• Journal of Powder Materials
• /
• v.14 no.2 s.61
• /
• pp.140-144
• /
• 2007

Using Spark Plasma Sintering process (SPS), consolidation behavior of gas atomized $Mg_{97}Zn_1Y_2$ alloys were investigated via examining the microstructure and evaluating the mechanical properties. In the atomized ahoy powders, fine $Mg_{12}YZn$ particles were homogeneously distributed in the ${\alpha}-Mg$ matrix. The phase distribution was maintained even after SPS at 723 K, although $Mg_{24}Y_5$ particles were newly precipitated by consolidating at 748 K. The density of the consolidated bulk Mg-Zn-Y alloy was $1.86g/cm^3$. The ultimate tensile strength (UTS) and elongation were varied with the consolidation temperature.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.78.2-78.2
• /
• 2011

We utilize Sloan Digital Sky Survey DR7 spectroscopy of ~600 emission line galaxies (ELGs) in the Virgo and Ursa Major clusters to investigate their chemical properties depending on the environments. We derived chemical abundances of galaxies using either a direct estimation of the electron temperature or empirical calibrations. We also estimated star formation rates (SFRs) using H alpha and GALEX ultraviolet (UV) luminosities. We see no significant difference of UV colors and SFRs of ELGs between the Virgo and Ursa Major, indicating weak dependence of their star formation activity on global cluster environment. We also discuss the segregation of gas-phase element abundances in cluster environment.

• Journal of the Korean Ceramic Society
• /
• v.32 no.9
• /
• pp.1085-1091
• /
• 1995

Molybdenum disilicide (MoSi2) was synthesized from Mo, MoO3, Si and Al powders by self-propagating high temperature synthesis (SHS). The effect of processing parameters such as Mo/MoO3 molar ratio, Ar gas pressure in the reactor and pressing pressure of compacts in synthesis of MoSi2 were investigated. h-MoSi2 was transformed into t-MoSi2 with increasing the Mo/MoO3 mole ratio, and only t-MoSi2 phase was identified above 3.5 : 1 (molar ratio). The synthesized phases did not change with the variation of Ar gas pressure and pressing pressure of compacts. It was found that the combustion temperature was above 2,50$0^{\circ}C$. The products were separated into MoSi2 (s) and $\alpha$-Al2O3 by the difference of their specific grativities. Bending strength, hardness and density of sintered specimen exhibited 82 MPa, 5.368 GPa and 5.43 g/㎤, respectively.

• 한국균학회소식:학술대회논문집
• /
• 2015.11a
• /
• pp.23-23
• /
• 2015

Rice blast disease caused by M. oryzae is the most devastating fungal disease in rice. During the infection process, M. oryzae secretes a large number of glycosyl hydrolase (GH) proteins into the apoplast to digest host cell wall and assist fungal ingress into host tissues. In this study, we identified a novel M. oryze arabinofuranosidase B (MoAbfB) which is secreted during fungal infection. Live-cell imaging exhibited that fluorescent labeled MoAbfB was highly accumulated in fungal invasive structures such as appressorium, tips of penetration peg, biotrophic interfacial complex (BIC), as well as invasive hyphal tip. Deletion of MoAbfB mutants extended biotrophic phase followed by enhanced disease severity, whereas, over-expression of OsMoAbfB mutant induced rapid defense responses and enhanced rice resistance to M. oryzae infection. Furthermore, exogenous treatment of MoAbfB protein showed inhibition of fungal infection via priming of defense gene expression. We later found that the extract of MoAbfB degraded rice cell wall fragments could also induce host defense activation, suggesting that not MoAbfB itself but oligosaccharides (OGs) derived from MoAbfB dissolved rice cell wall elicited rice innate immunity.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.471-472
• /
• 2005

After thermal aging treatment at 693 K for 322 hours, any discernable precipitation could not be found in the $13{\sim}22$ Cr ODS steels, but showing an increase in SP-DBTT and reduction in upper shelf energy. The degree of aging embrittlement increases with Cr content such that the increases in SP-DBTT are 10, 50 and 73 K in 13, 16 and 19 Cr ODS steel, respectively. Amount of hardening also increased linearly as a function of Cr content. Based on the TEM observation, the origin of hardening must be related to the invisibly fine size of Cr-rich ${\acute{\alpha}}-phase$ (<1 nm).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.356-356
• /
• 2013

