• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5C
• /
• pp.654-654
• /
• 2004

본 논문에서는 이산웨이블렛 변환을 이용한 영상 압축 프로세서를 하드웨어로 구현하였다. 웨이블렛 변환을 위하여 필터뱅크 및 피라미드 알고리즘을 이용하였고 각 필터들은 FIR 필터로 구현하였다. 병렬구조로 이루어져 동일 클럭 싸이클에서 하이패스와 로패스를 동시에 수행함으로써 속도를 향상시킬 뿐 아니라 QMF 특성을 이용하여 DWT 연산에 필요한 승산기의 수를 절반으로 줄임으로써 하드웨어 크기를 줄이고 이용효율 또한 높일 수 있다. 다중 해상도 분해 시 필요한 메모리 컨트롤러를 하드웨어로 구현하여 DWT 계산이 수행되므로 이 융자는 단순한 파라메터 입력만으로 효과적인 압축율을 얻을 수 있도록 구조적으로 설계하였다. 실시간 영상압축 프로세서의 성능 예측을 위하여 MATLAB을 통하여 시뮬레이션 하였고, VHDL을 이용하여 각 모듈들을 설계하였다. 설계한 영상압축기는 Leonaro-Spectrum에서 합성하였고, ALTERA FLEX10KE(EPF10K100 EFC256) FPGA에 이식하여 하드웨어적으로 동작을 검증하였다. 설계된 부호화기는 512×512 Woman 영상에 대하여 33㏈의 PSNR값을 갖는다. 그리고 설계된 프로세서를 FPGA 구현 시 35㎒에서 정상적으로 동작한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1237-1245
• /
• 2006

This paper presented a hardware implementation of ARIA, which is a Korean standard l28-bit block cryptography algorithm. In this work, ARIA was designed technology-independently for application such as ASIC or core-based designs. ARIA algorithm was fitted in FPGA without additional components of hardware or software. It was confirmed that the rate of resource usage is about 19% in Altera EPXAl0F1020CI and the resulting design operates stably in a clock frequency of 36.35MHz, whose encryption/decryption rate was 310.3Mbps. Consequently, the proposed hardware implementation of ARIA is expected to have a lot of application fields which need high speed process such as electronic commerce, mobile communication, network security and the fields requiring lots of data storing where many users need processing large amount of data simultaneously.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.5
• /
• pp.107-114
• /
• 2004

In this paper, we present the architecture design of CDMA/TDMA modem chipset for wireless telemetry system. The wireless telemetry system a measuring data collecting system from many RTs(Remote Terminal) installed at the specific area using wireless communication technology. It consists of CU single CU (Central Unit) for collecting data and a large amount of RTs for transmitting the measuring data. We propose the hardware architecture of the modem for RT and CU. We also design those modem using Verilog HDL and synthesis them using Synopsys$^{TM}$ CAD tool. The modem of RT is implemented with 27K gates and that of CU is implemented around 220k gates using 0.6${\mu}{\textrm}{m}$ CMOS standard cell. The proposed system is implemented and tested using Altera$^{TM}$ FPGA.PGA.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1603-1609
• /
• 2010

This Paper deals with a design, making a prtotype and test methods of Real-time towed Line Array Sensor Data processing board for fast data communication and long range data transmission with SFM(Serial FPDP Module) through Optic-fiber channel. Towed line array sensors are installed in Frigate and the each LAS A, B, C group data from LAS is packed a previously agreed protocol and transmitted to the signal processing unit. Considering the limited space of VME 6U size, LAS Data processing board is designed with MPC8265 PowerPC Controller of Freescale for main system control and Altera's CycloneIII FPGA for sensor data packing, self-test simulation data generation, S/W FIFO et cetera. LAS Data processing board have VxWorks, the RTOS(Real Time Operating System) that present many device drivers, peripheral control libraries on board for real-time data processing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.439-446
• /
• 2011

In this paper, we proposed and implemented a dedicated hardware for Huffman coding which is a method of entropy coding to use compressing multimedia data with video coding. The proposed Huffman codec consists Huffman encoder and decoder. The Huffman encoder converts symbols to Huffman codes using look-up table. The Huffman code which has a variable length is packetized to a data format with 32 bits in data packeting block and then sequentially output in unit of a frame. The Huffman decoder converts serial bitstream to original symbols without buffering using FSM(finite state machine) which has a tree structure. The proposed hardware has a flexible operational property to program encoding and decoding hardware, so it can operate various Huffman coding. The implemented hardware was implemented in Cyclone III FPGA of Altera Inc., and it uses 3725 LUTs in the operational frequency of 365MHz

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.959-961
• /
• 2003

In this paper, we describe implemented DMAC (Direct Memory Access Controller) architecture on Altera's $Excalibur^{TM}$ that includes industry-standard $ARM922T^{TM}$ 32-bit RISC processor core operating at 200 MHz. We implemented DMAC based on AMBA (Advanced Micro-controller Bus Architecture) AHB (Advanced Micro-performance Bus) interface. Implemented DMAC has 8-channel and can extend supportable channel count according to user application. We used round-robin method for priority selection. Implemented DMAC supports data transfer between Memory-to-Memory, Memory-to-Peripheral and Peripheral-to-Memory. The max transfer count is 1024 per a time and it can support byte, half-word and word transfer according to AHB protocol (HSIZE signals). We implemented with VHDL and functional verification using $ModelSim^{TM}$. Then, we synthesized using $LeonardoSpectrum^{TM}$ with Altera $Excalibur^{TM}$ library. We did FPGA P&R and targeting using $Quartus^{TM}$. We can use implemented DMAC module at any system that needs high speed and broad bandwidth data transfers.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.11 no.3
• /
• pp.23-32
• /
• 2001

