• Journal of Information Processing Systems
• /
• v.20 no.4
• /
• pp.524-534
• /
• 2024

The release of relational data containing personal sensitive information poses a significant risk of privacy breaches. To preserve privacy while publishing such data, it is important to implement techniques that ensure protection of sensitive information. One popular technique used for this purpose is data perturbation, which is popularly used for privacy-preserving data release due to its simplicity and efficiency. However, the data perturbation has some limitations that prevent its practical application. As such, it is necessary to propose alternative solutions to overcome these limitations. In this study, we propose a novel approach to preserve privacy in the release of relational data containing personal sensitive information. This approach addresses an intuitive, syntactic privacy criterion for data perturbation and two perturbation methods for relational data release. Through experiments with synthetic and real data, we evaluate the performance of our methods.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.4
• /
• pp.496-500
• /
• 2007

Holstein cow ovaries obtained at a slaughterhouse were used to study the influence of the oocyte collection methods (slicing, puncture, aspiration I and II) on recovery efficiency and subsequent in vitro maturation and embryonic development competence of immature oocytes recovered. In the slicing method, the whole ovarian was chopped into small pieces with a surgical blade. In the puncture method, the whole ovarian surface was punctured by 18-g needle. In other 2 aspiration methods, collected oocytes by aspirating from the visible follicles using an 18-g needle attached to a 5 ml syringe (aspiration I) or using a constant negetive pressure (-80 mmHg) with a vacuum pump (aspiration II). The oocytes were classified into 4 classes on the basis of the morphology of cumulus cells and cytoplasmic appearance of oocyte. Slicing ($9.6{\pm}0.4$) and puncture ($9.7{\pm}0.4$)yielded a larger number of oocytes per ovary than other two aspiration methods (aspiration I and II were $5.8{\pm}0.3$and $5.6{\pm}0.4$, respectively) (p<0.05). The number of the highest quality oocytes (grade A) per ovary was significantly higher in slicing ($4.2{\pm}0.2$) and puncture ($4.6{\pm}0.1$) methods than in other methods (aspiration I and II were $1.2{\pm}0.2$ and $1.4{\pm}0.2$, respectively) (p<0.05). The rate of nuclear maturation of the highest and higher quality oocytes (grade A and grade B, respectively) was not affected by the oocytes collection methods. The oocytes collection methods also did not influence subsequent embryonic developmental competence after in vitro fertilization with M II stage oocytes. It is concluded that slicing and puncture methods of the ovaries can be used as an alternative techniques to aspiration by the syringe or vacuum pump.

• Journal of Christian Education in Korea
• /
• v.66
• /
• pp.343-382
• /
• 2021

This study is a case study in which the interactive non-face-to-face classes using Edutech were applied to the Department of Christian Education. The subjects were 20 students from the Christian education department of A University located in the metropolitan area. The course was 'Instructional Methods and Educational Technology' in the first semester of 2020. In theory, I studied non-face-to-face classes and interaction, and edutech and interaction. Afterward, it designed and developed interactive non-face-to-face classes using edutech. The interactive non-face-to-face classes using edutech were developed as a process of applying Flipped-PBL based interactive edutech. In addition, Edutech was selected for active interaction according to the Flipped-PBL process to be carried out in a non-face-to-face situation. In particular, in the process of developing the problem of PBL, it was built around the situation of the church. As a result of applying the class, first, learners showed high satisfaction and interest in the class. Second, positive transference appeared in the space of learning and the space of living. Third, interactive non-face-to-face classes using Edutech have generated active interaction. In particular, interactive edutech and learning methods have become the main factors enabling active interaction. Through this, learners have improved learning efficiency, immersion, and satisfaction. Also, as an alternative to face-to-face classes, I was able to experience online classes. In other words, the satisfaction and interest of learning, and the transference of learning space, were also possible through active interactions generated through learning methods using interactive Edutech used in class. Furthermore, disabilities in the online communication(Internet) environment and learners' unfamiliarity with the online environment have been found as factors that hinder learning satisfaction and interaction. During learning, obstacles to the online communication environment hinder the utilization of interactive Edutech, preventing active interactions from occurring. This results in diminishing satisfaction and interest in learning. Therefore, we find that designing interactive non-face-to-face classes using Edutech requires sufficient learner learning and checking of the online communication(Internet) environment in advance for Edutech and learning methods. In response, this study confirmed the possibility by applying interactive non-face-to-face classes using Edutech to Christian education classes as an alternative method of education that allows active interaction and consistent transference of learning and life. Although it is a case study with limited duration and limitations of the number of people, I would like to present the possibility as an alternative Christian education method of an era where the direction of online classes should be presented as an alternative to a face-to-face class.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.294-302
• /
• 2015

