• The Journal of Korean Association of Computer Education
• /
• v.16 no.3
• /
• pp.99-105
• /
• 2013

The FPGA-based emulation is an essential step in ASIC design for validation. For emulation with maximal frequency, it is crucial to understand the FPGA characteristics. This paper attempts to analyze the performance characteristics of the modern FPGAs from renowned vendors, Xilinx and Altera, with a case study utilizing various adders and MIPS CPU. Unlike the common wisdom, ripple-carry adder (RCA) does not utilize the inherent carry-chain inside FPGAs when structurally designed based on 1-bit adders. Thus, the RCA shows the inferior performance to the other types of adders in FPGAs. Our study also reveals that FPGAs from Xilinx exhibit different characteristics from the ones from Altera. That is, the prefix adder, which is optimized for speed in ASIC design, shows the poor performance on Xilinx devices, whereas it provides a comparable speed to the IP core on Altera devices. It suggests that error-prone manual change of the original design can be avoided on Altera devices if area is permitted. Experiments with MIPS CPU confirm the arguments.

• Electronics and Telecommunications Trends
• /
• v.19 no.2 s.86
• /
• pp.138-146
• /
• 2004

시스템 연결에 사용되는 프로토콜이 고속, 직렬화 됨에 따라 CDR이 내장된 SERDES 칩의 사용이 늘어나고 있다. 이에 Xilinx 나 Altera 사 등 FPGA 업체들이 SERDES를 FPGA 내장시킨 제품을 출시하기 시작하였다. 이러한 SERDES 임베디드 FPGA는 PCB 설계의 단순화와 신호무결성의 큰 이점이 있다. 본 고에서는 Altera 사의 SERDES 임베디드 FPGA, Stratix-GX 디바이스의 기가비트 트랜시버 ALTGXB 블록의 테스트에 관해 살펴본다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.670-673
• /
• 2008

Optimized algorithms and numerical expressions which had been verified through C program simulation, should be analyzed again with HDL (hardware description language) such as Verilog, so that the verified ones could be modified to be applied directly to hardware implementation. The reason is that the characteristics of C programming language design is intrinsically different from the hardware design structure. The hardware IP verified doubly in view of hardware structure together with algorithmic verification, was implemented on the Altera Excalibur FPGA device equipped with ARM9 microprocessor core, to a real chip prototype, using Altera embedded system development tool kit. The implemented finite field calculation IPs can be used as library modules as Elliptic Curve Cryptography finite field operations which has more than 193 bit key length.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.907-910
• /
• 2003

We have developed Logic Design Training Kit for studying, actual training, designing of FPGA(Xillinx) or CPLD(ALTERA CPLD), the Digital Logic Device. This training kit has 12 matrix keys, RS232 port for serial communication and uses LED array. six FND(Dynamic), LCD as display part. That is standard specification for digital logic training kit. Special point of this kit is that we make two logic device trainig kit. This two logic device kit have more smaller and simple architecture because only uses one chip. That chip already includes a lot of functions that need for training kit, such as : complex logic circuit needed the two kind of logic devices, 16 way of system clock deviding function, serial communication interrupt....etc. We called that one chip is Center Bridge Chipset ; Xillinx FPGA Spartan2. User can select between using one device of FPGA or CPLD, or uses both them. Because of, Center Bridge Chipset has profitable architecture. it can work as Logic Device's networking with Master-Slave connection When using both logic devices.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.6
• /
• pp.717-726
• /
• 2002

In this study, we analyze hardware implementation schemes of the ARS(Advanced Encryption Standard-128) algorithm that has recently been selected as the standard cypher algorithm by NIST(National Institute of Standards and Technology) . The implementation schemes include the basic architecture, loop unrolling, inner-round pipelining, outer-round pipelining and resource sharing of the S-box. We used MaxPlus2 9.64 for VHDL design and simulations and FLEX10KE-family FPGAs produced by Altera Corp. for implementations. According to the results, the four-stage inner-round pipelining scheme shows the best performance vs. cost ratio, whereas the loop unrolling scheme shows the worst.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.293-298
• /
• 2009

