• The Journal of Advanced Prosthodontics
• /
• 제10권3호
• /
• pp.205-210
• /
• 2018

PURPOSE. The purpose of this study was to evaluate the efficiency of a gas-phase fluorination method under different fluorination periods through using two resin cements. MATERIALS AND METHODS. 84 zirconia specimens in dimensions of $5mm{\times}5mm{\times}2mm$ were prepared and surface treated with $50{\mu}m$ aluminum oxide particles or gas phase fluorination for 2 min, 5 min, or 10 min. One specimen in each group was surface analyzed under scanning electron microscope. The remaining specimens were bonded to composite cylinders in dimensions of 2 mm diameter and 3 mm high with Panavia SA Plus or Variolink N. Then, the specimens were stored in $37^{\circ}C$ distilled water for 24 hours and shear bond strength test was applied at a speed of 1 mm/min. RESULTS. The highest shear bond strength values were observed in the samples fluorinated for 5 minutes and cemented with Panavia SA Plus. Variolink N did not elicit any statistical differences between surface treatments. Panavia SA Plus resin cement and Variolink N resin cements featured statistically significant difference in shear bond strength values only in the case of 5 minutes of fluorination treatment. CONCLUSION. According to the results of this study, application of 5 minutes of fluorination with 10-methacryloyloxydecyl dihydrogen phosphate monomer (MDP) containing Panavia SA Plus resin cement increased the resin bond strength of zirconia. Fluorination of the zirconia surface using conventional resin cement, Variolink N, did not lead to an increase in bond strength.

• 한국군사과학기술학회지
• /
• 제27권2호
• /
• pp.304-310
• /
• 2024

Ricin is a highly toxic protein which is produced in the seeds of the castor oil plant. Ricin toxin A chain has ribosomal RNA N-glycosylase activity that irreversibly hydrolyses the N-glycosidic bond of the adenine residue at position 4324 within the 28S rRNA. In this study, we developed non-toxic recombinant ricin vaccine(R51) in E. coli expression system, and evaluated efficacy of the R51 according to adjuvants. When the R51 was administered using aluminum hydroxide as an adjuvant, the vaccine efficacy was higher than that of TLR agonists or aluminum phosphate. Because it is time-consuming to administer the vaccine three times at three-week intervals, we investigated the survival rate and antibody titer of mice according to the change of time interval of vaccination. Interestingly, there was no difference in survival rate and antibody titer when R51 was administered at 0, 1, and 3 weeks or 0, 2, and 4 weeks compared to when administered at 0, 3, and 6 weeks. Therefore, the developed R51 vaccine is promising to protect soldiers from Ricin attack.

• 자원리싸이클링
• /
• 제15권5호
• /
• pp.3-10
• /
• 2006

자동차 폐촉매의 침출액으로부터 백금족 금속의 분리를 위하여 용매추출에 대한 기초연구가 수행되었다. 추출제로 tri-n-butyl phosphate (TBP), tri-n-octylamine (TOA) 그리고 di-n-hexyl sulfide (DHS)를 등유에 희석하여 사용하였다. 추출제의 종류 및 농도가 백금, 팔라듐 그리고 로듐의 추출거동에 미치는 영향을 조사하였다. 또한 세륨, 납, 철, 마그네슘 그리고 알루미늄 등 침출액에 존재하는 주요 금속불순물의 추출거동도 함께 조사하였다. TBP는 백금과 팔라듐, 그리고 TOA는 백금, 팔라듐, 로듐을 동시에 추출하였다. DHS 추출제인 SFI-6에 의한 용매추출 시 백금이 팔라듐과 함께 유기상으로 추출되었으나, SFI-6R은 팔라듐만 선택적으로 추출하였다. SFI-6R은 SFI-6에 비하여 팔라듐에 대한 선택성이 우수하였으나 추출속도가 느렸다. 추출제의 종류에 따라 백금족 금속과 함께 추출되는 금속불순물들이 달라지며 세정 또는 탈거공정에서 이들을 제거하여야 한다. 자동차 폐촉매의 침출액으로부터 백금, 팔라듐 그리고 로듐을 분리하기 위하여 먼저 DHS 추출제인 SFI-6R를 사용하여 팔라듐을 분리한 다음 TBP 또는 TOA으로 백금을 추출하여 로듐과 분리하는 공정이 적절한 것으로 나타났다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.70.1-70.1
• /
• 2018

