• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.3
• /
• pp.145-149
• /
• 2018

The objective of this study was to determine the effect of injection application of pig slurry on ammonia ($NH_3$) and nitrous oxide ($N_2O$) emission from timothy (Phleum pretense L.) sward. The three treatments were applied: 1) only water as a control, 2) pig slurry application by broadcasting, 3) pig slurry application by injection. The pig slurry was applied at a rate of $200kg\;N\;ha^{-1}$. Total $NH_3$ and $N_2O$ emission, expressed as a cumulative amount throughout the measurement time (40 days), was $2.68kg\;NH_3-N\;ha^{-1}$ and $6.58g\;N_2O-N\;ha^{-1}$, respectively, in the control. The injection application of pig slurry decreased total $NH_3$ and $N_2O$ emission by 39.8% and 33.3%, respectively, compared to broadcasting application of pig slurry. The present study clearly showed that injection application exhibited positive roles in reducing N losses through $NH_3$ and $N_2O$ emission.

• Journal of Plant Biology
• /
• v.4 no.2
• /
• pp.51-61
• /
• 1961

In order to detect the way of absorption and metaboism of the urea it is sprayed on the surface of the leaves of sunflower. The sunflowers used in this study are grown in different conditions such that the one in nittogen aboundant and the other in nitrogen deficient soil, respectively. The urea-N, ammonia-N, amide-N, and 80% alcohol soluble-N in the leaves were quantitatively determined. All of the nitrogenous components measured are generally tended to increased with rising the concentration of urea except only amide-N at 24 hours after sprayed, and these were highly significances. It seemed that hydrolizing of urea into ammonia and carbon dixide and the assimilation of ammonia into other organic nitrogenous constituents were rapid in the young leaves than in the mature. It is interest that the amide content, in the young leaves and nitrogen defieient one were enhanced with the increasing concentration of urea, although in the mature leaves it did not show any change in the urea treatment. It is presumed that the assimilation rate of ammonia and the urease activity were lower in the matture leaves than in the young and nitrogen deficient leaves. No significance at 5% level showed all of the nitrogenous components except total nitrogen between nitrogen abundant and deficent leaves. Urea content was a high peak at first 12 hours, ammonia at 48 hours, and amide and alcohol soluble nitrogen at 96 hours, whence decrease4d the content of these constituents gradually. The total nitrogen content is not incrased obviously by only one time of urea spray in this study. When the concentration of urea was relatively high there appeared the wilting spots on t도 edge of leaves. As a whole, it seemed that sprayed urea was rapidly absorbed and taken part in nitrogen metabolism within relatively short period.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.9
• /
• pp.1354-1358
• /
• 2005

Nano- and microstructured indium nitride crystals were synthesized by the reaction of indium oxide ($In_2O_3$) powder and its pellet with ammonia in the temperature range 580-700 ${^{\circ}C}$. The degree of nitridation of $In_2O_3$ to InN was very sensitive to the nitridation temperature. The formation of zero- to three-dimensional structured InN crystals demonstrated that $In_2O_3$ is nitridated to InN via two dominant parallel routes (solid ($In_2O_3$)-to-solid (InN) and gas ($In_2O$)-to-solid (InN)). The growth of InN crystals with such various morphologies was explained by the vapor-solid (VS) mechanism where the degree of supersaturation of In vapor determines the growth morphology and the vapor was mainly by the reaction of $In_2O$ with ammonia and partially by sublimation of solid InN. The pellet method was proven to be useful to obtain homogeneous InN nanowires.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.775-778
• /
• 2012

The potential energy surfaces of ammonia molecule adsorptions on the symmetrically chlorinated Si(100)-$2{\times}1$ surface were explored with SIMOMM:MP2/6-31G(d). It was found that the initial nucleophilic attack by ammonia nitrogen to the surface Si forms a $S_N2$ type transition state, which eventually leads to an HCl molecular desorption. The second ammonia molecule adsorption requires much less reaction barrier, which can be rationalized by the surface cooperative effect. In general, it was shown that the surface Si-Cl bonds can be easily subjected to the substitution reactions by ammonia molecules yielding symmetric surface Si-$NH_2$ bonds, which can be a good initial template for subsequent surface chemical modifications. The ammonia adsorptions are in general more facile than the corresponding water adsorption, since ammonia is better nucleophile.