In this contribution, a 193-bit elliptic curve cryptography coprocessor was implemented on an FPGA board. Optimized algorithms and numerical expressions which had been verified through C program simulation, should be analyzed again with HDL (hardware description language) such as Verilog, so that the verified ones could be modified to be applied directly to hardware implementation. The reason is that the characteristics of C programming language design is intrinsically different from the hardware design structure. The hardware IP which was double-checked in view of hardware structure together with algoritunic verification, was implemented on the Altera CycloneII FPGA device equipped with ARM9 microprocessor core, to a real chip prototype, using Altera embedded system development tool kit. The implemented finite field calculation IPs can be used as library modules as Elliptic Curve Cryptography finite field operations which has more than 193 bit key length.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.675-676
• /
• 2012

In this paper, we are implemented the signal measurement system based on FPGA. The proposed hardware was mapped into Cyclone III from Altera and used 1,700(40%) of Logic Element (LE). The implemented circuit used 24,576-bit memory element with 6-bit input signal. The result from implementing in hardware (FPGA) could operate stably in 140MHz.

• The KIPS Transactions:PartC
• /
• v.8C no.1
• /
• pp.32-40
• /
• 2001

In this paper, we propose a high-speed modular multiplication algorithm which revises conventional Montgomery's algorithm. A hardware architecture is also presented to implement 1024-bit RSA cryptosystem for digital signature based on the proposed algorithm. Each iteration in our approach requires only one addition operation for two n-bit integers, while that in Montgomery's requires two addition operations for three n-bit integers. The system which is modelled in VHDL(VHSIC Hardware Description Language) is simulated in functionally through the use of $Synopsys^{TM}$ tools on a Axil-320 workstation, where Altera 10K libraries are used for logic synthesis. For FPGA implementation, timing simulation is also performed through the use of Altera MAX + PLUS II. Experimental results show that the proposed RSA cryptosystem has distinctive features that not only computation speed is faster but also hardware area is drastically reduced compared to conventional approach.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.69-78
• /
• 2001

This paper presents the design and FPGA implementation of a FLEX PSP(Protocol Signal Processor) for the portable high speed paging system. In this approach, two algorithms are newly proposed for implementing the PSP which provides capabilities of the maximum 6,400bps at speed, high-channel throughput, real time error correction and an effective frame search function. One is an accurate symbol synchronization algorithm which is applied for synchronizing the interleaved 4-level bit symbols which are received at input stage of A/D converter, and the other is a modified fast decoding algorithm which is provided for realizing double error correction of (31,21)BCH signal. The PSP is composed of six functional modules, and each module is modelled in VHDL(VHSIC Hardware Description Language). Both functional simulation and logic synthesis have performed for the proposed PSP through the use of Synopsys$^{TM}$ tools on a Axil-320 Workstation, and where Altera 10K libraries are used for logic synthesis. From logic synthesis, we can see that the number of gates is about 2,631. For FPGA implementation, timing simulation is performed by using Altera MAX+ PLUS II, and its results will be also given. The PSP which is implemented in 6 FPGA devices on a PCB has been verified by means of Logic Analyzer.r.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.4
• /
• pp.41-49
• /
• 2004

In this paper, a design and measurement method for FPGA embedded gigabit-transceiver is presented. Altera's Stratix GX device which is general purpose transceiver called GXB was used for implementing PCI Express transceiver. PCI Express is the generation high performance serial I/O bus used to interconnect peripheral devices. After GXB was set follow by PCI Express specifications, the design has been verified by timing simulation and implemented as hardware. We tested it as follow. First GXB internal digital and analog block test second GXB transmitter signal integrity test called Eye mask test, third GXB high-speed serial I/O buffer and on-chip termination test and the last GXB protocol test. This paper shows all the design and measurement procedure about FPGA embedded gigabit-transceiver.