• The korean journal of orthodontics
• /
• v.45 no.2
• /
• pp.82-88
• /
• 2015

Objective: The aim of this study was to evaluate the reliability of measurements obtained after the superimposition of three-dimensional (3D) digital models by comparing them with those obtained from lateral cephalometric radiographs and photocopies of plaster models for the evaluation of upper molar distalization. Methods: Data were collected from plaster models and lateral cephalometric radiographs of 20 Class II patients whose maxillary first molars were distalized with an intraoral distalizer. The posterior movements of the maxillary first molars were evaluated using lateral cephalometric radiographs (group CP), photocopies of plaster models (group PH), and digitized 3D models (group TD). Additionally, distalization and expansion of the other teeth and the degrees of molar rotation were measured in group PH and group TD and compared between the two groups. Results: No significant difference was observed regarding the amount of molar distalization among the three groups. A comparison of the aforementioned parameters between group PH and group TD did not reveal any significant difference. Conclusions: 3D digital models are reliable to assess the results of upper molar distalization and can be considered a valid alternative to conventional measurement methods.

• Biomedical Science Letters
• /
• v.13 no.4
• /
• pp.361-368
• /
• 2007

Biological samples can be fixed either by chemical method by using chemical solution or physical methods by using heat treatment. The problem in traditional heat fixation is unsatisfactory quality due to uneven heat conduction in specimen and loss of inner cell contents. Chemical fixation method also bears several intrinsic problems like the limit in specimen size, time consumption in fixative impregnation, and loss of low molecular weight cell components. These factors deteriorate the quality of fixed specimen, thus limit the magnification and contrast of tissue pictures. Microwave heat has been reported to be a good alternative to current chemical methods to overcome these problem. In this study, we tried to introduce the microwave energy method to routine fixation work in hospital. We replaced chemical fixative with saline to provide moderate reaction condition, and used frozen section to reduce time for sample preparation. Temperature was measured at each experiment. The fixation of rat kidney tissue with 2.45 GHz electromagnetic wave and saline showed similar result to the control group fixed with traditional chemical method. Human tumor tissue fixed with 2.45 GHz electromagnetic in frozen section was improved in terms of histochemistry of PAS and immunohistochemistry of tumor marker like cytokeratin. Total turnaround time was reduced from $24\sim38$ h to to $2\sim4$ h. In conclusion, the quality of samples prepared by microwave heating method was at least as good as that of traditional method. If the condition for the fixation of different specimens is standardized, this new method could be applied to routine work in hospital, and could save working time as well.

• Korean Journal of Oriental Medicine
• /
• v.14 no.2
• /
• pp.81-86
• /
• 2008

Objective: This study was aimed to review the recent trends of complementary medicine research in ICCMR 2008. Methods: Analyzed data include all researches of both oral and poster presentations in ICCMR. We classified presented researches according to their treatment method, nations, and targeted diseases. Results: In total, 338 researches were presented. In terms of methods, 68 basic researches, 98 clinical trials, 55 commentaries, 46 reviews, 71 trend analysis papers were classified. Herbal medicine was the most common treatment for research in ICCMR. And in terms of nation. Australia's announcement was the most in ICCMR. Lastly, cancer was the most focused theme in the conference. Conclusion: In the recent CAM research, cancer, depression and stress are the most targeted diseases since they are difficult to cure in modern medicine and since patients have high hopes to overcome their state by CAM. This review will help Korean doctors or scientists to systematically understand traditional medicine and to develop their researches.

• Journal of Information Technology Services
• /
• v.11 no.sup
• /
• pp.103-111
• /
• 2012

In epigraph field to study ancient scripts, alternative readability improvement technologies have been developed to replace existing rubbing method which has low resolution and causes surface pollution of heritages from the viewpoints of extraction process and used materials. Recently many methods which are based on analysis of pixel data for extracting outlines of the specific image have been developed with advancement of image processing techniques. But these methods are not applicable and the results are not satisfied in the damaged inscriptions which are weathered by wind and rain for a long time and in the narrowed one. In this paper laser scanning techniques which uses optical triangulation measurement principle are developed to minimize scanning error. The proposed techniques are consisted of 3 parts：(1) the understanding of optical triangulation measurement principle to find scanning guideline (2) determinations of points interval, scanning distance and scanning angle to guarantee scanning data quality (3) identification of valid point data area which will be used in registration process. The proposed character identification method contributed in decoding an ancient inscription on SeukBingGo in Kyungju.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.116-121
• /
• 2005

Immobilization technique by PVA encapsulation is an effective alternative for wastewater treatment. However little information is available about the effect of PVA characteristics on physical properties as an encapsulation media. This study aims at investigating the effect of the preparation methods of PVA and filler addition to media on the solubility of PVA. The solubility decreased as the freezing temperature decreased and the vacuum-drying was applied. Addition of the PAC (Powered Activated Carbon) and organoclay decreased the solubility of the PVA gels. Organoclay was more effective for lowering the solubility about 25% than the PAC. Nitrification with the PVA-coating media was less sufficient than with the polyurethane media due to the mass transfer restriction for oxygen and nutrients.

