• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.374-381
• /
• 2019

A conventional approach for the treatment of long-span edentulous areas is the use of removable dentures. However, placing implants in these areas results in superior functional outcomes by increasing the stability, support, and resistance of the prostheses and improving the masticatory efficiency. Treatment modalities utilizing implants can be further classified into either removable or fixed-type prostheses. Several factors such as the amount of alveolar bone resorption, inter-arch relationship, patient preferences, and socioeconomic status should be considered when determining the appropriate treatment approach. Monolithic zirconia has been considered a suitable material for implant-supported fixed dental prosthesis, because of the drastic improvement in its mechanical properties. It exhibits fewer incidences of fracture and chipping of the prostheses, and has greater bulk of material than metal-ceramic crowns and zirconia-veneered ceramics. Moreover, highly translucent monolithic zirconia is also available in the market, and its application is gradually increasing for anterior tooth rehabilitation. The present report describes a patient who underwent full-mouth rehabilitation with fixed dental prostheses (eight upper and three lower implant placements). All teeth, except bilateral mandibular canines and left mandibular first and second premolars, were extracted after the diagnosis of generalized chronic moderate-to-advanced periodontitis of the remaining teeth. The patient reported satisfactory esthetic and functional outcomes during the one-year follow-up visit.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.1
• /
• pp.18-23
• /
• 2019

Patients with cleft lip and palate have several problems such as oro-nasal communication, dental cross-bite caused by the insufficient growth of maxilla, poor pronunciation and esthetic problem. Removable denture with maxillary double crown near cleft palate and with clasp in the posterior teeth was used to solve the problems of the patient with cleft lip and plate. Double crowns make up for the insufficient mucosal support caused by the mucosa and alveolar bone loss in cleft lip and palate. Double crowns also allow easy repair of denture in case of abutment teeth extraction. In this case, 55-year-old female patient had bilateral cleft lip and palate and few remaining teeth on anterior maxilla. Prosthetic treatment was done for patient with bilateral cleft lip and palate to close oro-nasal communication using maxillary double crown and clasp retained removable denture. As a result, oro-nasal communication was effectively closed and the cross-bite was easily corrected by double crown and clasp retained denture. In addition, pronunciation and appearance were also improved.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.160-167
• /
• 2022

One of the treatment options for edentulous state patients with residual ridge resorption is implant overdenture using milled bar and attachment. It not only provides improved retention and stability but can also reduce the coverage of palatal surface. In addition, when a small number of implants are used, milled bar has the effect of being splinted between implant fixtures, which makes it mechanically advantageous under functions such as mastication. The patient in this case was a maxillary edentulous state patient with a considerable amount of residual alveolar bone resorption after removing the existing failed implants. Three implants were planted on both sides and an implant overdenture was fabricated using milled bar and ADD-TOC attachment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.4
• /
• pp.362-373
• /
• 2022

For a full-mouth fixed prosthetic treatment of the edentulous patient, it is essential to confirm the proper tooth position and thorough evaluation of the remaining alveolar bone and soft tissue before surgery. CAD-CAM dentistry and guided implant surgery have such advantages of providing simultaneous planning of surgery and prosthetic treatment to ensure pre-knowledge of the treatment. In this clinical case, using the digital technology, digital temporary denture fabrication, esthetic evaluation before fixed prostheses treatment, and guided surgery planning was possible. After the surgery, previously obtained data was used for fabricating fixed temporary prostheses. Definitive zirconia prostheses transferred from the provisional prostheses were fabricated and functionally and esthetically satisfying results were obtained.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.367-378
• /
• 2023

With the recent development of computer-aided design-computer-aided manufacturing technology and 3D printing technology, and the introduction of various digital techniques, the accuracy and efficiency of top-down definitive prosthetic restoration are increasing. In this clinical case, stable occlusion support was obtained through the placement of a total of 9 maxillary and mandibular posterior implants in patient with anterior-posterior crossed occlusion. The edentulous area of the maxillary anterior teeth, which showed a tendency of high resorption of the residual alveolar bone, was restored with a Kennedy Class IV implant assisted removable partial denture to restore soft tissue esthetics. Computed tomography guided surgery was used to place implants in the planned position, double scan technique was used to reflect the stabilized occlusion in the interim restoration stage to the definitive prostheses, and metal 3D printing was used to manufacture the coping and framework. This clinical case reports that efficient and predictable top-down full mouth rehabilitation was achieved using various digital technologies and techniques.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.316-327
• /
• 2023

In the case of fully edentulous patients with severe alveolar bone resorption, the consideration of 'All-on-X' implant-supported fixed prosthesis after placing four or more implants in the anterior maxilla is possible. Recent advancements in digital dentistry have enabled systematic and predictable treatment in all phases, including diagnosis, surgery, and prosthesis fabrication. By incorporating digital dentistry techniques such as digital complete denture, implant surgical guides, facial scanning into the conventional restoration process, it is possible to reduce the complexity of the prosthesis fabrication and effectively achieve the transition from provisional prosthesis to definitive prosthesis in terms of both aesthetics and function.