PURPOSE. The purpose of this study was to verify the clinical-feasibility of additive manufacturing by comparing the accuracy of four different manufacturing methods for metal coping: the conventional lost wax technique (CLWT); subtractive methods with wax blank milling (WBM); and two additive methods, multi jet modeling (MJM), and micro-stereolithography (Micro-SLA). MATERIALS AND METHODS. Thirty study models were created using an acrylic model with the maxillary upper right canine, first premolar, and first molar teeth. Based on the scan files from a non-contact blue light scanner (Identica; Medit Co. Ltd., Seoul, Korea), thirty cores were produced using the WBM, MJM, and Micro-SLA methods, respectively, and another thirty frameworks were produced using the CLWT method. To measure the marginal and internal gap, the silicone replica method was adopted, and the silicone images obtained were evaluated using a digital microscope (KH-7700; Hirox, Tokyo, Japan) at 140X magnification. Analyses were performed using two-way analysis of variance (ANOVA) and Tukey post hoc test (${\alpha}=.05$). RESULTS. The mean marginal gaps and internal gaps showed significant differences according to tooth type (P<.001 and P<.001, respectively) and manufacturing method (P<.037 and P<.001, respectively). Micro-SLA did not show any significant difference from CLWT regarding mean marginal gap compared to the WBM and MJM methods. CONCLUSION. The mean values of gaps resulting from the four different manufacturing methods were within a clinically allowable range, and, thus, the clinical use of additive manufacturing methods is acceptable as an alternative to the traditional lost wax-technique and subtractive manufacturing.

• Tuberculosis and Respiratory Diseases
• /
• v.61 no.4
• /
• pp.339-346
• /
• 2006

Background: There has no known epidemiologic survey on the frequency of complementary-alternative medicine (CAM) use in the treatment of adult asthma in Korea. This study examined the current use of CAM by asthma patients in Korea. Methods: One hundred adults with asthma, who had been admitted to Kyunghee university hospital between January 2000 and December 2003, were enrolled in this survey. They received a structured questionnaire interview and a clinical assessment of prevalence and pattern of CAM use. Results: 53% patients had an experience of at least one type of CAM during their asthma management. Users of CAM had more hospital visits than those who had never used CAM($1.46{\pm}0.68$ vs. $2.11{\pm}1.20$, p=0.001). Those in their $50^{th}$ decades had more experience of CAM (80%) than the other age groups. The methods of CAM used by our patients are as follows: Diet/nutritional therapy in 35 patients(69%), herbal therapy in 28 patients(53%), acupuncture in 9 patients(17%), moxa treatment in 6 patients(11%), breathing exercises in 1 patient(2%). Conclusions: More than 50% of patients with bronchial asthma have used CAM. A more detailed and large scaled study will be needed to define the actual status of the use of CAM in the treatment for asthma. Inaddition, further research on the scientific validation of the clinical efficacy of CAM in asthma management should be followed.

• Journal of Society of Preventive Korean Medicine
• /
• v.15 no.3
• /
• pp.67-81
• /
• 2011

