• 제목/요약/키워드: Ammonium Hydroxide

검색결과 169건 처리시간 0.027초

대합 Meretrix lusoria의 인공수정 및 발생에 관한 연구 (STUDIES ON THE ARTIFICIAL FERTILIZATION AND DEVELOPMENT OF MERETRIX LUSORIA)

  • 최신석;송용규
    • 한국수산과학회지
    • /
    • 제7권1호
    • /
    • pp.1-6
    • /
    • 1974
  • 1973년 6월 20일부터 동년 8월 25일까지 사이에 Meretrix lusoria의 성숙난에 $NH_4OH$ 해수용액을 규정농도별로 처리한 후의 인공수정율, 초기발생과정 및 유생의 변태과정을 조사하였다. 1. M. lusoria의 $NH_4OH$ 해수용액 처리에 의한 규정농도별 수정률은 1/1000 N의 $NH_4OH$ 해수용액 처리로 가장 높은 인공수정률을 얻었고, 이렇게 처리된 후 인공수정된 난의 발생과정도 정상적임을 확인하였다. 2. M. lusoria의 초기발생과정에서는 수정후 1시간 35분이 지나면 2할기, 4시간 40분에 포배기, 6시간 15분에 Trochophore기에 달함을 볼 수 있었다. 3. M. lusoria의 유생을 사육한 결과, 수정후 10이 지나면 원각의 평균각장이 $112\mu$인 초기 D형에, 7일이 지나면 평균 각장이 $172\mu$인 각정기에, 20일이 지나면 평균 각장이 $232\mu$인 초기저서기에 달함을 볼 수 있었다. 4. M. luroria의 유생을 실험실내 수조 속에서 사육하며 각장 $272\mu$인 치패을 얻을 수 있었다. 5. M. luroria의 초기 D형기로 부터 변태기까지의 각장(L)과 각고(H)와의 관계는 H=1.02325L-24.46425(상관계수 r=0.99050)의 식으로 표시되었다.

  • PDF

우리나라 토양(土壤)에 있어서 수종(數種) 분산제(分散劑)의 분산능(分散能)에 관(關)하여 (The Dispersion Capacity of Some Chemical Dispersing Agents in Korean Soils)

  • 임정남;조인상;조성진
    • 한국토양비료학회지
    • /
    • 제13권2호
    • /
    • pp.65-70
    • /
    • 1980
  • 우리나라 토양(土壤)의 입도분석(粒度分析)에 적합(適合)한 분산제(分散劑)를 선정(選定)하기 위하여 대표토양(代表土壤) 18점(点)에 대(對)한 표토(表土) 및 심토(深土)의 입도분석(粒度分析) 결과(結果)는 다음과 같다. 1. 토양입자(土壤粒子)가 작을수록 분산제별(分散劑別) 분산능력(分散能力)의 차이(差異)가 커지는 경향(傾向)으로 점토입자(粘土粒子)(<0.002mm)의 분석치(分析値)에 있어서 분산제(分散劑)에 따라 차이(差異)가 컸었다. 2. 분산율(分散率)은 Sodium Pyrophosphate가 가장 높고 다음으로 Sodium Hexametaphophate, Ammonium Hydroxide, Sodium Hydroxide, Sodium Oxalate 순(順)이었다. 3. Sodium Hexametaphosphate는 Volcanic Ash Soil만을 제외(除外)하고 우리나라 모두 토양(土壤)의 입도분석(粒度分析)에 있어서 분산제(分散劑)로써 사용(使用)할 수 있을 것으로 본다. 4. Volcanic Ash Soil의 분산율(分散率)은 분산제(分散劑)를 사용(使用)하지 않은 경우보다 오히려 감소(減少)되는 경향(傾向)이 있으므로 이의 분산방법(分散方法)의 선정(選定)에는 특별(特別)한 주의(注意)가 요망(要望)된다.

  • PDF

Fe3O4 생성에 미치는 황산제일철/황산제이철 몰비와 침전제의 영향 (Effect on the Formation of Fe3O4 with Ferrous Sulfate/Ferric Sulfate Molar Ratio and Precipitants)

  • 엄태형;김삼중;안석진;오경환;서동수
    • 한국자기학회지
    • /
    • 제21권5호
    • /
    • pp.157-162
    • /
    • 2011
  • 황산제일철/황산제이철의 몰비와 침전제 종류(NaOH, $NH_4OH$)를 변화시켜 공침법으로 $Fe_3O_4$를 합성하였다. 합성한 분말의 특성을 평가한 결과 모든 실험조건(황산제일철/황산제이철의 몰비와 침전제의 종류)에서 단일상의 나노 크기 $Fe_3O_4$가 생성 되었다. NaOH를 침전제로 사용한 경우에 $NH_4OH$를 침전제로 사용한 경우보다 입자크기가 작고, 좁은 입도분포를 나타내었다. 동일한 침전제를 사용할 경우에는 혼합 황산철(황산제일철/황산제이철)의 몰비가 증가할수록 입자크기와 결정자 크기가 증가하였으며 입도 분포는 넓어졌다. 모든 실험조건에서 합성된 $Fe_3O_4$ 분말은 초상자성을 나타내었으며 침전제로 $NH_4OH$를 사용하고 혼합 황산철의 몰비를 2.5로 하였을 때 가장 높은 포화자화 값 72 emu/g을 갖는 $Fe_3O_4$를 합성할 수 있었다.