자동차를 포함한 수송기기, 전기 및 전자산업에 있어 경량화, 소형화, 고성능화와 함께 에너지 및 원가절감을 위한 노력이 활발하게 이루어지고 있다. 알루미늄은 신소재 및 고효율 제조공정 개발을 위한 합금설계기술, 용해/주조 기술, 가공기술, 열처리 기술, 시험평가 기술, 시뮬레이션 기술에 대한 전방위적인 연구가 진행되고 있다. 최근 프리미엄 자동차 시장에 고강도 알루미늄을 이용한 휠 시장이 폭발적으로 증가하고 있다. 2010년 전세계 자동차 휠 시장 규모는 56조원으로 알루미늄 휠 시장 규모는 약 19조원으로 점차 증가하고 있으며, CO2 배출 및 연비 증가에 대한 시대적 요구에 의해 수송기기의 경량화 및 주행 성능 향상으로 알루미늄 휠 시장 규모는 해마다 증가하고 있다. 7xxx 계열의 알루미늄 합금을 이용해 PEO (Plasma Electrolytic Oxidation) 혹은 MAO (Micro Arc Oxidation)를 이용해 표면처리를 수행하였다. 표면처리는 Silicate, Vanadate 및 Phosphate 등의 전해액을 선택적으로 사용하였으며, AC 200 ~ 500 V의 전압 조건 범위에서 CV 모드로 전류를 인가하였다. 형성된 표면 산화층은 산화막 두께 분석, 내마모 특성 평가, 염수분무 평가, 전기화학 평가(Potentiodynamic Polarization) 등을 통해 표면 산화층 분석을 진행하였다.

• 한국세라믹학회지
• /
• 제53권6호
• /
• pp.700-706
• /
• 2016

Etch rate, surface roughness and microstructure as plasma resistance were evaluated for six kinds of oxide glass with different compositions. Borosilicate glass (BS) was found to be etched at the highest etch rate and zinc aluminum phosphate glass (ZAP) showed a relatively lower etch rate than borosilicate. On the other hand, the etching rate of calcium aluminosilicate glass (CAS) was measured to be similar to that of sintered alumina while yttrium aluminosilicate glass (YAS) showed the lowest etch rate. Such different etch rates by mixture plasma as a function of glass compositions was dependent on whether or not fluoride compounds were formed on glass and sublimated in high vacuum. Especially, in view that $CaF_2$ and $YF_3$ with high sublimation points were formed on the surface of CAS and YAS glasses, both CAS and YAS glasses were considered to be a good candidate for protective coating materials on the damaged polycrystalline ceramics parts in semi-conductor and display processes.

• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.2979-2983
• /
• 2009

Nanowires of polytetrakis(o-aminophenyl)porphyrin (PTAPPNW) were fabricated by electrochemical polymerization with the cyclic voltammetric method in anodic aluminum oxide (AAO) membranes. The glassy carbon electrode (GCE) modified by PTAPPNW, single-walled carbon nanotubes (SWNT) and Nafion as a binder was investigated with voltammetric methods in a phosphate buffer saline (PBS) solution at pH 7.4. The PTAPPNW + SWNT + Nafion/GCE exhibited strongly enhanced voltammetric and amperometric sensitivity towards hydrogen peroxide ($H_2O_2$), which shortened the response time and enhanced the sensitivity for $H_2O_2$ determination at an applied potential of 0.0 V by amperometric method. The PTAPPNW + SWNT + Nafion/GCE can be used to monitor $H_2O_2$ at very low concentrations in biological pH as an efficient electrochemical $H_2O_2$ sensor.