Monolithic 3D-IC는 현대 집적회로에서 interconnect로 인해 발생되는 여러 문제들을 해결하기 위해 새롭게 제시되고 있는 기술적 개념으로 구현 시 하위 소자 및 interconnet들에 영향을 주지 않는 저온공정이 필수적이다. 특히 germanium (Ge)은 낮은 녹는점 및 높은 캐리어 이동도 덕분에 3D-IC 구현 시 상위 소자의 channel 물질에 적합한 것으로 알려져 있다. 최근 이러한 Ge을 결정화하기 위해 solid phase crystallization (SPC), metal induced crystallization (MIC), laser annealing과 같은 결정화 방법들이 보고되고 있다. 현재까지 SPC 방법에 의해 얻어진 poly-Ge의 도핑농도 및 이동도와 같은 전기적 특성에 대한 분석은 수행된 바 있으나 3D-IC 공정에 적용이 가능한 MIC 기술을 통해 얻어진 poly Ge 필름에 대한 전기적 특성분석은 부족한 상황이다. 본 연구는 SPC 뿐만 아니라 MIC 방법을 통해 ${\alpha}$-Ge를 결정화시키고 얻어진 poly-Ge 필름의 전기적 특성을 XRD 및 hall effect measurement를 통해 분석하였다. 특히 일반적으로 Ge 내에서 p-type dopant로 동작을 하는 defect과 n-type dopant인 phosphorus 관계를 고려하여 여러 온도에서 SPC 및 MIC에 의해 얻어진 phosphorus doped poly-Ge 필름들의 전기적 특성을 분석하였다.

• Elastomers and Composites
• /
• v.28 no.4
• /
• pp.283-292
• /
• 1993

The morphology and impact strength of alloys of high density polyethylene(HDPE) and nylon-6(PA) with modified $ethylene-{\alpha}-olefin$ copolymer(OCP) as compatibilizer and impact modifier were measured by the scanning electron microscope(SEM) and the notched Izod impact test(and the high rate impact test), respectively. HDPE is incompatible with PA and specimens obtained from simple mechanical mixing show the inferior properties. However, it was indicated that OCP played roles of not only impact modifier but also compatibilizer. High rate impact test results were different from those of the notched Izod impact test, but in both tests OCP was effective for HDPE/PA blends. From SEM observation, the size of the dispersed phase in alloys prepared with OCP is much smaller than that of alloys without OCP and the interfacial adhesion of alloys prepared with OCP is also better. Toughening mechanism of polymer blends was discussed by combining the morphology analysis with mechanical and thermal properties.

• Journal of the Korean Ceramic Society
• /
• v.29 no.10
• /
• pp.779-784
• /
• 1992

In producing cordierite glass-ceramics by sintering, following experiments were conducted in order to determine the optimum heat-treatment schedule for high-crystallinity and dense sintered body. The glass composition of 11.67MgO-29.46Al2O3-52.88SiO2-5P2O5-1B2O3 (wt%) was selected on the basis of the early experiment. The 3-step heat treatment schedule was determined by the results of DTA, Dilatometric measurement and high-temperature XRD, where the particle-size-controlled glass powder was used. The degree of densification and the crystallinity were evaluated by the measurement of the bulk density and X-ray scattering intensity. The specimen fired with the optimum conditions showed ${\alpha}$-cordierite phase, relative density ∼98%, crystallinity ∼92%, thermal expansion coefficient ∼30${\times}$10-7/$^{\circ}C$, dielectric constant ∼5.5 and resistivity ∼1.0${\times}$1012 {{{{ OMEGA }}cm, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.173-176
• /
• 1998

We experimentally investigated the dielectric relaxation phenomena of a liquid crystal monolayers by the Displacement current techique and displacement current flowing across monolayers is analyzed using rod-like molecular model. It is revealed that the dielectric reaxation time $\tau$ of monolaters in the isotropic polar orientational phase is determined using a linear relashionship between the monolayers compression speed $\alpha$ and the molecular area. The dielectric relaxation time of phospholipid monolayers was examined on the basis of the analysis developed here.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.795-797
• /
• 1995

In this paper, we present a simple auto-tuning PID controller using genetic algorithms. The basic idea of the scheme is to parameterize a Ziegler-Nichols-like tuning formula by a single parameter ${\alpha}$, then to use GA to select optimal tuning parameter. Also, simple rule mechanisms make the controller adapt against large variations in parametric and dynamics uncertainties in the plant. These scheme lead to improved performance of the transient and steady state behavior of the closed loop system, including processes with long delay-time and nonminimum phase systems.