• Archives of Craniofacial Surgery
• /
• v.25 no.2
• /
• pp.62-70
• /
• 2024

Background: The management of cleft lip and palate aims at improving the patient's aesthetic and functional outcomes. Delaying primary repair can disrupt the patient's functional status. Long-term follow-up is essential to evaluate the need for secondary repair or revision surgery. This article presents the epidemiology of cleft lip and palate, including comprehensive patient characteristics, the extent of delay, and secondary repair at our institutional center, the Bandung Cleft Lip and Palate Center, Faculty of Medicine, Universitas Padjadjaran, Bandung, Indonesia. Methods: This retrospective study aimed to determine the epidemiology and recurrence rates of cleft lip and palate at the Bandung Cleft Lip and Palate Center, Indonesia, from January 2007 to December 2021. The inclusion criteria were patients diagnosed with cleft lip and/or palate. Procedures such as labioplasty, palatoplasty, secondary lip and nasal repair, and alveolar bone grafting were performed, and data on recurrence were available. Results: In total, there were 3,618 patients with cleft lip and palate, with an age range of 12 months to 67 years. The mean age was 4.33 years, and the median age was 1.35 years. Males predominated over females in all cleft types (60.4%), and the cleft lip was on the left side in 1,677 patients (46.4%). Most cases were unilateral (2,531; 70.0%) and complete (2,349; 64.9%), and involved a diagnosis of cleft lip and palate (1,981; 54.8%). Conclusion: Delayed primary labioplasty can affect daily functioning. Primary repair for patients with cleft lip and palate may be postponed due to limited awareness, socioeconomic factors, inadequate facilities, and varying adherence to treatment guidelines. Despite variations in the timing of primary cleft lip repair (not adhering to the recommended protocol), only 10% of these patients undergo reoperation. Healthcare providers should prioritize the importance of the ideal timing for primary repair in order to optimize physiological function without compromising the aesthetic results.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.4
• /
• pp.267-275
• /
• 2023

To obtain better esthetic results when immediately placing a dental implant, the soft tissue surrounding the implant must be conditioned during healing of the extraction socket. To this end, the emergence profile can be customized through immediate restoration of the provisional prosthesis, and good clinical results can be obtained at the time of definitive restoration in the future, resulting in high patient satisfaction. In this case, horizontal root fracture occurred after trauma to both maxillary central incisors. Immediate implant placement and loading was planned considering aesthetics and alveolar bone condition. By taking an impression using a digital intraoral scanner, a digital diagnostic wax-up was performed to make a more aesthetic prosthesis without applying external force to the traumatized teeth. Based on this, the ideal placement location was determined and immediate implant placement was performed using a 3D printed surgical guide. The provisional prosthesis was restored 5 days after placement, and the definitive zirconia crown was restored through soft tissue conditioning and customization using the shape of the provisional prosthesis for 3 months.

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.335-347
• /
• 1997

Vitamin D is known to exert its action by activating DNA and RBA within target cells to produce proteins and enzymes that can be used in bone resorption process. Particularly, the active form of vitmain D, 1,25-dihydroxycholecalciferol $[1,25-(OH)_2D_3]$, is considered to be one of the most potent stimulators of osteoclatic acitivity in vitro. The purpose of this study was to evaluate the effect of 1,25-Dihydroxyvitamin $D_3$ on the avtivity of periodotal ligament cells and, the experimental tooth movement. Human periodontal ligament cells were collected from the first premolar tooth extracted for the orthodontic treatment, and were incubated in the environment of $37^{\circ}C$, 5% $CO_2$ and 95% humidity. Microtitration(MIT) assay was done at 10, 25, 50 and 100ng/ml of 1,25-Dihydroxyvitamin $D_3$. 21 Sprague-Daft rats were divided into a control gmup(3), and experimental groups(18) where 100g of force from helical spring was applied across the maxillary incisors 1,25-Dihydroxyvitamin $D_3$ was injected into periodontal ligament at the mesial or distal surface of maxillary incisors so that we can compare the control side and the experimental side. Expreimental groups were sac rifled at 12, 24, 36, 48, 72hours and 7 days after force application, respectively. And the obtained tissues were evaluated histologically. The observed results were as follows. 1. The activity of periodontal ligament cells in l0ng/ml or 25ng/ml of 1,25-Dihydroxyvitamin $D_3$ 1,25-Dihydroxyvitamin $D_3$ was not significantly different to the control at the cultivation of 1, 2 and 3 days. 2. The activity of periodontal ligament cells was significantly increased at 3 days in 50 ng/ml of 1,25-Dihydroxyvitamin $D_3$ and 2, 3 days in 100g/ml of 1,25-Dihydroxyvitamin $D_3$. 3. Up to 7 days after force application, there was no difference in osteoblastic activity, tearing of periodontal ligament and proliferation of capillary at tension side between 1,25-Dihydroxyvitamin $D_3$ injection side and the control side. 4. The osteoclastic activity and the resorption of alveolar bone was greater in 1,25-Dihydroxyvitamin $D_3$ injection side than the control side at 36 hours after force application.

• The korean journal of orthodontics
• /
• v.31 no.5 s.88
• /
• pp.517-523
• /
• 2001

Titanium miniscrews we being used increasingly as an anchorage for tooth movement, because they ate easy to place and to remove, increase the number of sites available, give minimum strain to patients regarding surgical procedures, and offer uneventful healing alter removal. The use of titanium miniscrews as an orthodontic anchorage has been reported in clinical case reports, but clinicians have experienced screw loosening when using such screws.' To our knowledge, there are no published reports evaluating the stability of miniscrews. Information about the length of miniscrews used in relation to the location is of some importance, as stability will vary depending on bone duality The purpose of this study was to evaluate a variety of Lengths of miniscrews (dimeter: 2mm) which were inserted in maxilla or mandible and to demonstrate in a dog model which miniscrew provides fundamental stability in the jaws. 10 mm long miniscrews in the maxilla and 8mm long: miniscrews in the mandible showed no clinical mobility and retained their position throughout an 8 weeks force (200g) application. The mucosal condition around the screws was healthy in cases in which miniserews were inserted in the alveolar bone between the roots and the head of the screws emerged into the attached gingiva. When the force application was terminated, radiographic analysis revealed neither rent resorption not periodontal pathology around the miniscrews that remained stable during the entire treatment period. This study suggests that if titanium miniscrews with adequate length are properly used depending on the location, they provide sufficient stability for orthodontic anchorage.