• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.80-84
• /
• 2008

This research has been carried out in order to provide countermeasure plans, fire prevention, improving institutional plans through analyzing accidental causes and investigating the situation of damage from the fire incident of the cold storage at Icheon. By the analysis of the incident, which is organized the process; for incidence, firstly a field investigation, next the overview of related laws, finally the analysis of problems and deducting suggestions, it was possible to find out the causes of casualties. We also suggested improving plans through finding out several problems such as safety management system and safety regulations, the permit on the completion of the cold storage and the completion examination of fire facilities as institutional problems and fireproof construction and the selection of finishing materials.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2284-2289
• /
• 1998

The Rotor Stress Indicator is an integrated system of hardware and program components which has been designed to read an assortment of turbine temperature and speed input devices, perform an analysis of the temperature induced stresses and output pertinent temperature and stress information to guide the turbine operator during turbine prewarming, start-ups, load changes, and shut-downs. The purpose of the RSI is to provide guidance to the plant operator during startup, shutdown, loading, and unloading of the turbine. Since the stresses are a function of the temperature changes to which the turbine is exposed, the RSI also provides guidance for operation of the boiler main steam and reheat steam temperatures as they affect the rotor stresses. This may permit more efficient overall boiler turbine start-ups. In this paper, new rotor stress analysis algorithm for RSI is introduced and compared with present system which has been used in thermal power plant.

• Hwankyungkyoyuk
• /
• v.13 no.1
• /
• pp.23-36
• /
• 2000

As the environmental industry grew bigger and bigger, the corcern about environmental condition increased and the demand of environmental expert tended to be much more increased. A lot of universities therefore established environment-related departments on campuses and ended up with producing numerous students every single year. However, some problems such as followings were in this study. First, the industry cannot adopt all the students directly from universities due to their low capabilities in environment affairs. Second, the universities yield much more students than the industry can actually adopt. In order to yield the appropriate students meeting the expectation of the industry, it is necessary to permit no more new department established on campus and to adopt new environmental field such as environmental management, eco-auditing and also 3+1 lecture system focused on real affairs.

• International Journal of Advanced Culture Technology
• /
• v.9 no.4
• /
• pp.213-218
• /
• 2021

In order to improve the quality of social services, developed countries overseas have introduced authorization or permit system to primary filtering when entering the market that provides social services. However, in Korea, a quality evaluation system for social service quality management has been introduced and implemented, but no significant effect has been achieved so far. Therefore, the purpose of this study is to investigate the relationship between service quality, service satisfaction, and repurchase intention, which are important variables to measure social service quality improvement, and to use it for service quality management. As a result of this study, service quality, service satisfaction, and repurchase intention are important factors for service quality improvement. It is necessary to secure a service provider of and continuous user selection and service quality management are also important.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.9
• /
• pp.192-203
• /
• 2001

The design of gate and runner(delivery system) is one of the most important subject in injection molding. Delivery system is a channel to flow the polymer melt from the injection molding machine to the mold cavities. Also, delivery system affect quality and productivity of the part. The synthesis of delivery system of injection molding has been done empirically, since it requires profound knowledge about the moldability and causal effects on the properties of the part, which are not available to designers through the current CAD systems. GATEWAY is a knowledge module which contains knowledge to permit non-experts as well as mold design experts to generate the acceptable geometries of gate and runner far injection molded parts. A knowledge-based CAD system is constructed by adding the knowledge module, GATEWAY, to an existing geometric modeler. A knowledge-based CAD system is a new tool which enables the concurrent design and CIM with integrated and balanced design decisions at the initial design of injection molding.

