• Journal of Environmental Health Sciences
• /
• v.13 no.2
• /
• pp.9-24
• /
• 1987

This study was conducted to measure the diurnal variation and behaviour of atmospheric mercury in an urban area by gold amalgamation and cold vapour atomic absorption spectrophotometry. The results were as follows: 1. The Hg concentration in ambient air averaged. 21.13ng/m$^3$ for 111 determinations (C.V. 78.5) in urban area and 5.91ng/m$^3$ for 140 determinations (C.V. 21.3) in suburban area. The urban area concentration was significantly higher and fluctuated more than its rural counterpart. 2. Regression analysis of the interaction between mercury concentration and other components showed a significant correlation between mercury concentration and sulfur dioxide also, TSP were found. Mercury concentration was shown to have a similar behaviour, on the whole, with other air pollutants. 3. It demonstrated a positive correlation with sunlight (UV-ray), while it had a negative response to wind speed and humidity. Its concentration showed a tendensy to increase during calm weather specifically. 4. The Hg concentration at the Mt. Dok You inland clean area ranged from 1.33ng/m$^3$ to 2.0ng/m$^3$, with a mean value of 1.63ng/m$^3$.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.3
• /
• pp.174-182
• /
• 2011

The present study evaluated the major lead sources in a steel metallurgy industrialized city by measuring lead isotopes/lead concentrations of ambient air and potential sources in an industrial area and residential areas according to relative distance. The quality control program obtained during the measurement procedure for lead isotopes and concentrations exhibited $0.5ng/m^3$ for method detection limit, more than 90% for recoveries of standard particulate matters, and lower than 0.2% for reproducibility errors of four lead isotopes ($^{204}Pb$, $^{206}Pb$, $^{207}Pb$, $^{208}Pb$). For all three lead isotope ratios ($^{206}Pb/^{204}Pb$, $^{207}Pb/^{206}Pb$, $^{208}Pb/^{206}Pb$), the ratios were obtained in the industrial area were closer to nearby residential area than those of a residential area far away from the industrial area, thereby suggesting that lead sources were more similar each other in the industrial and nearby residential area. Furthermore, for both summer and winter seasons ambient lead concentrations were more than four times higher in the industrial area than in the residential areas and in turn, they were higher in the nearby residential area compared with the far-away residential area. As a result, it was suggested that lead emitted from the industrial area would influence more the ambient lead in the nearby residential area than the far-away residential area. Both slag and traffic emissions are likely to be major lead sources in the industrial and nearby residential areas, since their three lead isotope ratios ($^{206}Pb/^{204}Pb$, $^{207}Pb/^{206}Pb$, $^{208}Pb/^{206}Pb$) were similar to the ratios obtained from ambient air of these two areas. In addition, the lead isotope ratios revealed different pattern between seasons, and the ambient lead concentrations were higher for winter than for summer.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.4
• /
• pp.303-309
• /
• 2006

The study examined the effects of $CO_2$ enrichment on growth of soybean (Glycine max). Two soybean varieties were used, Taekwang and Cheongja. The plants were grown in growth chambers with a 12-h photoperiod and a day/night temperature of $28/21^{\circ}C$ at the seedling stage and $30/23^{\circ}C$ from the flowering stage. The plants were exposed to the two elevated $CO_2$ levels of 500 and 700 ppm and the ambient level of 350 ppm. Results of the experiment showed that at the second-node trifoliate stage of the two varieties, the elevated $CO_2$ increased plant height, leaf area and dry weight. The elevated $CO_2$ also raised the photosynthetic rate of soybean as compared to the ambient level. From the beginning bloom stage to the full maturity stage of the two varieties, the elevated $CO_2$ increased plant height, leaf area, seed weight and photosynthetic rate. The stomatal conductance and transpiration rate decreased on long days relative to short days of treatment. Through the entire stages, the elevated $CO_2$ increased the water use efficiency of soybean plants because stomatal conductance and transpiration rate decreased at the elevated $CO_2$ levels relative to the ambient level.

• Journal of Environmental Health Sciences
• /
• v.7 no.2
• /
• pp.89-95
• /
• 1981

A Continuous monitoring of Air Pollution in city of Seoul was carried out from January 1 to December 31 of 1979 at two selected sites, Kwanghwamun observatory and Kwanag observatory. The measured data were averaged on monthly basis. The maximun value of oxidant pollution was observed in July, and the minimum in February. It is the purpose of this study to determine the effect of hydrocarbon, nitrogenoxide, wind velocity and ambient temprature on the observed values of oxidant pollution for the above two months. The results of the study may be summarized as follows. 1) The oxidant concentration in February was higher than in July by about 2 times in both downtown area and the suburbia. The concentration in downtown area was $25.75\pm 4.75ppb$, and that in suburbia was $29.83\pm 5.16ppb$. As for the oxidant concentration in July, it was observed that the suburban area ($26.464\pm 7.59ppb$) had about 2.8 times higher value than the downtown area ($9.284\pm 1.55ppb$). 2) The peak oxidant concentration of suburban area during the daytime is occured from noon to 5:00 P.M.. These patterns are similar to the classical patterns, but the peak Oxidant Concentration of downtown area in February was occured at 9:00A.M. 3) The overall level of nitrogen oxide pollution was much higher in downtown area than in suburban area. Two peaks of nitrogen oxide concentration occured at 10 A.M. and 12 midnight in downtown area. This observation agrees with the report that the air pollution is higher in the area where the pollution sources are concentrated. 4) The multiple correlation analysis for the oxidant and the other variables measured in February in downtown area showed close correlation with nitrogen oxide and ambient temprature. The multiple correlation coefficient of oxidant with nitrogen oxide was 0.872, and that with nitrogen oxide and temperature simultaneously was 0.903. The multiple correlation equation used for this study may be expressed as follows:

