• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.806-812
• /
• 2008

귀금속촉매 존재하에서 암모니아 전환반응은 배가스내의 암모니아를 처리하는데 중요한 기술이다. 과잉용액 함침법을 이용하여 $Pt-Rh/Al_2O_3$, $Pt-Rh/TiO_2$, $Pt-Rh/ZrO_2$, $Pt-Pd/Al_2O_3$, $Pd-Rh/Al_2O_3$, $Pd-Rh/TiO_2$, $Pd-Rh/ZrO_2$, $Pt-Pd-Rh/Al_2O_3$, $Pd/Ga-Al_2O_3$, $Rh/Ga-Al_2O_3$, 그리고 $Ru/Ga-Al_2O_3$의 촉매를 제조하였다. 제조된 촉매는 1/4"의 반응기에 $10,000{\sim}50,000hr^{-1}$의 공간속도 조건하에서 촉매활성능 실험을 수행하였다. 암모니아의 초기농도는 2,000 ppm (나머지는 공기)으로 유지하였다. $T_{50}$는 암모니아 전환율이 50%일 때를 나타내는 온도를, $T_{90}$은 90%의 전환율일 때의 온도를 나타낸다. 알루미나를 담지체로 사용했을때의 $T_{50}$와 $T_{90}$은 다른 담체를 사용했을때의 $T_{50}$와 $T_{90}$보다 훨씬 낮았다. Pd-Rh촉매의 경우 $Al_2O_3$를 담체로 사용하였을 때 $ZrO_2$나 $TiO_2$보다 저온 활성이 우수하게 나타났다. 황산화물의 피독실험 결과 본 연구에서는 최종적으로 $Pt-Rh/Al_2O_3$ 촉매가 다른 촉매에 비하여 우수함을 보였다. 실험결과 Pt-Rh가 암모니아 전환공정에서 유용한 촉매라는 사실을 알 수 있다.

• 한국자동차공학회논문집
• /
• 제20권6호
• /
• pp.73-82
• /
• 2012

The main and side reactions of the three selective catalytic reduction (SCR) reactions with ammonia over a vanadium-based catalyst have been investigated using synthetic gas mixtures in the temperature range of $170{\sim}590^{\circ}C$. The three SCR reactions are standard SCR with pure NO, fast SCR with an equimolar mixture of NO and $NO_2$, and $NO_2$ SCR with pure $NO_2$. Vanadium based catalyst has no significant activity in NO oxidation to $NO_2$, while it has high activity for $NO_2$ decomposition at high temperatures. The selective catalytic oxidation of ammonia and the formation of nitrous oxide compete with the SCR reactions at the high temperatures. Water strongly inhibits the selective catalytic oxidation of ammonia and the formation of nitrous oxide, thus increasing the selectivity of the SCR reactions. However, the presence of water inhibits the SCR activity, most pronounced at low temperatures. In this study, the experimental results are analyzed by means of a dynamic one-dimensional isothermal heterogeneous plug-flow reactor (PFR) model according to the Eley-Rideal mechanism.

• 한국수소및신에너지학회논문집
• /
• 제23권4호
• /
• pp.382-389
• /
• 2012

Power generation cycle using ammonia-water mixture as working fluid has attracted much attention because of its ability to efficiently convert low-temperature heat source into useful work. If an ammonia-water power cycle is combined with a power cycle using liquefied natural gas (LNG), the conversion efficiency could be further improved owing to the cold energy of LNG at $-162^{\circ}C$. In this work parametric study is carried out on the thermodynamic performance of a power cycle consisted of an ammonia-water Rankine cycle as an upper cycle and a LNG cycle as a bottom cycle. As a driving energy the combined cycle utilizes a low-temperature heat source in the form of sensible heat. The effects on the system performance of the system parameters such as ammonia concentration ($x_b$), turbine 1 inlet pressure ($P_{H_1}$) and temperature ($T_{H_1}$), and condenser outlet temperature ($T_{L_1}$) are extensively investigated. Calculation results show that thermal efficiency increases with the increase of $P_{H_1}$, $T_{H_1}$ and the decrease of $T_{L_1}$, while its dependence on $x_b$ has a downward convex shape. The changes of net work generation with respect to $P_{H_1}$, $T_{H_1}$, $T_{L_1}$, and $x_b$ are roughly linear.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.285-285
• /
• 2013

