• Journal of Korean Society on Water Environment
• /
• v.21 no.1
• /
• pp.7-13
• /
• 2005

With the appearance of pathogenic microorganisms, which were resistant to free chlorine, the significant attention to the necessity of powerful alternative disinfection methods such as ozone, chlorine dioxide, LTV irradiation to inactivating pathogens has been increased in water treatment. Among these alternative disinfection methods, ozone is well known as strong biocidal method and the usage of ozone is also increasing in Korea. However, in Korea, there has been no report on the quantitative study of Cryptosporidium parvum with ozone and its evaluation in advanced drinking water treatments. This study reports on the methodology for predicting the ozone inactivation of Cryptosporidium parvum by ozone disinfection in advanced drinking water treatment. The method is based on the fact that a specific inactivation level of microorganisms is achieved at a unique value of ozone exposures, independent of ozone dose and type of water, and quantitatively described by a delayed Chick-Watson model. The required values ${\bar{C}}T$ for 2 log inactivation of Cryptosporidium parvum was $6.0mg/L{\cdot}min$ and $15.5mg/L{\cdot}min$ at $20^{\circ}C$ and $5^{\circ}C$, respectively. From this obtained Cryptosporidium parvum inactivation curves and calculated ${\bar{C}}T$ values of advanced drinking water treatment water in Korea with FIA (Flow injection alaysis), we can predict that water treatment plant can achieve a 1.1~1.8 log inactivation and 0~0.4 log inactivation at $20^{\circ}C$ and $5^{\circ}C$, respectively. This methodology will be useful for drinking water treatment plants which intend to evaluate the disinfection efficiencies of their ozonation process without full scale test and direct experiments with Cryptosporidium parvum.

• Transactions of Materials Processing
• /
• v.25 no.1
• /
• pp.36-42
• /
• 2016

Fiber metal laminates (FMLs) are well known for improved fatigue strength, better impact resistance, superior damage tolerance and slow crack growth rate compared to traditional metallic materials. However, defects and loss of strength of a composite material can occur due to the vertical load from the punch during the joining with a dissimilar material using a conventional clinching method. In the current study, tapered-hole clinching was an alternative process used to join Al 5052 and FMLs. The tapered hole was formed in the FML before the joining. For the better understanding of static and dynamic characteristics, a clinched joining followed by a tensile-shear test was numerically simulated using the finite element analysis. The design parameters were also evaluated for the geometry of the tapered hole by the Taguchi method in order to improve and compare the lateral joining strength of the clinched joint. The influence of the neck thickness and the undercut were evaluated and the contribution of each design parameter was determined. Then, actual experiments for the joining and tensile-shear test were conducted to verify the results of the numerical simulations. In conclusion, the appropriate combination of the design parameters can improve the joining strength and the cross-sections of the tapered-hole clinched joint formed in the actual experiments were in good agreement with the results of the numerical simulations.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.5
• /
• pp.351-360
• /
• 2020

Of late, demand for test sites for marine equipment such as ASV, AUV, ROV, and various underwater sensors is increasing. The authors have focused on an oscillating water column (OWC), which is being constructed near Chagwido Island Jeju, as one of the test-sites. The main objective of the OWC is to produce wave energy and develop technologies. It has been built in the sea approximately 1 km off the coast. It has berth accommodation and some rooms that can be used as laboratories. To investigate the feasibility of its usage as a test site for marine equipment, we acquired bathymetric data around the OWC by using a multi-beam echo sounder and a single-beam scanning sonar. The accessibility of the OWC from nearby ports and the use of support vessels or ships were also investigated. 3D point cloud data from the multi-beam echo sounder and 2D acoustic images from the scanning sonar are expected to be used as references for identifying changes over time. In addition, through these experiments, we derived a procedure to use this facility as a test site by using the IDEF0 functional modelling method. Based on this preliminary investigation and previously reported examples, we determined the general conditions and preferences for evaluating the performance of various marine equipment heuristically. Finally, we developed five applications that were derived from this investigation.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.4
• /
• pp.367-373
• /
• 2014

The most common current controller for the Switched Reluctance Motor (SRM) is the hysteresis controller. This method, however, suffers from such drawbacks as variable switching frequency, consequent audible noise and high current ripple. These disadvantages make this controlling method undesirable for many applications. The alternative solution is the PI controller. Since the fixed gain PI current controller can only be optimized for one operating point, and on the other hand, SR motor is highly nonlinear, PI controller gain should be adjusted according to incremental inductance. This paper presents a novel method for PI current controller gain adaptation which is simple and yields a good performance. The proposed controller has been implemented on a test bench using a eZdsp F28335 board. The performance of the current controller has been investigated in both simulation and experimental tests using a four-phase 8/6 4KW SRM drive system.