• Clean Technology
• /
• v.29 no.4
• /
• pp.297-304
• /
• 2023

The rapid advancement of the high-tech electronics industry has led to a significant increase in high-concentration ammonia wastewater. Various methods have been attempted to reliably treat wastewater containing high concentrations of ammonia, but no successful technology has yet been developed and applied. In this study, the removal efficiency and characteristics of ammonia nitrogen was evaluated according to changes in temperature, air loading rate, and liquid loading rate using a closed circulation countercurrent packed tower type demonstration facility for wastewater containing high concentrations of ammonia generated in the high-tech electronics industry. The temperature was varied while maintaining operating conditions of a wastewater flowrate of 20.8 m³ h^-1 and an air flow rate of 18,000 Nm³ h^-1. The results showed that at temperatures of 45,50,55, and 60℃, the removal efficiencies of ammonia nitrogen (NH₃-N) were 87.5%, 93.4%, 96.8%, and 98.7%, respectively. It was observed that temperature had the most significant impact on the removal efficiency of NH₃-N under these conditions. As the air loading rate increases, the removal rate also increases, but the increase in removal efficiency is not significant because droplets from the absorption tower flow into the stripping tower. Even if the liquid loading rate was changed by ±30%, the removal rate did not change significantly. This does not mean that the removal rate was unaffected, but was believed to be due to the relatively high air load rate. Through demonstration research, it was confirmed that ammonia stripping is a reliable technology that can stably treat high-concentration ammonia wastewater generated in the high-tech electronics industry.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.1
• /
• pp.45-51
• /
• 1998

The determinations of ammonia in water for drinking purpose served as one basis of judging the sanitary quality of water for a great many years. However, presently ammonia regulation varies depending on countries. In USA and Canada, ammonia is added to water for chloramination process. However, for korea, there is ammonia regulation of treated water in Korea which should not exceed 0.5mg/l as $NH_3-N$. There was a report exceeding 0.5mg/l of ammonia in chlorinated water when the famous drinking water contamination episode happened in the downstream of Nadong River, 1994. With lack of sewer distribution system and treatment plants of domestic wastes, many water treatment plants have a difficulty of complying with ammonia regulation in treated water. Breakpoint chlorination is usually performed to get rid of ammonia. The method which is allowed to measure ammonia in Korea is Phenate method. However, it would be undesirable to use Phenate method for measuring ammonia in chlorinated water if Phenate method would not differentiate ammonia from chloramine. A good possibility of interferences in measurement of ammonia exists because Phenate method include the step of the formation of chlorine and would not differentiate chloramine which is formed as a result of reaction between chlorine and ammonia. This study was on inaccuracy of Phenate method for measuring ammonia of chlorinated water when chloramine and ammonia coexist. This study found that Phenate method measured all chlormaine as ammonia. Ammonia measurement by ion chromatography confirmed this results. Finally, the result from this study suggests that ammonia measurement by Phenate method in chlorinated water should be revised accordingly.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.4
• /
• pp.346-350
• /
• 2009

Although salt is known to influence the performance of nitrification significantly, it has not been well reported on how salt affects ammonia-oxidizing bacterial(AOB) community compositions and dynamics in wastewater treatment bioreactors. In this study, these questions were evaluated in a full-scale bioreactor treating saline wastewater. Clone library analysis for the ammonia monooxygenase subunit A gene revealed that AOB belonging to the Nitrosomonas europaea and the N. oligotropha lineages inhabited in the bioreactor. Terminal restriction fragment length polymorphism analysis for monthly samples demonstrated a fluctuation pattern among AOB populations, although AOB within the N. europaea lineage were dominant during the test period. Correlation analysis between patterns of terminal restriction fragments and environmental variables suggested that sodium, chloride, and sulfate were less important; rather, temperature was the most significant factor affecting the AOB community in the bioreactor.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.3
• /
• pp.199-204
• /
• 2016

