• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.379-382
• /
• 2017

Flow characteristics of dual bell nozzle with pintle were investigated. Thrust and thrust coefficient were compared with the pintle-bell nozzle of the same condition, and difference according to the pintle stroke was investigated. At stroke 0 mm, the thrust of the dual bell nozzle was about 13.18% higher than the bell nozzle, and when the pintle was backward, it was similar to the bell nozzle. The change in expansion ratio with stroke was considered to be more advantageous for a dual bell nozzle that performs altitude compensation through separation and transition.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.1
• /
• pp.38-43
• /
• 2009

In this paper. a prototype of a mobile Sun tracking system is proposed. The proposed system uses 2-axis tilt sensor and 3-axis magnetic sensor to measure the orientation and the posture of the system according to the horizontal system of coordinates, which are used to compensate the slope effects. Then through astronomical calculation using the time and position information obtained by GPS sensor the azimuth and altitude of the Sun from that location is calculated. The position of the Sun is converted to that of the mobile Sun tracking system coordinates and used to control A-axis and C-axis of the system.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.1
• /
• pp.80-91
• /
• 2001

The purpose of this research is to provide a basic knowledge to open up for undeveloped park in process of the park policy establishment by setting up the priority of park development and valuation factor, valuation index as well as building a basic material to undeveloped neighborhood park in Daegu Metropolitan City. Thirteen urban neighborhood parks(1,841,663$m^2$) in the Daegu Metropolitan City were selected for this study. Analyzing and reviewing the previous research and literature review were conducted, and the evaluation index and analysis criteria were constructed to decide the development priority of parks. The results of this research are as follows; 1) Following to the result of the expert questionnaire test in order to estimate weight of valuation factors. It had a high score in available population, and estimated amount of the gross compensation, unpurchased land rate. On the other hand park rate of autonomous district, altitude, rate of population increase in autonomous district and a low score. 2) Generally, most f the plain type parks had a high score in the Sea level, land using pattern, an estimated amount of the gross compensation, but hill type parks had a high score the rate of green covered, park area for one person of administration building. 3) Daebong, Soosung, Dosan, 2.28 youth, Kyungnam parks were selected high priority. Soochang, Donsibong, Janggi, Dongin parks were selected middle priority. Bokhyun, Galsan, Manchon, Gusoosan parks, which were selected low priority. This research for undeveloped park is a basic research step to open up. Three many difficult things in shortage of the basic material for building valuation factor and measuring of the method measurement. The application of weight which make a decision importance among the valuation factor should have ore reasonable study and more scientific research from now because there still remains a lot of shortage of positive materials in there.

• Journal of the Korean Society of Safety
• /
• v.23 no.2
• /
• pp.51-56
• /
• 2008

In these days, work-related musculoskeletal disorders(WMSDs) is one of the issues in the shipbuilding industry. As the number of injured workers and demands for worker's compensation have rapidly increased, improvement of work conditions and environments to prevent WMSDs has been more demanded. To reduce WMSDs' hazards in the shipbuilding industry, simulation technique which showed it's ability of increasing the manufacturing productivity was applied, because simulation technique has the evaluation ability for a worker's danger level of production process by RULA(Rapid Upper Limb Assesment). In this research, worker's altitude had modeled and worker's action has simulated. After the caution level was evaluated, we pointed out clues which had high workload. To reduce work-load, we applied ergonomic principles for improving working conditions and environments. Improved working conditions and environments were simulated using human modelling and simulation and their workload were evaluated again.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.519-525
• /
• 2011

High-resolution earth-observing satellites acquire substantial amount of geospatial images. In addition to high image quality, high-resolution satellite images (HRSI) provide unprecedented direct georegistration accuracy, which have been enabled by accurate orbit determination technology. Direct georegistration is carried out by relating the determined position and attitude of camera to the ground target, i.e., projecting an image point to the earth ellipsoid using the collinearity equation. However, the apparent position of ground target is displaced due to the atmosphere and satellite velocity causing significant georegistration bias. In other words, optic ray from the earth surface to satellite cameras at 400~900km altitude refracts due to the thick atmosphere which is called atmospheric refraction. Velocity aberration is caused by high traveling speed of earth-observing satellites, approximately 7.7 km/s, relative to the earth surface. These effects should be compensated for accurate direct georegistration of HRSI. Therefore, this study presents the equation and the compensation procedure of atmospheric refraction and velocity aberration. Then, the effects are simulated at different image acquisition geometry to present how much bias is introduced. Finally, these effects are evaluated for Quickbird and WorldView-1 based on the physical sensor model.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.9 no.2
• /
• pp.276-287
• /
• 2003