• Journal of Adhesion and Interface
• /
• v.7 no.4
• /
• pp.28-31
• /
• 2006

Due to the miniaturization of MEMS and microelectronics the joining techniques also have to be adjusted. The dosing technology with viscous adhesives does not permit reproducible adhesive volumes, which are clearly under a nano-liter. A nano-liter means however a diameter of bonding area within the range of several 100 micrometers. Additional, viscous adhesives need a certain time, until they are cross linked or cured. The problem especially in the MEMS is the initial strength, since it gives the time, which is needed for joining an individual adhesive joint. The time up to the initial strength is with viscous, also with fast curing systems, within the range of seconds until minutes. Until the reach of the initial strength, the micro part must be fixed/held. Without sufficient adjustment/clamping it can come to a shift of the micro parts. Also existing micro adhesive bonding processes are not batch able, i.e. the individual adhesive joints of a micro system must be processed successively. In the context of the WCARP III 2006 now an innovative method is to be presented, how it is possible to solve the existing problems with micro bonding. i.e. a method is presented, which is batch able, possess a minimum joining geometry with some micrometers and is so fast that no problems with the initial strength arise. It is a method, which could revolutionize the sticking technology in the micro system engineering.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.6
• /
• pp.553-560
• /
• 2016

There propagate use management paradigm in developed countries is changing as Command & Control $\Rightarrow$ Market Based $\Rightarrow$ Open Access $\Rightarrow$ Manage By Technology & Technical Analysis, that the policy response to environmental changes, such as a variety of new technologies. The emergence of service, the proliferation of propagation users It is to activate the market. However, the basic principles of radio management such that the change of paradigm be used to spread in a range that does not affect the interference, such as the horn is to be observed. Around the world in order to prevent the propagation and utilization Horn interference enacted regulations for managing the radio station, and also discipline.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2018

It is the content and scope of this study to analyze the problems of the current wireless service and the classification system of the radio station, and to examine the case of radio control in Japan and to establish a reasonable and efficient radio wave management plan. The results of this study can be used as basic data for reorganizing the legislation on radio wave enforcement ordinance, radio services and radio station classification standards. It is expected that it will be possible to improve the compliance and efficiency of the radio station licensing and inspection service while enhancing the policy compliance in the practical work by providing detailed explanations on the definition and classification system of the new radio task / radio station in the future.

• Journal of Forest and Environmental Science
• /
• v.30 no.1
• /
• pp.45-49
• /
• 2014

This study was tried to find out the applicability of decision support system for forest land use conversion, which developed based on algorithm for forest land-use conversion. Decision support system developed by Ministry of Safety Administration is free from the existing licensed laws omission. And it made the input requirements for each value of the final result so that you can determine whether the permit was available by the laws and regulations related to the algorithm for forest land use conversion. Also, in order to do field surveys, equal sampling interval method is used to extract samples for the operability by comparing and analyzing the actual area. As a result, 88 areas of total 100 areas are able to get permission by the decision support system for forest land use conversion, and it means if there is enough data with sufficient research, it can make the availability permits easily.

• Bulletin of the Korean Space Science Society
• /
• 1993.10a
• /
• pp.21-21
• /
• 1993

The imaging areas of currently available optical detectors are relatively small to cope with large image areas such as telescope focal Planes. One Possibility to obtain large detection areas is to assemble mosaics of Charge Coupled Devices(CCDs) and drive them simultaneously. Parallel driving of many CCDs together rules out the possibility of individual tuning; however such optimisation is very important when the ultimate low light level performance is required particularly for new devices. In this work, a new concept has been developed for an entirely novel approach where the drive waveforms are multiplexed and interleaved. This simultaneously reduces the number of leadout connections and permits individual optimisation efficiently. The controller has been designed to include one electronic of component produced by CAD software where most of the digital circuits are integrated to minimise the component count and improve the efficiency of the system greatly. The software has an open architecture to permit convenient modificationl by the user to fit their specific purposes. The desire of controller allows great flexibility of system parameters by the softwa re, specifically for the compatibility to deal with any number of mixed CCDs and in any format within the practical limit. The system has been integrated to test the performance and the result is discussed for readout noise, system linearity and cross-talk between the CCDs. The system developed in this work can be applicable not only for astro nomical observation with a telescope but also in other related fields for low light level detection systems such as spectroscopic application, remote sensing and X-ray detecti13n systems with large sensing areas and high resolution.