염화(鹽貨)세륨 수용액(水溶液)으로부터 탄산(炭酸)세륨 결정화(結晶化) 특성(特性) 고찰(考察) (Crystallization of cerium carbonate from cerium chloride solution)

  • 김성돈;김철주;윤호성
    • 자원리싸이클링
    • /
    • 제17권6호
    • /
    • pp.10-16
    • /
    • 2008
  • 본 연구는 염화세륨 수용액으로부터 중탄산암모늄의 첨가에 의한 탄산세륨 합성시, 반응 조건(염화세륨 농도: 0.5-2M, 반응온도: $20-60^{\circ}C$)에 따라 형성되는 탄산세륨 결정에 대하여 고찰하였다. 반응성 결정화 과정에서 반응물의 농도 및 반응온도에 따라 lanthanite 형태의 결정상[$Ce_2(CO_3)_3{\cdot}8H_2O$]과 tengerite 형태의 결정상[$Ce_2(CO_3)_3{\cdot}2.5H_2O$] 등 두 형태의 탄산세륨 결정을 얻을 수 있었다. 염화세륨의 농도와 반응온도가 증가함에 따라 탄산세륨의 결정상은 lanthanite에서 tengerite형태로 변하였으며, 함수의 탄산세륨은 건조 조건에 따라 무수의 수산기가 함유된 탄산세륨의 결정상 구조로 전이되었다. Lanthanite와 tengerite 구조의 탄산세륨은 판상의 결정립들이 서로 간에 응집된 상태로서 크기나 형태가 두 결정상 모두 같은 형상을 가지며, 결정립의 크기는 lanthanite구조가 약 $3{\mu}m$, tengerite구조가 약 $5{\mu}m$이었다. 그러나 수산기가 함유된 탄산세륨[$Ce(OH)(CO_3)$]은 침상의 결정립이 응집되어 있는 상태로서 결정립의 크기는 장축이 약 $7{\mu}m$이었으며, 결정수가 함유되어 있는 탄산세륨과 무수의 수산기 함유 탄산세륨의 형상은 서로 다른 형태를 갖고 있음을 알 수 있다.

염화네오디뮴 수용액으로부터 탄산네오디뮴 결정화 (Crystallization of Neodymium carbonate from Neodymium Chloride Solution)

  • 김철주;윤호성;김준수;이승원
    • 자원리싸이클링
    • /
    • 제16권2호
    • /
    • pp.23-31
    • /
    • 2007
  • 본 연구는 염화네오디뮴 수용액으로부터 탄산수소암모늄의 첨가에 의한 탄산네오디뮴 합성 시, 반응에 따라 형성되는 탄산네오디뮴 결정에 대하여 고찰하였다. 결정형의 탄산네오디뮴을 얻기 위해서는 염화네오디뮴 수용액에 투입되는 탄산수소암모늄 수용액의 농도와 반응온도가 중요한 역할을 한다. 무정형의 탄산네오디뮴은 핵생성을 통한 일차입자들의 응집에 의하여 형성되며, 반응물의 농도 및 반응온도 등을 증가시켜 반응속도를 빠르게 함으로서 결정형의 탄산네오디뮴을 얻을 수 있었다. 또한 반응조건에 따라 lanthanite[$Nd_2(CO_3)_3{\cdot}8H_2O$]와 tengerite[$Nd_2(CO_3)_3{\cdot}2.5H_2O$] 결정구조를 갖는 탄산네오디뮴을 합성할 수 없었으며, lanthanite 구조의 탄산네오디뮴은 온도에 민감하고 불규칙한 모양의 덩어리 형태를 가지며, 반면에 tengerite 구조의 탄산네오디뮴은 침상의 형태를 가지고 있음을 알 수 있다. 열분해 거동 고찰 결과 250까지 탄산네오디뮴의 결정수가 분해되고 $420^{\circ}C$부근에서 $CO_2$가 분해되어 $Nd_2O_2CO_3$가 형성되며, $620^{\circ}C$에서 산화네오디뮴 결정화가 시작하여 $700^{\circ}C$ 부근에서 최종적으로 산화네오디뮴의 형성되는 것을 알 수 있다. 또한 소성된 산화네오디뮴의 형상은 탄산네오디뮴의 형상에 의하여 영향 받고 있음을 알 수 있다.

