• Journal of the Korea Safety Management & Science
• /
• v.18 no.3
• /
• pp.63-70
• /
• 2016

The main point of this study is to find out duplicates and differences among various regulations from different organizations. Also, it focuses on creating a reasonably unified regulation system to standardize safety & environment management. In this study, I analyzed the commonalities and the differences of two systems which are typical korean Process Safety Management System and off-site Consequence Analysis. It is confirmed that there are 25 species of overlapped material of those two systems and assessment like handling material information, facilities lists, hazardous substances and list of machine power. Process safety report focuses on onsite workers and facility protect. On the other hand, off-site Consequence Analysis focuses on design, arrangement and management of handling facility from off-site influence. I found difference two system of Enforcement purposes and way. Contradiction of Harmful information of Chemicals Control Act and occupation safety and health acts from same material. To be specific, There are no unit rule of occupation safety and health acts. so it permit inch, psi etc. But Chemicals Control Act provides that m, Mpa units. Therefore, Each regulatory duplication of items for chemicals management, standardization is writing so that you can coordinate overlapping items in the measures the need to be presented.

• Smart Structures and Systems
• /
• v.29 no.5
• /
• pp.653-660
• /
• 2022

Gravel scattering that is generated during operation of high-speed railway vehicle is cause to damage of vehicle such as windows, axle protector and so on. Especially, those are frequently occurred in winter season when snow ice is generated easily. Above all, damage of vehicle windows has not only caused maintenance cost but also increased psychological anxiety of passengers. Various methods such as heating system using copper wire, heating jacket and heating air are applied to remove snow ice generated on the under-body of vehicle. However, the methods require much run-time and man power which can be low effectiveness of work. Therefore, this paper shows that large-area heating system was developed based on heating coat in order to fundamentally prevent snow ice damage on high-speed railway vehicle in the winter season. This system gives users high convenience because that can remotely control the heating system using IoT-based wireless communication. For evaluating the applicability to railroad sites, a field test on an actual high-speed railroad operation was conducted by applying these techniques to the brake cylinder of a high-speed railroad vehicle. From the results, it evaluated how input voltage and electric power per unit area of the heating specimen influences exothermic performance to draw the permit power condition for icing. In the future, if the system developed in the study is applied at the railroad site, it may be used as a technique for preventing all types of damages occurring due to snow ice in winter.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.6
• /
• pp.1375-1383
• /
• 1994

The water distribution system problem consists of finding a minimum cost system design subject to hydraulic and operational constraints. Since the municipal water distribution system problem is nonconvex with multiple local minima, classical optimization methods find a local optimum. An outer flow search - inner optimization procedure is proposed for choosing a better local minimum for the water distribution systems. The pipe network is judiciously subjected to the outer search scheme which chooses alternative flow configurations to find an optimal flow division among pipes. Because the problem is nonconvex, a global search scheme called Stochastic Probing method is employed to permit a local optimum seeking method to migrate among various local minima. A local minimizer is employed for the design of least cost diameters for pipes in the network. The algorithm can also be employed for optimal design of parallel expansion of existing networks. In this paper one municipal water distribution system is considered. The optimal solutions thus found have significantly smaller costs than the ones reported previously by other researchers.

• Korean Security Journal
• /
• no.29
• /
• pp.87-113
• /
• 2011

Korean security industry has history of more than half a century, and it is growing fast. Private security industry contributes not only to livelihood safety, but also to national security. The area of the industry is being expanded. Security Act is closely related to the security industry, and has contributed to the growth of private security industry sector. Security Act of Korea, which was established in 1976, was originally made after Japanese Security Act. But nowadays, Korean Security Act is as systematic as the Japanese act. However, for 10 years, Security Act of Korea has been stagnant, not able to reflect security industries' demand. The writer has contributed to the development of Security Act. In 1995, the writer wrote the basic framework of Security Instructor Qualifications System and drafted Security Act in 2002. There are currently many problems in existing Security Act, but there are four representative problems. (1) No more establishment of new security sector, (2) excessively slack qualification criteria, (3) the education system for guards, (4) the security Instructor examination system. This paper derives problems of current Security Act, and suggests solutions for them. Not only the academic world, but all of us should pay attention to the revision of Security Act.