• Corrosion Science and Technology
• /
• 제20권4호
• /
• pp.175-182
• /
• 2021

Magnesium alloy is limited in the industrial field because its standard electrode potential is -2.363 V vs. NHE (Normal Hydrogen Electrode) at 25 ℃. This high electrochemical activity causes magnesium to quickly corrode with oxygen in air; chemical conversion coating prevents corrosion but causes surface defects like cracks and pores. We have examined the anti-corrosion effect of sol-gel coating sealed on the defected conversion coating layer. Sol-gel coatings produced higher voltage current and smaller pore than the chemical conversion coating layer. The conversion coating on magnesium alloy AZ31 was prepared using phosphate-permanganate solution. The sol-gel coating was designed using trimethoxymethylsilane (MTMS) and (3-Glycidyloxypropyl) trimethoxysilane (GPTMS) as precursors, and aluminum acetylacetonate as a ring-opening agent. The thermal shock resistance was tested by exposing specimens at 140 ℃ in a convection oven; the results showed changes in the magnesium alloy AZ31 surface, such as oxidization and cracking. Scanning electron microscope (FE-SEM) analysis confirmed a sealed sol-gel coating layer on magnesium alloy AZ31. Electrochemical impedance spectroscopy (EIS) measured the differences in corrosion protection properties by sol-gel and conversion coatings in 0.35 wt% NaCl solution, and the potentiodynamic polarization test and confirmed conversion coating with the sol-gel coating show significantly improved resistance by crack sealing.

• 한국산학기술학회논문지
• /
• 제19권8호
• /
• pp.105-114
• /
• 2018

전기응집 (Electro-coagulation)을 활용한 분리 막 생물반응기 (Membrane Bio-Reactor) 공정의 막 오염 저감 현상을 확인하고 이를 해석하고자 하였다. 전기응집의 주요 운전 인자인 전류밀도와 접촉시간 변화가 활성슬러지 혼합액의 막 여과에 미치는 영향을 관찰하고 전기응집 과정에서 발생하는 수산화금속염이 막 오염에 미치는 역할에 대해 연구하였다. 전류밀도를 $10A/m^2$으로 높게 유지한 경우에는 전기응집 시간이 증가하여도 막 오염 감소 효과가 크지 않은 반면 $2.5A/m^2$의 낮은 전류밀도 하에서는 전기응집 시간이 증가하면 추가적인 막 오염 감소가 관찰되었다. 즉, 막 오염을 감소시키는 전류밀도와 접촉시간의 곱이 전체 막 오염 저감 정도를 지배하고 있음을 확인하였다. 또한 주어진 전류밀도와 인가시간에서 입도분포는 크게 변화하지 않은 것으로 나타나 콜로이드 입자와 막 오염 저감과는 큰 관련성이 없는 것으로 판단되었다. 그러나 전기응집을 통해 생성된 수산화알루미늄 (인산알루미늄)이 막 여과 과정에서 동적 막 (Dynamic Membrane)을 형성하여 막 오염 현상을 완화하는 것으로 확인되었다. 전기응집에서 발생한 수산화금속염이 막 표면에 동적 막을 형성하고 이로 인해 유입수의 입자성분이 직접 막 표면과 내부에 침적되는 것을 방해하고 동적 막에 주로 쌓이게 함으로써 막 오염이 감소된 것이다. 본 연구에서 밝힌 수산화금속염에 의한 동적 막의 역할은 전기응집을 활용한 MBR 공정의 후 막 오염 감소 메커니즘을 해석하는데 중요한 역할을 한다고 결론지을 수 있다.