코끼리조개의 인공종묘생산에 관한 연구 I. 산란유발 및 부화 (Studies on the Artificial Seedling Production of Geoduck Clam, Panope japonica I. Spawning Induction and Hatching)

  • 이채성;노섬;박영제
    • 한국양식학회지
    • /
    • 제10권2호
    • /
    • pp.113-121
    • /
    • 1997
  • 강원연안에 서식하는 코끼리조개의 인공종묘생산 기술개발을 목적으로 산란유발 방법 및 수정과 부화를 위한 수온과 염분농도의 최적조건 등을 연구한 결과를 요약하면 다음과 같다. 코끼리조개의 산란유발은 간출자극과 자외선조사해수자극에서는 전혀 반응이 없었다. 수온자극에서는 5월에 15.0-25.0%의 반응을 보였고, 6월에는 10.0%의 반응을 보였다. 그러나 생식소를 절개한 것은 15.0-45.0%로 가장 높은 반응을 보였다. NH 하(4) OH 용액을 해수에 첨가하는 자극에서는 8/1000N-10/1000N에서 15.0%의 반응율을, 그리고 NH 하(4) OH 용액을 생식소에 주사하는 자극은 5/100N-7/100N에서 5.0-10.0%의 반응율을 보였다. 코끼리조개의 수온에 따른 수정율은 수온 11-17$^{\circ}C$범위에서 74.2-89.2%였고, 부화율은 수온 8-$14^{\circ}C$에서 84.3-90.5%로 가장 높았다. 염분 농도에 의한 수정율은 염분 25-$35tetperthousand$범위에서 72.5-88.5%, 부화율은 염분 30-$35tetperthousand$에서 82.7-86.9%였다. 수정과 부화를 위한 수온과 염분농도의 최적조건은 수온 11-$14^{\circ}C$, 염분농도 30-$35tetperthousand$로 나타났다.

  • PDF

Synthesis and Characterization of Y2O3 Powders by a Modified Solvothermal Process

  • Jeong, Kwang-Jin;Bae, Dong-Sik
    • 한국재료학회지
    • /
    • 제22권2호
    • /
    • pp.78-81
    • /
    • 2012
  • $Y_2O_3$ nanomaterials have been widely used in transparent ceramics and luminescent devices. Recently, many studies have focused on controlling the size and morphology of $Y_2O_3$ in order to obtain better material performance. $Y_2O_3$ powders were prepared under a modified solvothermal condition involving precipitation from metal nitrates with aqueous ammonium hydroxide. The powders were obtained at temperatures at $250^{\circ}C$ after a 6h process. The properties of the $Y_2O_3$ powders were studied as a function of the solvent ratio. The synthesis of $Y_2O_3$ crystalline particles is possible under a modified solvothermal condition in a water/ethylene glycol solution. Solvothermal processing condition parameters including the pH, reaction temperature and solvent ratio, have significant effects on the formation, phase component, morphology and particle size of yttria powders. Ethylene glycol is a versatile, widely used, inexpensive, and safe capping organic molecule for uniform nanoparticles besides as a solvent. The characterization of the synthesized Y2O3 powders were studied by XRD, SEM (FE-SEM) and TG/DSC. An X-ray diffraction analysis of the synthesized powders indicated the formation of the $Y_2O_3$ cubic structure upon calcination. The average crystalline sizes and distribution of the synthesized $Y_2O_3$ powders was less than 2 um and broad, respectively. The synthesized particles were spherical and hexagonal in shape. The morphology of the synthesized powders changed with the water and ethylene glycol ratio. The average size and shape of the synthesized particles could be controlled by adjusting the solvent ratio.

Thin Layer Chromatography 법(法)에 의한 ${\alpha}-Solanine$의 정량(定量) (Thin Layer Chromatographic Determination of ${\alpha}-Solanine$)

