-1299
• /
• 2004

MIM capacitor has been investigated for the next generation DRAM. Conventional poly-Si bottom electrode cannot satisfy the requirement of electrical properties and comparability to the high k materials. New bottom electrode material such as ruthenium has been suggested in the fabrication of MIM structure capacitor. However, the ruthenium has to be planarized due to the backend scalability. For the planarization CMP has been widely used in the manufacture of integrated circuit. In this research, ruthenium thin film was Polished by CMP with cerium ammonium nitrate (CAN)base slurry. HNO3 was added on the CAN solution as an additive. In the various concentration of chemical and alumina abrasive, ruthenium surface was etched and polished. After static etching and polishing, etching and removal rate was investigated. Also microroughness of surface was observed by AFM. The etching and removal rate depended on the concentration of CAN, and HNO3 accelerated the etching and polishing of ruthenium. The reasonable removal rate and microroughness of surface was achieved in the 1wt% alumina slurry.

• 한국환경과학회지
• /
• 제15권5호
• /
• pp.439-446
• /
• 2006

The effluent discharge standards of industrial wastewater has become more stringent since 2003. Many industrial wastewater treatment plants has been upgraded to advanced treatment facilities. There are high concentrations of nitrate(>200 mg/L) and ammonium(>50 mg/L) nitrogen in the acrylic fiber wastewater of H textile Co. Wastewater from acrylic fiber industry containing acrylonitrile, which may affect the subsequent biological treatment process. Manufacturing of acrylic fiber also produces shock loadings. Excessive acrylonitrile and polymer debris produced in the polymerization process was screened, coagulated with CaO and settled down. A preaeration system was added to treat this high pH effluent to remove volatile organic compound and ammonia nitrogen by the air stripping effect. it was found that nitrification rate was not sufficient in the Anoxic/Oxic(AO) process. One denitrification tank was converted to nitrification reactor to extend HRT of nitrification. Nitrification rate of ammonia nitrogen was promoted from 32% to 67% by this modification and effluent nitrogen concentration was well satisfied with the effluent standards since then.

• 한국버섯학회지
• /
• 제1권1호
• /
• pp.21-27
• /
• 2003

국내외에서 수집된 큰양송이(포토벨라)의 균주와 양송이 ASI707을 공시하여 균사체 배양조건과 균주별 자실체의 형태적 특성을 조사한 결과는 다음과 같다. 퇴비추출배지에서 균사생장이 우수하였고, 최적배양온도는 $25^{\circ}C$, pH는 7.0 이었다. 균사생장에 가장 적합한 탄소원으로 Sucrose와 Starch 질소원으로는 Malt extract가 선발되었고 최적 C/N율은 10이었다. 인공재배한 자실체는 공시균주간에 갓크기, 갓두께 등에서 큰 차이가 없었으나 개체중은 25.8~33.8g 내외로 균주간에 다소 차이를 보였다. 공시균주 중 KME59007은 다발성으며 평당 수량도 44.6kg으로 가장 많았다.