• 한국토양비료학회지
• /
• 제7권3호
• /
• pp.127-135
• /
• 1974

The samples were taken from the following localities previously classified as "Akiochi" area: Yangpyung, Puchun, and Pyungtaik, all of Kyonggi-do province. Five soil profiles were described in the field, and taken to the laboratory for physical and chemical analysis and mineralogical analysis by X-ray diffraction. The predominant clay minerals consist mainly of illite, vermiculite, chlorites and intergrade with vermiculite, and kaolinite. Illite or mica was found present in all samples and in all horizons. This was identified by the 9.83 to $10{\AA}$ (0.01) and $3.32{\AA}$ (003) basal reflections, Interhorizontal variations in mineral content and crystallinity are illustrated in their respective Xray diffractogram. Comparing the peak intensity, of the $14{\AA}$, $10{\AA}$ and $7{\AA}$ indicated the degree of weathering from the surface to the lower horizons. In general, the weathering of illite on the surface produced less pronounced $10{\AA}$ and $14{\AA}$ peak as compared to the lower horizons. The same may be said with kaolinite. On K-saturation, the $14{\AA}$ peak broadening on the low angle side was observed. This is interpreted to be due to chlorization. Heat treament from $100^{\circ}C$, $200^{\circ}C$, $400^{\circ}C$, $600^{\circ}C$, and $800^{\circ}C$. caused significant changes in the different diffractograms. Heating caused collasped of the $14{\AA}$ to $10{\AA}$ and the appearance of scattered peaks between $10-14{\AA}$. This is interpreted to the presence of vermiculite chlorite intergradient. The complete collapse of the $14{\AA}$ at $800^{\circ}C$ to $10{\AA}$ with increased intensity was attributed to the preservce of vermiculite. The principal difference among the clay minerals in each horizon is the concomitant increase and decrease in intensity with depth of the $14{\AA}$, $10{\AA}$ and $7{\AA}$ diffraction spacings. Apparently the weathering of illite ($10{\AA}$) is resulting in the formation of vermiculite ($14{\AA}$) and the interstratified material being an intermediate stage and the beginning of the formation of vermiculite. Some broadening- in the 17 to $18{\AA}$ was observed in Puchun-1 Pyungtaik-1 and Pyungtaik-2 specially so in the lower horizon in the Ca or Mg-saturated sample. Heated treatment tend to shift this peak to $14{\AA}$ indicating the presence of regular layering of the interstratified complex. The high amount of extractable aluminum and iron coupled with low exchange capacity indicate that iron and aluminum plays an important role in the weathering of these soils and is responsible to the low exchange capacity, high acidity and high phosphate absorptive capacity. The results presented substantiated the weathering sequence of Jackson in that mica ${\rightarrow}$ vermiculite ${\rightarrow}$ chloritezed vermiculite ${\rightarrow}$ kaolinite.

• 한국토양비료학회지
• /
• 제17권2호
• /
• pp.167-172
• /
• 1984

제주도(濟州道) 화산회토(火山灰土)에서 감귤원(紺橘園)의 경작년대(耕作年代)에 따른 Al 함량(含量) 변화(變化)를 검토(檢討)하고, Al 함량(含量) 변화(變化)에 영향을 끼치는 요인(要因)들에 관하여 고찰(考察)한 결과(結果)는 다음과 같다. 1. 활성(活性) Al 함량(含量)이 매우 높았는데, 심토(深土)에서 특(特)히 높았다. 그러나 치환성(置換性) Al 함량(含量)은 비교적(比較的) 낮아 활성(活性) Al 함량(含量)의 1/10 정도에 불과(不過)하였다. 2. 감귤원(柑橘園)의 경작년대(耕作年代)가 오래될수록 pH가 증가(增加)함에 따라 치환성(置換性) Al 함량(含量)이 감소(減少)되었다. 3. 감귤원(柑橘園)의 경작년대(耕作年代)가 오래될수록 활성(活性) Al 함량(含量)도 현저하게 감소(減少)되고 있는데, 이는 주(主)로 인산비료(燐酸肥料)의 다량(多量) 시용(施用)에 의(依)해 Al 활성(活性)이 감소(減少)되었기 때문이다. 4. 유효인산(有效燐酸) 함량(含量)이 극(極)히 낮은 심토(深土)에서는 활성(活性) Al이 유기물(有機物) 함량(含量) 및 pH(NaF)와 고도(高度)로 유의(有意)한 상관을 보였으나, 유효인산(有效燐酸) 함량(含量)이 높은 표토(表土)에서는 상관이 낮았다. 이에서 수산화물(水酸化物)의 형태(形態)로 존재(存在)하고 있는 Al이 활성(活性) Al으로 침출(浸出)되고, 인산비료(燐酸肥料)를 시용(施用)하였 때 활성(活性) Al이 시용(施用) 인산(燐酸)과 반응(反應)하여 불용화(不溶化)됨을 알 수 있다.