Since the LILI-128 cipher is a clock-controlled keystream generator, the speed of the keystream data is degraded in a clock-synchronized hardware logic design. Basically, the clock-controlled $LFSR_d$ in the LILI-128 cipher requires a system clock that is 1 ~4 times higher. Therefore, if the same clock is selected, the system throughput of the data rate will be lowered. Accordingly, this paper proposes a 4-bit parallel $LFSR_d$, where each register bit includes four variable data routines for feed feedback of shifting within the $LFSR_d$ . Furthermore, the timing of the propose design is simulated using a $Max^+$plus II from the ALTERA Co., the logic circuit is implemented for an FPGA device (EPF10K20RC240-3), and the throughput stability is analyzed up to a late of 50 Mbps with a 50MHz system clock. (That is higher than the 73 late at 45 Mbps, plus the maximum delay routine in the proposed design was below 20ns.) Finally, we translate/simulate our FPGA/VHDL design to the Lucent ASIC device( LV160C, 0.13 $\mu\textrm{m}$ CMOS & 1.5v technology), and it could achieve a throughput of about 500 Mbps with a 0.13$\mu\textrm{m}$ semiconductor for the maximum path delay below 1.8ns.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1577-1580
• /
• 2004

This paper proposes a design and implementation of transversal adaptive digital filter using LMS (Least Mean Squares) adaptive algorithm. The filter structure is based on Distributed Arithmetic (DA) which is able to calculate the inner product by shifting and accumulating of partial products and storing in look-up table, also the desired adaptive digital filter will be multiplierless filter. In addition, the hardware implementation uses VHDL (Very high speed integrated circuit Hardware Description Language) and synthesis using FLEX10K Altera FPGA (Field Programmable Gate Array) as target technology and uses Leonardo Spectrum and MAX+plusII program for overall development. The results of this design are shown that the speed performance and used area of FPGA. The experimental results are presented to demonstrate the feasibility of the desired adaptive digital filter.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2006.05a
• /
• pp.119-123
• /
• 2006

본 논문에서는 마이크로프로세서의 기능을 수행하는 데 필수적이며 사용빈도가 높은 총 64개의 명령어를 정의한 후 이를 처리할 데이터패스를 구성해 스테이트 머쉰으로 제어하는 방식으로 실용적 8비트 마이크로프로세서를 VHDL로 설계를 하고 FPGA로 구현했다. 통상 마이크로프로세서 관련 논문에서는 기능적 시뮬레이션까지만 했거나, 인터럽트 기능이 없든지, 하드웨어로 구현을 하지 않았거나, 또는 개발 관련 내용이 자세히 제시되지 않았었다. 본 논문에서는 데이터 이동, 논리, 가산 연산뿐만 아니라 분기, 점프 연산도 실행할 수 있도록 해 연산 및 제어용도에 적합하도록 하였고, 스택, 외부 인터럽트 기능까지도 지원하도록 해 그 자체로서 완전한 실용적 마이크로프로세서가 되도록 하였다. 또한 프로그램 ROM까지도 칩 안에 넣어 전체 마이크로프로세서를 단일 칩으로 구현하였다. 타이밍 시뮬레이션으로 검증 후 제작 과정을 통해, 설계된 마이크로프로세서가 정상적으로 동작함을 확인하였다. Altera MAX+.PLUS II 통합개발환경 하에서 EP1K50TC144-3 FPGA 칩으로 구현을 하였고 최대 동작주파수는 9.39MHz까지 가능했고 사용한 로직 엘리먼트의 개수는 2813개로서 논리 사용률은 97%이었다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.28-37
• /
• 2010

In this paper, the IC (Integrated Circuit) for multi-channel asynchronous communication was designed by using FPGA and VHDL language. The existing chips for asynchronous communication that has been used commercially are composed of one to two channels. Therefore, when communication system with two channels or more is made, the cost becomes high and it becomes complicated for communication system to be realized and also has very little buffer, load that is placed into Microprocessor increases heavily in case of high speed communication or transmission of high-capacity data. The designed IC was improved the function and performance of communication system and reduced costs by designing 8 asynchronous communication channels with only one IC, and it has the size of transmitter/receiver buffer with 256 bytes respectively and consequently high speed communication became possible. To detect errors between communications, it was designed with digital filter and check-sum logic and channel MUX logic so that the malfunction can be prevented and errors can be detected more easily and input/output port regarding each communication channel can be used flexibly and consequently the reliability of system was improved. It was composed and simulated logic of VHDL described by using Cyclone II Series EP2C35F672C8 and QuartusII V8.1 of ALTERA company. In order to show the performance of designed IC, the test was conducted successfully in QuartusII simulation and experiment and the excellency was compared with TL16C550A of TI (Texas Instrument) company and ATmegal28 general-purpose micro controller of ATMEL company that are used widely as chips for asynchronous communication.