  • 최은옥;안승요
    • Applied Biological Chemistry
    • /
    • 제24권4호
    • /
    • pp.238-244
    • /
    • 1981
  • Thin-layer chromatography을 이용(利用)하여 감자중(中)의 ${\alpha}-solanine$의 분리(分離), 정량방법(定量方法)을 모색하였다. Methanol-chloroform (2 : 1, v/v) 혼합용매를 이용한 감자 추출액에 0.2N HCl 용액을 가(加)하여 색소물질(色素物質)을 비롯한 불순물(不純物)을 제거한 후 진한 암모니아 용액(溶液)을 가(加)하여 생성(生成)된 침전을 원심분리(遠心分離)(25,000 rpm, $4^{\circ}C$, 10min.)함으로써 solanine의 침전을 얻었다. 얻어진 solanine 침전을 1% $NH_4OH-absolute$ ethanol-chloroform(1 : 2 : 2, v/v)의 용매 system을 사용(使用)한 TLC로 ${\alpha}-solanine$${\alpha}-chaconine$을 분리(分離)하였다. 분리(分離)된 ${\alpha}-solanine$은 Infrared spectrophotometry에 의해서 순도(純度)가 확인(確認) 되었다. 분리(分離)된 ${\alpha}-solanine$을 진한 황산-1% paraformaldehyde(2:1, v/v) 용액(溶液)과 반응(反應)시킨 다음 310nm에서 흡광도(吸光度)를 측정(測定)하여 정량(定量)하였다. ${\alpha}-solanine$의 진한 황산-1% paraformaldehyde에 의한 발색용액(發色溶液)의 molar absorptivity는 2,090이었다.

  • PDF

Alumina Column Chromatography와 HPLC에 의한 토마토의 Dehydrotomatine 및 ${\alpha}$-Tomatine 단리방법 연구 (Analytical Methods for the Isolation of Dehydrotomatine and ${\alpha}$-Tomatine in Tomato Fruits by Use of Alumina Column Chromatography and High-Performance Liquid Chromatography)

  • 최석현;김현룡;이진식
    • 한국식품영양학회지
    • /
    • 제23권4호
    • /
    • pp.556-561
    • /
    • 2010
  • Tomato fruits(Lycoperisicon esculentum) synthesize the glycoalkaloids dehydrotomatine and ${\alpha}$-tomatine, possibly as defense against bacteria, fungi and insects. We developed a new effective method to prepare and purify dehydrotomatine and ${\alpha}$-tomatine that exists in tomato fruits using alumina column chromatography and high performance liquid chromatography (HPLC). The tomato glycoalkaloids(TGA) in tomato was extracted with 2% acetic acid, and then precipitated with ammonium hydroxide(pH=10.5). The dry precipitate substance was applied on alumina column, and then fractionated with water saturated n-butylalcohol. The TGA(Fr. No. 26~36) were collected and dried under reduced pressure. The TGA was performed on a reverse phase HPLC(Inertsil ODS-2, $5\;{\mu}m$), eluted with acetonitrile/20mM $KH_2PO_4$(24:76, v/v) at 208 nm. Two peaks were detected on HPLC, and individual peak was collected by repeating HPLC. Furthermore, to confirm the identity dehydrotomatine and ${\alpha}$-tomatine, each peak isolated was hydrolyzed with 1N HCl into sugar and aglycone tomatidine. The sugars were converted to trimethylsilyl ester derivatives. The nature and molar ratios of sugars were identified by gas-liquid chromatography(GLC) and the aglycone by high-performance liquid chromatography(HPLC). The first peak (Rt=17.5 min) eluted from HPLC was identified as dehydrotomatine, and second peak(Rt=21.0 min) was as ${\alpha}$-tomatine. This technique has been used effectively to prepare and isolate dehydrotomatine and ${\alpha}$-tomatine from tomato fruits.

기수재첩, Corbicula Japonica의 인공종묘생산 (Production of Artificial Seedling of the Brackish water Clam, Corbicula jeponica)

  • 김완기;이채성;이정용;허성범
    • 한국양식학회지
    • /
    • 제15권1호
    • /
    • pp.23-29
    • /
    • 2002
  • 기수재첩의 인공 종묘생산 기술개발의 일환으로 산란기 조사, 산란유발, 난 발생 및 유생의 발달 과정을 관찰 한 결과를 요약하면 다음과 같다. 기수재첩의 산란기는 7월 하순부터 9월 하순가지이며, 주 산란기는 8월 초순부터 9월 중순으로 나타났다. 산란유발은 자외선 조사 자극과 생식소절개 방법으로는 반응이 전혀 없었다. 3$\textperthousand$ 해수의 온도 자극에서는 8월하순에 90.0%, 9월에 75.0%의 높은 반응률을 보였다. NH$_4$OH용액을 3$\textperthousand$ 해수에 첨가하는 자극은 1/1000∼3/1000 N에서 15∼45%의 반응률을 보였다. 기수재첩의 수정난은 직경 86${\pm}$3 um의 구형이다. 수정난의 발생은 23.0∼24.5$^{\circ}C$에서 2시간 후 4세포기로 되고, 15시간이 지나면 담륜자 유생 (trochophore larvae),수정 후 2일째에는 D상 유생, 9일째에는 각정기로 성장하였다. 수정 16일째에는 성숙 유생으로 성장하여 저서 생활을 시작하였다.