Recently, hexagonal boron nitride (h-BN), which is III-V compound of boron and nitride by strong covalent sp2 bonds has gained great interests as a 2 dimensional insulating material since it has honeycomb structure with like graphene with very small lattice mismatch (1.7%). Unlike graphene that is semi-metallic, h-BN has large band gap up to 6 eV while providing outstanding properties such as high thermal conductivity, mechanical strength, and good chemical stability. Because of these excellent properties, hBN can potentially be used for variety of applications such as dielectric layer, deep UV optoelectronic device, and protective transparent substrate. Low pressure and atmospheric pressure chemical vapor deposition (LPCVD and APCVD) methods have been investigated to synthesize h-BN by using ammonia borane as a precursor. Ammonia borane decomposes to polyiminoborane (BHNH), hydrogen, and borazine. The produced borazine gas is a key material that is a used for the synthesis of h-BN, therefore controlling the condition of decomposed products from ammonia borane is very important. In this paper, we optimize the decomposition of ammonia borane by investigating temperature, amount of precursor, and other parameters to fabricate high quality monolayer h-BN. Synthesized h-BN is characterized by Raman spectroscopy and its absorbance is measured with UV spectrophotometer. Topological variations of the samples are analyzed by atomic force microscopy. Scanning electron microscopy and Scanning transmission Electron microscopy are used for imaging and analysis of structures and surface morphologies.

• Asian Journal of Atmospheric Environment
• /
• 제4권1호
• /
• pp.55-61
• /
• 2010

The sensitivity of aerosol light extinction coefficient to the aerosol chemical composition change is estimated by (1) calculating the aerosol water content and chemical concentrations by a gas/particle equilibrium model and (2) calculating the aerosol light extinction coefficient by a Mie theory based optical model. The major chemical species are total (gas and particle phase) sulfuric acid, total nitric acid, and total ammonia which are based on the measurement data at Seoul and Gosan. At Seoul, since there were enough ammonia to neutralize both total sulfuric acid and total nitric acid, the dry ionic concentration is most sensitive to the variation of the total nitric acid level, while the total mass concentration (ionic concentration plus water content) and thus, the aerosol light extinction coefficient are primarily determined by the total sulfuric acid. At Gosan, since the concentration of ambient sulfuric acid was the highest among the inorganic species, sulfate salts determined aerosol hygroscopicity. Thus, both ionic and total mass concentration, and resultant aerosol light extinction coefficient are primarily determined by the sulfuric acid level.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.365-365
• /
• 2010

In this paper, silicon nitride thin films with different silane and ammonia gas ratios were deposited and characterized for the antireflection and passivation layer of high efficiency single crystalline silicon solar cells. As the flow rate of the ammonia gas increased, the refractive index decreased and the band gap increased. Consequently, the transmittance increased due to the higher band gap and the decrease of the defect states which existed for the 1.68 and 1.80 eV in the SiNx films. The reduction in the carrier lifetime of the SiNx films deposited by using a higher $NH_3/SiH_4$ flow ratio was caused by the increase of the interface traps and the defect states in/on the interface between the SiNx and the silicon wafer. The silicon and nitrogen rich films are not suitable for generating both higher carrier lifetimes and transmittance. These results indicate that the band gap and the defect states of the SiNx films should be carefully controlled in order to obtain the maximum efficiency for c-Si solar cells.