The purpose of this study is to examine the impact of social voluntary activity on the identity of women's college students. universities are functionally constituted by teaching, researching and social service. Data for analysis are collected 439 students at K women's college in other to examine research questions, t-test and regression test. The results of this analysis are as follows : First, There was any gap in self-esteem, morality and social welfare ideology between the college students who had ever experienced social voluntary activity and who had not. Second, The personal characteristics did not give an impact, but their satisfaction was under the influence of institutional support for supervision and altitude of themselves for social service, which were part of the institution characteristics. Third, The social service effectiveness was not affected by the personal characteristics, except influenced by the instituitional characteristits such as degree of compensation an influence on self-esteem. also social welfare and morality were not affected. Fourth, There was any gap in self-esteem, morality and social welfare ideology between the impact of service satisfaction on service effectiveness.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.411-414
• /
• 2008

In this paper a novel tracking system is described, regarding the influence of shadow between array, aimed at improving the efficiency of PV tracking system. The loss by influence of those shadow can be compensated for by means of control algorithm of the tracking device. The paper suggests a method controlling an altitude for length which is received the shadow influence of PV array. By using an azimuth of current solar position and the length between arrays, the controller of tracking device is able to calculate the length between actual arrays and make a comparison of the shadow length at a specific time with the length between arrays. In the paper, we develop the control algorithm able to minimize the loss caused by the influence of shadow on the PV tracking system, and compared this with conventional output system. The controller has been tested in the laboratory with proposed algorithm and shows excellent performance

• Current Optics and Photonics
• /
• v.7 no.4
• /
• pp.435-442
• /
• 2023

These days, the size of a reflective telescope has been increasing for astronomical observation. An additional optical system usually assists a large ground telescope for image analysis or the compensation of air turbulence. To guide collimated light to the external optical system through a designated path, a coudé mirror is usually adopted. Including a collimator, a coudé mirror of a ground telescope is affected by gravity, depending on the telescope's pointing direction. The mirror surface is deformed by the weight of the mirror itself and its mount, which deteriorates the optical performance. In this research, we propose an optimization method for the coudé mirror assembly for a 1-m class ground telescope that minimizes the gravitational surface error (SFE). Here the mirror support positions and the sizes of the mount structure are optimized using finite element analysis and the response surface optimization method in both the horizontal and vertical directions, considering the telescope's altitude angle. Throughout the whole design process, the coefficients of the Zernike polynomials are calculated and their amplitude changes are monitored to determine the optimal design parameters. At the same time, the design budgets for the thermal SFE and the mass and size of the mount are reflected in the study.

• Korean Journal of Optics and Photonics
• /
• v.26 no.3
• /
• pp.155-161
• /
• 2015

We report the design and performance analysis of an off-axis three-mirror telescope as the fore optics for a new hyperspectral sensor aboard a small unmanned aerial vehicle (UAV), for low-altitude coastal remote sensing. The sensor needs to have at least 4 cm of spatial resolution at an operating altitude of 500 m, $4^{\circ}$ field of view (FOV), and a signal to noise ratio (SNR) of 100 at 660 nm. For these performance requirements, the sensor's optical design has an entrance pupil diameter of 70 mm and an F-ratio of 5.0. The fore optics is a three-mirror system, including aspheric primary and secondary mirrors. The optical performance is expected to reach $1/15{\lambda}$ in RMS wavefront error and 0.75 in MTF value at 660 nm. Considering the manufacturing and assembling phase, we determined the alignment compensation due to the tertiary mirror from the sensitivity, and derived the tilt-tolerance range to be 0.17 mrad. The off-axis three-mirror telescope, which has better performance than the fore optics of other hyperspectral sensors and is fitted for a small UAV, will contribute to ocean remote-sensing research.

• Korean Journal of Soil Science and Fertilizer
• /
• v.14 no.4
• /
• pp.224-229
• /
• 1982

Effects of light intensity and temperature on photosynthesis and respiration of autogenous wild SUMBODY plants, Dystaenia takesimana, known as a prospective source of forage in Ulleung island, Korea, were investigated. Results were as follows : 1. Light saturation point at $20^{\circ}C$ was 34 to 38 klux and light compensation point was 4 to 6 klux. Apparent photosynthetic rate at light saturation was 9 to 12 mg $CO_2/dm^2/hr$. 2. Optimum temperature for photosynthesis was $20^{\circ}C$ and $Q_{10}$ values of two temperature ranges, 20 to $30^{\circ}C$ and 30 to $40^{\circ}C$, were 0.8 and 0.9 for photosynthesis, while $Q_{10}$ for respiration were 1.6 and 1.7. 3. Native plants sampled in area of higher altitude had a higher apparent photosynthtic rate at lower temperature and the plants sampled in area of mixed with bushes had lower a light compensation point. These rusults suggest that the Inland weather condition of Korea during spring and fall seasons might be. suitable for the SUMBODY growth but inadequate during summer.