Background : Complementary and alternative medicine has bee used to cardiovascular diseases. In recent years, many hospitals have tried to integrate complementary and alternative medicine(CAM) with conventional medical approaches for patients with chronic diseases. Recently, the prevalence of the use of traditional Korean medicine(TKM) among patients with chronic diseases, expecially, hemiplegia patients after cerebrovascular accident is increasing in Korea. To date, however, there were only few studies addressing the patients' attitudes, and utilization of TKM, compared to the well-documented escalating use of TKM among consumers in Korea. Objectives : The objective of this study was to analyze the prevalence of TKM use among hemiplegia patients after cerebrovascular accident and to determine what factors affect to use CAM among the patients. The study also aims to provide information on TKM and assist therapy selection among various CAM therapies for hemiplegia patients after cerebrovascular accident within health care system in which both practitioners of TKM and practitioners of modern Western medicine coexisted. Methods : The design of the study was descriptive cross-sectional, and data were collected using a 32-items questionnaire. The subjects were one hundred fifty nine patients with chronic diseases who visited or admitted to health care facilities in a hospital in Seoul Metropolitan city, Korea. Data were analyzed using 'SPSS Statistics 18.0 Network Version(on release 18.0.1 of PASW Statistics)' program. Various statistical methods were used to obtain a profile for participants and the therapies most frequently used by hemiplegia patients of TKM. Logistic regression analysis was employed in order to determine the predicting variables of TKM use. Results : The prevalence of the use of TKM was 51.6%. The most common TKM therapies used by the patients included acupuncture(93.2%), herbal medicine(64.8%), and cupping(37.5%). Results of logistic regression analysis revealed that the variables significantly related with TKM use were gender, marital status, job, No. of visiting health care facilities/week. Conclusions : This study shows that the use of TKM among the hemiplegia patients is relatively high in Korea, this topic should be taken into account in the development of a holistic approach for patients with chronic diseases and an efficient chronic disease management system in Korea.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.1 s.1
• /
• pp.193-201
• /
• 1993

In a number of areas, there are important benefits to be gained when we bring both the detection and monitoring abilities of remote sensing as well as the philosophical approach and analytic capabilities of a geographic information system to bear on a problem. A key area in the joint applications of remote sensing technology and GIS is to identify change. Whether this change is of interest for its own sake, or because the change causes us to act (for example, to update a map), remote sensing provides an excellent suite of tools for detecting change. At the same time, a GIS is perhaps the best analytic toot for quantifying the process of change. There are two alternative methods for quantifying changes. The conceptually simple approach is to un the pixel values in each of the images. This method is practical but may be too simple to identify the variety of changes in a complex scene. The common alternative is called symbolic change detection. The analyst first decides on a set of thematic categories that are important to distinguish for the application. This approach is useful only if accurate landuse/cover classifications can be obtained. Persons conducting digital change detection must be intimately familiar with the environment under study, the quality of the data set and the characteristics of change detection algorithms. Also, much work remains to identify optimum change detection algorithms for specific geographic areas and problems.

• Korean Journal of Animal Reproduction
• /
• v.9 no.2
• /
• pp.133-139
• /
• 1985

An immunoassay may be defined as an analytical procedure involving the competitive reaction between a limiting concentration of specific antibody and two populations of antigen, one of which is labelled or immobillized. The advent of immunoassay has revolutionised our knowledge of reproductive physiology and the practice of veterinary and clinical medicine. Radioimmunoassay (RIA) was the first of these methods to be developed, which meausred the analyte with good sensitivity, accuracy and precision (1,2). The essential components of RIA are:-(i) a limited concentration of antibodies, (ii) a reference preparation, and (iii) an antigen labelled with a radioisotope (usually tritium or iodine-125). Most procedures invelove isolating the antibody-bound fraction and measuring the amount of labelled antigen. Good facilities are available for scintilltion counting, data reduction nd statistical analysis. RIA is undergoing refinement through:-(i) the introduction of new techniques to separate the antibody-bound and free fractions which minimize the misclassification of labelled antigen into these compartments, and the amount of non-specfic binding. (3), (ii) the development of non-extration for the measurement of haptens (4), (iii) the determination of a, pp.rent free (i.e. non-protein bound) analytes (5), and (iv) the use of monoclonal antibodies(6). In 1968, Miles and Hales introduced in important new type of immunoassay which they termed immunora-diometric assay (IRMA) based on t도 use of isotopically labelled specific antibodies(7) in a move from limited to excess reagent systems. The concept of two-site IRMAs (with a capture antibody on a solid-phase, and a second labelled antibody to a different antigenic determinant of the analyte) has enabled the development of more sensitive and less-time consuming methods for the measurement of protein hormones ovar wide concentration of analyte (8). The increasing use of isotopic methos for diverse a, pp.ications has exposed several problems. For example, the radioactive half-life and radiolysis of the labelled reagent limits assay sensitivity and imposes a time limit on the usefulness of a kit. In addition, the potential health hazards associated with the use and disposal of radioactive cmpounds and the solvents and photofluors necessary for liquid scientillation counting are incompatable with the development of extra-laboratory tests. To date, the most practical alternative labels to radioisotopes, for the measurement of analytes in a concentration > 1 ng/ml, are erythrocytes, polystyrene particiles, gold sols, dyes and enzymes or cofactors with a visual or colorimetric end-point(9). Increased sensitivity to<1 pg/ml may be obtained with fluorescent and chemiluminescent labels, or enzymes with a fluorometric, chemiluminometric or bioluminometric end-point. The sensitivity of any immunoassay or immunometric assay depends on the affinity of the antibody-antigen reaction, the specific activity of the label, the precision with which the reagents are manipulated and the nonspecific background signal (10). The sensitivity of a limited reagent system for the measurement of haptens or proteins is mainly dependent upon the affinity of the antibodies and the smalleest amount of reagent that may be manipulated. Consequently, it is difficult in practice to improve on the sensitivity obtained with iodine-125 as the label. Conversely, with excess reagent systems for the measurement of proteins it is theoretically possible to increase assay sensitivity at least 1000 fold with alternative luminescent labels. To date, a 10-fold improvement has been achieved, and attempts are being made to reduce the influence of other variables on the specific signal from the immunoreaction.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.4
• /
• pp.199-208
• /
• 2023

