• Applied Microscopy
• /
• v.28 no.3
• /
• pp.273-282
• /
• 1998

Ultrastructure of fertilized egg envelope in the tomato clown anemonefish (Amphiprion freatus) was examined by mean of light, scanning and transmission electron microscopies. The fertilized egg of tomato clown anemonefish was of non-transparent, ellipsoidal, adhesive and non-floted type, and there were numerous oil droplets in the yolk sac and adhesive filaments in the area of the animal pole. The outer surface of egg envelope was smooth. The fertilized egg envelope consisted of two distinct layers; a non-adhesive outer electron-dense layer and an inner layer, consisting of five horizontal low electron-dense lamellae alternating with the middle electron dense interlamellae.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.91-91
• /
• 2009

Piezoelectric micro-pump should contain the physical running parts like check valves for acquiring the unilateral motion of fluid from the alternating motion of actuators. But the check valves raise many problems such as abrasion or exhaustive destruction by the recursive mechanical displacement To solve these problems, we propose a novle type piezoelectric valveless micro-pump using peristaltic motion due to the traveling wave excitation. Proposed pump model is consisted of two piezoelectric ceramic plates, elastic metal body, caps for covering flow path, rubber rings for sealing tightly and disk springs for the pressurization of pump body.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.6
• /
• pp.317-320
• /
• 2013

Partial discharge resistance for the epoxy systems with two diluents was investigated in the rod-plane electrodes arrangement, and the effect of electric frequency on the partial discharge resistance was also studied. Diglycidyl ether of bisphenol A (DGEBA) type epoxy was used as a base resin, and 1,4-butanediol diglycidyl ether (BDGE) or polyglycol (PG) as a reactive diluent was introduced to the DGEBA system, in order to decrease the viscosity of the DGEBA epoxy system. BDGE was acted as a chain extender, and PG acted as a flexibilizer, after the curing reaction. To measure the partial discharge resistance, 5 kV alternating current (ac) with three different frequencies (60, 500 and 1,000 Hz) was applied to the specimen in a rod-plane electrode arrangement, at $30^{\circ}C$. PG had a good effect, while BDGE had a bad effect on the partial discharge resistance of the DGEBA system, regardless of the electric frequency.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.186-188
• /
• 1988

Relaxation spectra of the linear dielectric constants $\varepsilon=\varepsilon'-j{\varepsilon}"$ have been measured as functions of temperature and frequency for alternating copolymers of vinylidene cyanide (VDCN/VAc, VDCN/VPr, VDCN/VBz and VDCN/St) It is found that the linear dielectric constants e show characteristics of the temperature dependence that the real part have a large peak related to the glass transition point(Tg), and of the frequency dependence that the real port increases with decreasing frequency and the imaginary part increases largely in low frequency range. These phenomena mean Debye-type relaxation due to the micro-Brownian moi ions of non-crystalline seqments.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2203-2204
• /
• 2006

When the coil with alternating current approaches to the conductor the eddy current flows in conductor. Eddy current is concentrated on the conductor surface and decrescent because of skin effet.. In this paper investigated eddy current characteristic that is happened in conductor. Analyzed characteristic using electromagnetic field finite element analysis program that is commercialized to analyze value of eddy current and penetration depth. Analyzed creation value of eddy current and penetration depth in conductor that change operation frequency and the material of conductor, coil outside diameter, inside diameter, position, type of conductor from analyzed eddy current characteristic. The results. using distribution of eddy current and penetration depth data is that will help to forecast ECT(Eddy Current Testing), Eddy current application and use field, eddy current loss.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.571-572
• /
• 2006

When the coil with alternating current approaches to the conductor the eddy current flows in conductor. Eddy current is concentrated on the conductor surface and decrescent because of skin effet.. In this paper investigated eddy current characteristic that is happened in conductor. Analyzed characteristic using electromagnetic field finite element analysis program that is commercialized to analyze value of eddy current and penetration depth. Analyzed creation value of eddy current and penetration depth in conductor that change operation frequency and the material of conductor, coil outside diameter, inside diameter, position, type of conductor from analyzed eddy current characteristic. The results, using distribution of eddy current and penetration depth data is that will help to forecast ECT(Eddy Current Testing), Eddy current application and use field, eddy current loss.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1063-1064
• /
• 2008

Bimodal tram has a carbody made of polymer composite material which is good electrical insulator. As an series hybrid type, Alternating voltage generated from generator coupled with CNG engine are rectified and transformed to variable voltage ranges which are applied to electrical apparatus and ECUs equipped inside of the tram. The failures of electrical insulation between high voltage($400V{\sim}800V$) and low voltage(24V) or between different kind of voltages such as AC and DC may cause some electrical interferences to prevent from operating rightly and other safety problem. This paper have investigated about the degradation factors of the electrical insulation and the earthing method available to bimodal tram, which is effective for preventing the electromagnetic interference coming from the inside or outside of tram but need some detecting measurements of earth leakage through electrical systems.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.478-483
• /
• 2000

In this study to cope with the decreasing product's life-cycle a virtual simulator to realize the simulation environment similar to a real manufacturing line is developed. The developed simulator plays a role in reducing the product conversion time by alternating manufacturing components and work plans on the simulation as manufacturing lines change and actuating a virtual manufacturing lines change and actuating a virtual manufacturing line before a real production. The developed simulator realized a virtual manufacturing line on the simulation using various manipulators and work cells as manufacturing components. Also It can be shown that the simulator can cope with rapid change of a manufacturing line by developing a interface that a separate process is managed for each manufacturing module and a manipulator component and a work cell are changed for a user to become convenient to teach tasks of each work module. using Microsoft Visual C++ 6.0 and OpenGL of Silicon Graphics for libraries to realize 3-dimensional graphic and constructing a database system, a hybrid type of hierachical and relational model to develop a progra that has efficiency and standardization.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.12
• /
• pp.617-622
• /
• 2006

It is necessary to measure precisely the magnetic characteristics of electrical steel sheets under rotating magnetic fields, to obtain an accurate numerical performance analysis of electric machines made of electrical steel sheets. In this paper, the two dimensional magnetic characteristics of an electrical steel sheet are measured and explained under rotating magnetic fields using a two-axes-excitation type single sheet tester (SST). Through experiments, the magnetic properties, under rotating magnetic fields, of a non-oriented and grain oriented electrical steel sheet were measured respectively. In addition, the iron losses due to not only the alternating magnetic fields, but also rotating magnetic fields were measured. These experimentally measured results can evidently be applied to the analysis of iron losses in electrical machines.

• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.1
• /
• pp.19-25
• /
• 2009

We suggest and evaluate a dynamic scheduling rule of machines and material handling systems for on-line operation in job shop type Flexible Manufacturing System. Alternating status should be able to take operation scheduling procedures and without delay in dynamic industrial environments effectively. The interaction(SPT-NS, SPT-QSNS, SPT-NUJ, EDD-NS, EDD-QSNS, EDD-NUJ, CR-NS, CR-QSNS, CR-NUJ) between machine operation scheduling and AGV dispatching rule were also studied in this research. The performance evaluation which was obtained from DSS compares the performance of Flow time, and Empty to loaded travel ratio. It is Compared with the best rules & two system.