• Journal of KIBIM
• /
• v.12 no.2
• /
• pp.49-59
• /
• 2022

The main idea of this study is to propose a BIM-based automation system drawing up a report of energy conservation plan in the architecture division. In order to obtain a building permit, an energy conservation plan must be prepared for buildings with a total floor area of 500m² or more under the current law. Currently, it is adopted as a general method to complete a report by obtaining data and drawings necessary for an energy conservation plan through manual work and input them directly into the verification system. This method takes a lot of effort and time in the design phase which ultimately increases the initial cost of the business, including the services of companies specialized in the environmental field. However, in preparation for mandatory BIM work process in the future, it is necessary to introduce BIM-based automatic creation system that has an advantage for shortening the whole process to enable rapid permission of energy-saving designs for buildings. There may be many methods of automation, but this study introduces how to build an application using Dynamo of Revit, in terms of utilizing BIM, and write an energy conservation plan by automatic completion of report through Dynamo and Excel's VBA algorithm, which can save time and cost in preparing the report of energy conservation plan compared with the manual process. Also we have insisted that the digital transformation of architectural process is a necessary for an efficient use of our automation system in the current energy conservation plan workflow.

• The Journal of the Convergence on Culture Technology
• /
• v.1 no.4
• /
• pp.13-17
• /
• 2015

Even though the number of pet animal and breeder are increasing, there is little study related to the funeral of pet animal in Korea. In this paper, the factors affecting pet animal's funeral is conducted based on the survey. The study proves that the awareness of the pet animal funeral is positive but underprepared for pet animal's funeral. Therefore, pet animal funeral businesses operated on the permit system and the current law should be legalized while clarifying the difference between wild animal and pet animal. Also the professionals related to animal funeral should be trained.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.10
• /
• pp.480-486
• /
• 2005

This paper proposes a method to consider an aging failure probability and survival probability of power system components, though only aging failure probability has been considered in existing mean life calculation. The estimates of the mean and its standard deviation is calculated by using Weibull distribution, and each estimated parameters is obtained from Data Analytic Method (Type H Censoring). The parameter estimation using Data Analytic Method is simpler and faster than the traditional calculation method using gradient descent algorithm. This paper shows calculation procedure of the mean life and its standard deviation by the proposed method and illustrates that the estimated results are close enough to real historical data of combustion turbine generating units in Korean systems. Also, this paper shows the calculation procedures of a probabilistic failure prediction through a stochastic data analysis. Consequently, the proposed methods would be likely to permit that the new deregulated environment forces utilities to reduce overall costs while maintaining an are-related reliability index.

• Journal of Korea Multimedia Society
• /
• v.10 no.5
• /
• pp.668-678
• /
• 2007

The development of a wire and wireless communication technologies might permit easily accessing on various information. But, the easiness of accessing information has basically the problem of an unintended information outflow. An executable file which has key algorithms, data and resources for itself has very weak point in the security. Because the various information such as algorithms, data and resources is included in an executable file on embedded systems or virtual machines, the information outflow problem may appear more seriously. In this paper, we propose a technique which can be protecting the executable file contents for resolving the outflow problem through the encryption. Experimentally, we applied the proposed technique to EVM-the virtual machine for embedded system and verified it. Also, we tried a benchmark test for the proposed technique and obtained reasonable performance overhead.

• Cross-Cultural Studies
• /
• v.31
• /
• pp.395-414
• /
• 2013

EPS-TOPIK is a test of Korean proficiency which is enforced at the level of Korean government for the selection of competent foreign workers. Therefore, it must ensure validity and reliability, and practicability as a language assessment tool. For seeking a way of developing EPS-TOPIK, in this paper, the current state of EPS-TOPIK was investigated based upon the materials published by the Korean government, and the questions of EPS-TOPIK were analysed. Together with this, newspaper articles both in Korea and in foreign countries were also analyzed, and the directors of the EPS center abroad were interviewed. According to the survey results, as expected, the local environment of Korean education is poor in a number of ways to improve the Korean communication skills of foreign workers, as well as to prepare the EPS-TOPIK. To improve the efficiency of the EPS-TOPIK and to enhance the Korean communication skills of foreign workers, the Korean language institutions including the King Sejong Institute, which are in charge of the Korean language education should closely cooperate with the Human Resources Development Service of Korea, which is responsible for all of the influx of foreign workers.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.3
• /
• pp.77-86
• /
• 2019

The advent of Internet of Things (IoT) makes common nowadays computing environments involving programming not a single computer but several heterogeneous distributed computers together. Developing programs separately, one for each computer, increases programmer burden and testing all the programs become more complex. To address the challenge, this paper proposes an RPC-based unified programming language, UniPy, for development of MGC (eMbedded, Gateway, and Cloud) applications in IoT systems configured with popular computers such as Arduino, Raspberry Pi, and Web-based DB server. UniPy offers programmers a view of classes as locations and a very simple form of remote procedure call mechanism. Our UniPy compiler automatically splits a UniPy program into small pieces of the program at different locations supporting the necessary RPC mechanism. An advantage of UniPy programs is to permit programmers to write local codes the same as for a single computer requiring no extra knowledge due to having unified programming models, which is very different from the existing research works such as Fabryq and Ravel. Also, the structure of UniPy programs allows programmers to test them by directly executing them before splitting, which is a feature that has never been emphasized yet.