Taguchi method is one of the most popular approaches for design optimization such that performance characteristics become robust to uncontrollable noise variables. However, most previous Taguchi method applications have addressed a single-characteristic problem. Problems with multiple characteristics are more common in practice. The multi-criteria decision making(MCDM) problem is to select the optimal one among multiple alternatives by integrating a number of criteria that may conflict with each other. Representative MCDM methods include TOPSIS(Technique for Order of Preference by Similarity to Ideal Solution), GRA(Grey Relational Analysis), PCA(Principal Component Analysis), fuzzy logic system, and so on. Therefore, numerous approaches have been conducted to deal with the multi-characteristic design problem by combining original Taguchi method and MCDM methods. In the MCDM problem, multiple criteria generally have different measurement units, which means that there may be a large difference in the physical value of the criteria and ultimately makes it difficult to integrate the measurements for the criteria. Therefore, the normalization technique is usually utilized to convert different units of criteria into one identical unit. There are four normalization techniques commonly used in MCDM problems, including vector normalization, linear scale transformation(max-min, max, or sum). However, the normalization techniques have several shortcomings and do not adequately incorporate the practical matters. For example, if certain alternative has maximum value of data for certain criterion, this alternative is considered as the solution in original process. However, if the maximum value of data does not satisfy the required degree of fulfillment of designer or customer, the alternative may not be considered as the solution. To solve this problem, this paper employs the desirability function that has been proposed in our previous research. The desirability function uses upper limit and lower limit in normalization process. The threshold points for establishing upper or lower limits let us know what degree of fulfillment of designer or customer is. This paper proposes a new design optimization technique for multi-characteristic design problem by integrating the Taguchi method and our desirability functions. Finally, the proposed technique is able to obtain the optimal solution that is robust to multi-characteristic performances.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.71
• /
• pp.127-146
• /
• 2016

There are two aims of this research: one is to verify the role of bill of lading and the method of delivery for container goods and the other is to suggest alternative methods for the crisis of bill of lading; that is, goods are arrived in ports but bill of lading is not arrived. The results of the analyses are as follows. First, delivery of container goods should be performed to exchange with bill of lading. Carriers should deliver goods to consignees to exchange with one among the number of issued bill of lading. In addition, when goods are delivered to consignees by the bill of lading, the other bill of lading is invalid. Second, there are several methods of delivery which are not exchanged with bill of lading such as letter of guarantee, surrender bill of lading, sea waybill, non-negotiable straight bill of lading and consignment of bill of lading to a captain. Delivery of container goods should be performed by exchanging bill of lading. In addition, there are two delivery methods by letter of guarantee: one is illegal and the other is legal. If there is damage for a bonafide-fide holder of bill of lading, carriers should make compensation for the damage. These methods consist of the delivery of goods which is not exchanged with bill of lading and there are two advantages of the methods; one is that consignees enjoy saving bonded warehouse fee and quick disposal after arriving goods and the other is that carriers immediately use vessels after unloading containers. However, the methods are based on utmost good faith between a seller and a buyer.