• Analytical Science and Technology
• /
• v.33 no.4
• /
• pp.169-176
• /
• 2020

Separation of basic compounds using reverse phase chromatography on a silica-based stationary phase represents a major challenge, because of the interaction between the cationic sites of the basic compounds with the anionic silanols of the stationary phase. This study presents a simple, reliable, and organic solvent - free liquid chromatographic method for the determination of terbutaline and salbutamol, in which a room temperature ionic liquid (RTIL) is used as mobile phase additive. We investigated various mobile phase parameters affecting the retention of the two compounds, such as types and concentration of RTILs and, pH of the mobile phase were investigated. The developed method was validated according to International Conference on Harmonization (ICH) guidelines and successfully applied effectively to determine salbutamol sulfate in pharmaceutical preparations.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.4
• /
• pp.274-281
• /
• 2012

This paper proposed a control simulation method for design and verification of the transport system in an automobile assembly line based on digital manufacturing system. The design of the transport system involves two major activities: mechanical design (device specification) and electrical design (device behavior and system control). Conventionally, the simulation and emulation system of the transport system focuses on the abstract level, which mainly deals with design verification, alternative comparison, and system diagnosis. Although it can provide overall system visibility in monitoring how well it works in the process and view, its simulation models are not sufficiently realistic to be used for a detailed design or for implementation purposes. In this paper, a digital simulation model for a transport system in an automotive assembly line is constructed by adapting a digital manufacturing methodology. We use the concept of the "Virtual Probe", which transport a carrier instead of the belt of the conveyor. In conclusion, the proposed method is valuable in the process of test run in the shop floor. This method would reduce the time and effort for validating the manufacturing system and improve the productivity and integrity of the control program.

• Steel and Composite Structures
• /
• v.16 no.6
• /
• pp.657-679
• /
• 2014

This paper describes a series of compression tests performed on cold-formed steel channel sections with perforations in the web (thermal studs) fabricated from a galvanized steel plate whose thickness ranged from 1.0 mm to 1.6 mm and nominal yield stress was 295 MPa. The structural behavior and performance of thermal studs undergoing local, distortional, or flexural-torsional buckling were investigated experimentally and analytically. The compression tests indicate that the slits in the web had significant negative effects on the buckling and ultimate strength of thin-walled channel section columns. The compressive strength of perforated thermal studs was estimated using equivalent solid channel sections of reduced thickness instead of the studs. The direct strength method, a newly developed and adopted alternative to the effective width method for designing cold-formed steel sections in the AISI Standard S100 (2004) and AS/NZS 4600 (Standard Australia 2005), was calibrated to the test results for its application to cold-formed channel sections with slits in the web. The results verify that the DSM can predict the ultimate strength of channel section columns with slits in the web by substituting equivalent solid sections of reduced thickness for them.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.4
• /
• pp.247-252
• /
• 1999

In this paper, in order to investigate availability of the OW-PD measurement method which has been proposed as an alternative of AC-PD measurement method to an after laying test and/or diagnosis for the power cable system, partial discharges owing to the needle-type defect integrated into the cable have been measured using AC and OW(Oscillating Wave) voltages. In the AC-PD measurement, the magnitude, phase and pulse number of partial discharges have been changed with the duration of voltage application, which can be analyzed through the relation with the process of the electrical tree initiation and propagation. In addition, the characteristics of partial discharges using OW voltage are appeared to be similar to those in case of AC-PD measurement and to be different with the shapes of electrical tree. From these results, it is concluded that the OW-PD measurement method is available to the tests for the cable system.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.2
• /
• pp.98-109
• /
• 2004

The lower limit of detection, precision, setting method of target value, reportable range determination, recovery, linearity, and comparison study with another equipment was evaluated for the Toshiba-120FR chemistry autoanalyzer which was newly introduced at the Daejeon Veteran Hospital in Dec. 2003. Nineteen kinds of test for AST, ALT, ALP, LDH, GGT, TP, ALB, GLU, T-cho, T-bil, TG, UA, CAL, IP, AMY, HDL-C, LDL-C, Cre and BUN were performed to evaluate the lower limit of detection, precision, setting method of target value, reportable range determination, recovery, linearity, and comparison study with other equipment according to the NCCLS guidelines(EP5-A, EP6-P, EP9-A). The Toshiba-120FR autochemical analyzer showed good precision for all tested items. The data concerning the lower limit of detection, precision(total CV 0.47%~3.65%), setting method of target value, reportable range determination, recovery(93%~111%), linearity($R^2=0.997{\sim}0.999$), and comparison study(r=0.977~0.999) with other equipment was acceptable for all tested items. The results of evaluation for the Toshiba-120FR autochemical analyzer showed that this equipment could be used as an alternative to other equipment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.11
• /
• pp.1627-1637
• /
• 2002

The objective of this study is to analyze the images of basic bodice apparel displayed on the PC monitor connected to digital camera, and to suggest a more efficient alternative method that enables the expert judge to evaluate the subject both traditional method and displayed images on the computer. Appearance evaluation has traditionally been assessed using subjective method dependent upon expertjudges' senses with the naked eye after direct observation of a living model. This research faces the new challenge focusing on the sensory evaluation of appearance for basic apparel patterns, which can overcome the space and time limitations of the traditional feet methods. A total fifteen basic bodice garment (3 types of $pattern\;{\times}\;5$ subject) were constructed with same fabrics. The appearance evaluation items consist of lg questions of upper torso. The image takes font, back and side view of the dressed subject with three different situations. Data was analyzed using percentiles, standard deviation T-test and ANOVA. Taken together, the present result of appearance evaluation through digital camera image shows that there is a significant difference ($p{\leq}.001$) in the response to the placement of the neckline, the waist & shoulder dart, the general ease of the bust & waist area, the side seam, the perpendicular of the waist hem and general acceptability between the above three different situations; the image in the condition of greenish yellow background with front light showed the highest score through all questions. These results depend on the kind of background colors with the light.