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.2
• /
• pp.105-115
• /
• 1994

This study was conducted to assess the health risk of carcinogenic heavy metals such as arsenic, nickel, chromium and cadmium Ambient concentrations of these metals were measured bimonthly, during May 1987 to March 1988. Respirable Particle concentrations of As, Ni, Cr, Cd in traffic area(Shinchon) were 16ng/㎥, 43ng/㎥, 4.2ng/㎥, 6.6ng/㎥, respectively, and in residential area(Bulkwang) were 25ng/㎥, 32ng/㎥, 4.7ng/㎥, 8.9ng/㎥, respectively. Carcinogenic risk of each metal was calculated by multiplication of ambient concentration and unit risk of the metal which was referred to recent version of Integrated Risk Information System(IRIS). Sum of the risk from these for metals was 9.8$\times$10$^{-5}$ as individual risk in traffic area and 13.9$\times$10$^{-5}$ in residential area.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.1
• /
• pp.46-58
• /
• 2017

Objectives: Particulate matter (PM) at construction sites mostly originates from either construction activities or the atmospheric environment. This study was conducted to evaluate the exposure level to PM and the contribution ratio of atmosphere sources at construction sites. Methods: We reviewed literature and governmental systems related to PM exposure in occupational settings and summarized them. In the field evaluation, five construction sites and one golf course were selected: two from Gyeonggi-do Province and four from North Gyeongsang-do Province. For each site, personal samples from outdoor construction workers and area samples from the outdoor area around the construction site office were collected according to construction work types. PM concentrations reported from nearby National Ambient Air Monitoring Stations were recorded. Respirable dust concentrations, respirable silica concentrations, and several metal concentrations including Cd, Cr, Pb, and As were monitored over four months. In the end we suggested how to manage particulate matter exposure at construction sites. Results: There was little literature reporting on exposure levels of construction workers to PM. Respirable dust concentrations measured in Gyeonggi-do Province were higher than those measured in North Gyeongsang-do Province. The geometric means of respirable dust concentrations in personal samples and area samples were $37.89{\mu}g/m^3$ and $92.86{\mu}g/m^3$, respectively. The respirable dust concentrations were higher than the PM concentrations reported from nearby National Ambient Air Monitoring Station. The geometric means of respirable silica concentrations of personal samples and area samples were $1.3{\mu}g/m^3$ and $1.1{\mu}g/m^3$, respectively. All metal concentrations were lower than 10% of individual Korean occupational exposure limits. Conclusions: Assuming that personal samples consisted of ambient PM and dust originating from work activities and area samples only collected ambient PM, we concluded that the dust exposure of outdoor construction workers originated 40.8% from the atmosphere and 59.2% from construction activities. PM exposure at construction sites should be controlled by employers, as in the case of outdoor heat stress. The Korean government needs to consider setting an occupational exposure limit for respirable dust.

• Journal of the Korean Ceramic Society
• /
• v.33 no.12
• /
• pp.1394-1402
• /
• 1996

The Silica gel with the density of 0.2g/cm3 and porosity of 90% was synthesized. The silica wet gel was dried and heat-treated under the ambient pressure after modification of the wet gel surface by TMCS. Specific surface area total pore volume and mean pore radius of dried gel were all increased with increasing heat treatment temperature and confirmed about 1400m2/g, 4.5cc/g and 8 nm respectively after heat treatment above 25$0^{\circ}C$. But the pore size distribution of dried gel was in the range of 1-100nm and was almost indepen-dent of temperature. As the result of external shape pore characteristics and microstructure of gel using SEM similar properties were observed between the silica gel synthesized in this study and the silica aerogel through the super critical drying.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2003.11a
• /
• pp.89-93
• /
• 2003

The ambient noise in modem society is the factor to give people serious influence. Noise barriers installation is mostly used in the apartment estate to protect countermeasure about the road traffic ambient noise. The purpose of this study is to suggest reference data fur design of traffic noise reduction in apartment estate. It finds out how the traffic noise is measured about a noise barriers and physical characteristics. The 57dB was measured from the noise barriers in a 2m point. An ambient noise's of the part to belong noise attenuation is big at the sound arresting area of the noise barriers as the distance far.

• Structural Engineering and Mechanics
• /
• v.89 no.4
• /
• pp.335-347
• /
• 2024

This study pioneers the exploration of creep and shrinkage behavior in ambient-cured geopolymer concrete (GPC), a vital yet under-researched area in concrete technology. Focusing on the influence of sodium hydroxide (NaOH) solution concentration, the research utilizes low calcium fly ash (Class-F) and alkaline solutions to prepare two sets of GPC. The results show distinct patterns in compressive strength development and dry shrinkage reduction, with a 14 M NaOH solution demonstrating a 26.5% lower dry shrinkage than the 16 M solution. The creep behavior indicated a high initial strain within the first 7 days, significantly influenced by curing conditions and NaOH concentration. This study contributes to the existing knowledge by providing a deeper understanding of the time-dependent properties of GPC, which is crucial for optimizing its performance in structural applications.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.205-211
• /
• 1998

The MTF(modulation transfer function) measuring system with a linear CCD(charge coupled-device) was constructed to cvaluate a color CRT(catode ray tube). The measured MTF values were corrected by considering the spectral response and the pixel sizes of CCD. The effects of a spot size, video bandwidth, pitch of shadow mask holes, display luminance, and ambient illumination on image quality were studied. The uniformity of resolution and the contrast Ioss by ambient light of the color CRT monitor were measured, and the results were analyzed by MTFA(modulation threshold area).