The objective of this study was to determine the effect of nitrification inhibitor dicyandiamide (DCD) and urease inhibitor hydroquinone (HQ) on ammonia ($NH_3$) and nitrous oxide ($N_2O$) emission from pig slurry applied to Timothy (Phleum pretense L.) sward. The daily emission of ammonia ($NH_3$) and nitrous oxide ($N_2O$) was monitored for 9 days in three different treatments; 1) control (only pig slurry application), 2) DCD treatment (pig slurry + DCD), and 3) HQ treatment (pig slurry + HQ). Most $NH_3$ emission occurred after 4~5 days in three treatments. Total $NH_3$ emission, expressed as a cumulative amount throughout the measurement time, was $1.33kg\;N\;ha^{-1}$ in the control. The DCD and HQ treatment decreased total $NH_3$ emission by 16.3% and 25.1%, respectively, compared to the control. Total $N_2O$ emission in the control was $47.1g\;N\;ha^{-1}$. The DCD and HQ treatment resulted in a reduction of 67.9% and 41.8% in total $N_2O$ emission, respectively, compared to the control. The present study clearly indicated that nitrification and urease inhibitor exhibited positive roles in reducing N losses through $NH_3$ and $N_2O$ emission.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.4
• /
• pp.503-510
• /
• 2011

Ammonia in water which is toxic to human, its concentration is regulated below 0.5 mg/L in drinking water. Current study aimed to develop appropriate models for ammonia stripping using hollow fiber membrane contactor. Two different models were developed during the study. Model 1 was assumed only free ammonia ($NH_3$) transfer in stripping process, whereas the Model 2 was assumed with total ammonia ($NH_3+{NH_4}^+$) transfer. Ammonium chloride ($NH_4CI$), sodium hydroxide(NaOH) were used to make ammonia solution, which was concentration of 25 mg as N/L at a pH of 10.5. The experimental conditions were such that, the liquid flow was in tube-side in upward direction and t he gas flow was on shell-side in downward direction a t room temperature. The experimental and modeling results showed that marginal difference were observed at low gas flux. However the difference between the both models and experimental value were increased when the gas flux was increased. The study concludes that the Model 1 with free ammonia is more appropriate when both models were compared and useful in ammonia stripping process at low gas flux.

• Journal of Environmental Science International
• /
• v.30 no.12
• /
• pp.1093-1100
• /
• 2021

The present study investigated the effect of ammonia load on microbial communities in mesophilic anaerobic digestion of propionic acid. A laboratory-scale continuous anaerobic digester treating propionic acid as a sole organic substrate was operated under non-inhibitory condition and inhibitory conditions with ammonia (1.5 g and 3.5 g ammonia-N/L, respectively), and bacterial and archaeal communities in the steady states of each ammonia condition were analyzed using high-throughput sequencing. Thirteen bacterial families were detected as abundant bacterial groups in mesophilic anaerobic digestion of propionic acid. Increase in ammonia concentration resulted in significant shifts in microbial community structures. Syntorophobacter, Pelotomaculum, and Thermovigra were determined as the dominant groups of (potential) propionate oxidizing bacteria in the non-inhibitory condition, whereas Cryptanaerobacter and Aminobacterium were the dominant groups of (potential) propionate oxidizing bacteria in the ammonia-inhibitory condition. Methanoculleus and Methanosaeta were the dominant methanogens. Acetate-oxidation coupled with hydrogenotrophic methanogenesis might be enhanced with increases in the relative abundances of Methanoculleus and Tepidanaerobacter acetatoxydans under the ammonia-inhibitory condition. The results of the present study could be a valuable reference for microbial management of anaerobic digestion systems that are exposed to ammonia inhibition and propionic acid accumulation.