• Korean Journal of Food Science and Technology
• /
• v.17 no.4
• /
• pp.311-318
• /
• 1985

This review was intended to develop the sterilization method of spices by gamma irradiation and the results are summarized as follows. Microbial load of spices was different according to the kind of spices and the number was ranged from $10^{2}$-$10^{5}/g$ to $10^{7}$-$10^{8}/g$, gamma irradiation up to 4-10 kGy could decreased or sterilized to the microorganism of spices. In physicochemical properties of spices such as chemical components,essential oil and flavor, irradiated group with optimum dose was almost similar to the nonirradiated one, while fumigant treated group was remarkably deteriorated in the properties of spices compared with control, and free radicals produced by irradiation was disappeared during a few days storage. Irradiated spices should be an aptitude for good quality the storeability of processing food. Optimum dose irradiation below less than that proposed by FAO/IAEA/WHO Joint Committee and FDA was remarkably effect on the sterilization of spices and superior in wholesomeness and economic feasibiity compared with traditional methods. Irradiation might be an alternative to traditional sterilization methods of spices by fumigants such as ethylene oxide and ethylene dibromide because their treatments have been banned in U.S.A and other countries since 1982.

• Archives of Plastic Surgery
• /
• v.39 no.4
• /
• pp.404-410
• /
• 2012

Background First suggested by Brent in 1979, the pocket principle is an alternative method for patients for whom a microsurgical replantation is not feasible. We report the successful results of a modified palmar pocket method in adults. Methods Between 2004 and 2008, we treated 10 patients by nonmicrosurgical replantation using palmar pocketing. All patients were adults who sustained a complete fingertip amputation from the tip to lunula in a digits. In all of these patients, the amputation occurred due to a crush or avulsion-type injury, and a microsurgical replantation was not feasible. We used the palmar pocketing method following a composite graft in these patients and prepared the pocket in the subcutaneous layer of the ipsilateral palm. Results Of a total of 10 cases, nine had complete survival of the replantation and one had 20% partial necrosis. All of the cases were managed to conserve the fingernails, which led to acceptable cosmetic results. Conclusions A composite graft and palmar pocketing in adult cases of fingertip injury constitute a simple, reliable operation for digital amputation extending from the tip to the lunula. These methods had satisfactory results.

• Journal of Korean Society for Quality Management
• /
• v.34 no.4
• /
• pp.33-39
• /
• 2006

These days manufacture technology and manufacture environment are changing rapidly. By development of computer and enlargement of technique, most of manufacture field are computerized. In order to win international competition, it is important for companies how fast get the useful information from vast data. Statistical process control(SPC) techniques have been used as a problem solution tool at manufacturing process until present. However, these statistical methods are not applied more extensively because it has much restrictions in realistic problems. These statistical techniques have lots of problems when much data and factors are analyzed. In this paper, we proposed more practical and efficient a new statistical design technique which integrated data mining (DM) and statistical methods as alternative of problems. First step is selecting significant factor using DM feature selection algorithm from data of manufacturing process including many factors. Second step is finding optimum of process after estimating response function through response surface methodology(RSM) that is a statistical techniques

• Journal of Korean Society for Quality Management
• /
• v.44 no.3
• /
• pp.487-508
• /
• 2016

Purpose: Current testing method for drying rate used in military textiles has different results according to the public testing institute. So the purpose of this study was to suggest the alternative method which secure the reliability of the drying rate test. Methods: We measured the drying rate by various test methods for military clothes 14 species including quick drying function and compared the test results. Also, the collected data through the test was analyzed using one-way ANOVA. The p-value of results was compared by various testing institutions. Results: The results of this study are as follow; A deviation occurred among the testing institutions in original test method(KS K 0815). Whereas it is verified that there is no deviation among the institutions in 5% significance level by another test method(ISO 17617). Also it would increase work efficiency by reducing the testing time required to test by using ISO 17617. Conclusion: Based on the results, we can suggest the reliable test method of the drying rate.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.2
• /
• pp.184-194
• /
• 2016

In existing identification methods for on-orbit spacecraft, such as eigensystem realization algorithm (ERA) and subspace method identification (SMI), singular value decomposition (SVD) is used frequently to estimate the modal parameters. However, these identification methods are often used to process the linear time-invariant system, and there is a lower computation efficiency using the SVD when the system order of spacecraft is high. In this study, to improve the computational efficiency in identifying time-varying modal parameters of large spacecraft, a faster recursive algorithm called fast approximated power iteration (FAPI) is employed. This approach avoids the SVD and can be provided as an alternative spacecraft identification method, and the latest modal parameters obtained can be applied for updating the controller parameters timely (e.g. the self-adaptive control problem). In numerical simulations, two large flexible spacecraft models, the Engineering Test Satellite-VIII (ETS-VIII) and Soil Moisture Active/Passive (SMAP) satellite, are established. The identification results show that this recursive algorithm can obtain the time-varying modal parameters, and the computation time is reduced significantly.