• 한국동물위생학회지
• /
• 제29권1호
• /
• pp.27-36
• /
• 2006

This studies were carried out to investigate the rearing managements of pig farms and survey on pneumonia of the slaughtered pigs from 5 selected herds located in Jangsu, Jeonbuk. Isolated aerobic microorganisms from pneumonic lung were examined antibiotic susceptibility and tested serological antibody titers of the herd base. Prevalence rate of pneumonia were examined according to rearing and health management conditions of pig farms. Prevalence rate of pneumonia were detected in 78.8% and enzotic pneumonia. In 47.7%, pleuropneurnonia in 31.1%. In serological antibody titers showed the positive reaction with 54.4% in Actinobacillus pleuropneumonia serotype 5, 44.8% in Pasteurella multocida, 36.8% in A pleuropneurnonia serotype 2, 13.6% in Mycoplasmal pneumonia. Isolated aerobic microorganisms were examined antibiotic susceptibility and showed the high activity in gentamicin (58.3%), enrofloxacin (53.3%), norfloxacin (51.6%), cephalothin (41.7%) and low activity in amoxycillin (98.3%), oxytetracycline (98.3%), penicillin G (90.0 %), tetracycline (88.4%), ampicillin (88.3%). Farm managements were deficient effect of humidity in swine house but ammonia gas all appeared the 10 ppm that were recommendation density, below.

• 열처리공학회지
• /
• 제1권1호
• /
• pp.8-12
• /
• 1988

This study has been carried out to evaluate gaseous nitrocarburizing treatment undertaken for pure iron at $570^{\circ}C$ in an atmosphere containing 50% endothermic gas, generated from natural gas, and 50% ammonia. The results obtained from the experiment are as follows ; 1) The microstructure of gaseous nitrocarburized pure iron consists of the compound layer on the surface and the diffusion zone beneath it. The compound layer progresses uniformly into ferrite with a thickness of $20{\mu}$ obtained after treating for 3 hours. 2) Chemical analysis has shown that the compound layer has a C/N ratio of 0.19 and that the average combined interstitial content of the compound layer is about 30 atomic percent, which is close to the lower limit of the ${\varepsilon}$-carbonitride phase field in Fe-C-N phase diagram. 3) X-ray diffraction analysis has revealed that the compound layer consists mainly of the c.p.h. phase, ${\varepsilon}-Fe_3$(C.N) and a small amount of $Fe_4N$ and traces of ferrite are also present in the compound layer. 4) The microhardness of the compound layer is about 600 V.H.N and shows a relatively sharp fall-off at the compound layer/diffusion zome interface. 5) The average actual degree of ammonia dissociation is calculated to be 27% for a gaseous nitrocarburizing treatment carried out at $570^{\circ}C$.

• 한국분무공학회지
• /
• 제24권2호
• /
• pp.51-57
• /
• 2019

In this study, the spray atomization characteristics of urea injector used in SCR system for construction machinery was analyzed, and the uniformity index at the front of mixer and NOx conversion efficiency were evaluated through numerical analysis. Spray visualization and droplet size/velocity measurement were performed and the measured results were used to verify the spray analysis model to calculate the uniformity index in the exhaust gas after-treatment system. For the flow analysis, STAR-CCM, a three-dimensional CFD, was used and the uniformity index of the SCR system at the front of the mixer was calculated using the droplet dissociation model and the wall collision model. Finally, the DeNOx performance for the average condition of the NRTC driving mode was calculated to understand the NOx conversion efficiency reflecting the exhaust gas temperature. The simulation results show that the uniformity index at the front of mixer was calculated as 0.862 and DeNOx efficiency was 75.9%.

• 한국환경과학회지
• /
• 제31권1호
• /
• pp.99-102
• /
• 2022

The aim of this study was to investigate the effect of manure additives mixed with probiotics and zeolite on harmful gas production generated by pig slurry. A total of 180 crossbred pigs ([Yorkshire × Land race] × Duroc, live weight 70±3.21 kg) were allotted to a completely randomized design with 3 treatments and 3 replications (20 heads per replicate). The treatments consisted of 0% (control), 0.05% (T1), or 1% (T2) of manure additives mixed with probiotics and zeolite. Manure additives were added weekly to pig slurry pits (2 m × 4.5 m × 1.2 m) on a volumetric basis. For ammonia measured at both 10 cm and 90 cm above the pig slurry pit, a statistical significance (p<0.05) was found in probiotics and zeolite-treated manure additives at weeks 1 - 3, except for week 0. In addition, hydrogen sulfide levels measured at 10 cm above the pig slurry pit were not affected by the manure additive at weeks 0 and 1, but showed a significant statistical difference at weeks 2 and 3 (p<0.05). Therefore, supplementing pig slurry with 0.05% and 0.1% manure additives mixed with probiotics and zeolite was found to be effective in reducing environmental pollution in pig facilities.