• Korean Journal of Microbiology
• /
• v.23 no.4
• /
• pp.297-301
• /
• 1985

The dependence of activities of Aspergillus phoenicis on the culture conditions in the progesterone transformation reaction was investigated. In the beginning of the reaction, $6{\beta},\;11{\alpha}-dihydroxyprogesterone$ was not produced even at high concentration of $11{\alpha}-hydroxyprogesterone$. However, large amount of the product was obtained after the complete exhaustion of progesterone. When spores of A.phoenicis replaced mycelia as enzyme source, $11{\alpha}-hydroxyprogesterone$ was produced after a considerably long indyction period, and its maximum production rate followed the exponential growth phase. The $6{\beta}-hydroxylation\;of\;11{\alpha}-hydroxyprogesterone$ continued, even after the stationary growth phase. A. phoenicis showed high enzyme activity for these reactions when the phosphate buffer solutions were used in place of the ordinary culture medium. The buffer solutions of low pH gave more yield of $11{\alpha}-hydroxyprogesterone$ than those of high pH. However, the addition of flucose to the buffer solutions did not activate the transformation reaction. The presence of progesterone seems to be necessary for the induction of enzymes for the $6{\beta}-hydroxylation\;of\;11{\alpha}-hydroxyprogesterone\;since\;6{\beta},\;11{\alpha}-dihydroxyprogesterone$ is not produced in the reaction medium containing only $11{\alpha}-hydroxyprogesterone$ as a substrate.

• Journal of the Korean Chemical Society
• /
• v.36 no.4
• /
• pp.504-510
• /
• 1992

Absorption properties of methylene blue (MB) in L-${\alpha}$-lecithin vesicle, bacteriorhodopsin and incorporated bacteriorhodopsin (InBR) vesicle systems at 20∼$60^{\circ}C$ has been studied by adsorption spectroscopy. The equilibrium of MB between monomer and dimer in lecithin vesicles has been existed at low concentration of MB, but oligomer has been formed in vesicle at higher concentration of MB. In most cases, the MB cluster was redistributed to monomer at the concentration of lecithin vesicles. Adding BR to constanr concentration of MB deceased the adsorption ratio (${\alpha}/{\beta}$) of MB, and MB was formed oligomeric aggregate. Absorption ratio (${\alpha}/{\beta}$) of MB was increased during phase transition of InBR vesicles, but independent of phase transition of lecithin vesicles. It suggested that aggregate of MB on the surfaces of InBR vesicles were redistributed to monomer under the influence of lipid phase transition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.143-146
• /
• 2003

열증착법을 이용하여 copper(II) phthalocyane (CuPc)의 박막을 제작하였다. 기판의 예열 온도를 달리하여 제작된 CuPc의 박막을 x-ray diffraction, SEM, UV visible absorption spectra의 변화를 통해 관찰한 결과 결정의 구조에 따라 ${\alpha}$-phase와 ${\beta}$-phase로 구분할 수 있었다. 이러한 결정 구조의 변화는 CuPc 박막의 전기전도 특성에 영향을 달리하여 유기발광 소자에 응용이 가능할 것으로 예상된다.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.627-631
• /
• 2010

$\alpha$-Alumna particles were prepared by a precipitation method with metal fluoride additive. Aluminum nitrate and ammonia solution were used as starting materials. $AlF_3$, $CaF_2$, and $MnF_2$ were utilized as additives. The effects of precipitation solvent and metal fluoride on the phase transformation temperature, size and morphology of $\alpha$-alumna particles were investigated. The solvent for precipitation did not affect the phase transformation temperature, while it influenced the size of $\alpha$-alumna particles. The phase transformation temperature to $\alpha$-alumna was reduced by addition of metal fluoride and was different with metal cation in metal fluoride ($AlF_3(800^{\circ}C)$ < $MnF_2(900^{\circ}C)$ < $CaF_2(950^{\circ}C)$). The addition of each of three metal fluorides led to the formation of platelike particles and, among the three additives, $MnF_2$ additive resulted in the formation of relatively small particle.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.262-264
• /
• 1996

This paper presents a new dual loop control using novel vector phase locked loop(VP-PLL) for a high power static var compensator(SVC) with three-level GTO voltage source inverter(VSI). Through circuit DQ-transformation, a simple dq-axis equivalent circuit is obtained. From this, DC analysis is carried out to obtain maximum controllable phase angle ${\alpha}_{max}$ per unit current between the three phase source and the switching function of inverter, and AC open-loop transfer function is given. Because ${\alpha}_{max}$ becomes small in high power SVC, this paper proposes VP-PLL for more accurate $\alpha$-control. As a result, the overall control loop has dual loop structure, which consists of inner VP-PLL for synchronizing the phase angle with source and outer Q-loop for compensating reactive power of load. Finally, the validity of the proposed control method is verified through the experimental results.

• Journal of the Korean Applied Science and Technology
• /
• v.13 no.3
• /
• pp.127-136
• /
• 1996

Thermograms of methylene blue(MB) in $L-{\alpha}-lecithin$ vesicle and incorporated purple membrane vesicle(InPM) systems have been studied by photochemical reaction differential scanning calorimetry at $25{\sim}55^{\circ}C$. Phase transition temperatures of lecithin vesicle, purple membrane(PM), and InPM were found to be independent of illumination of light(436nm) at $39{\sim}40^{\circ}C$, but endothermic phase transition was found in InPM vesicle. In MB-InPM system, endothermic phase transition was found on unillumination of light at $40{\sim}42^{\circ}C$, but exothermic phase transition was found on steady illumination of light at $48{\sim}52^{\circ}C$. It was estimated that the light energy absorbed from MB on vesicular surface was transferred to PM, and the transferred energy was redistributed to hydrophobic site of membrane. Therefore, the exothermic phase transition was measured at high temperature because of the increased hydrophobicity of acyl chain.

• Journal of Korea Foundry Society
• /
• v.18 no.6
• /
• pp.550-554
• /
• 1998

The microstructures of rapidly solidified binary Ti-Al alloys containing $45{\sim}58\;at%Al$ have been studied using C/S (carbon/sulfur), N/O (nitrogen/oxygen) analyser, X-ray fluorescence spectrometer (XRF), X-ray diffractometer (XRD), optical microscope (OM) and scanning electron microscope (SEM). The phases present in the alloys and their distribution were found to be a sensitive function of Al content. Essentially single-phase (${\gamma}$) microstructures were observed to alloys with 45 at%Al, 55 at%Al and 58 at%Al. In other content alloys, two phase (${\alpha}_2$, ${\gamma}$) microstructures were observed. The 48 at%Al, 52 at%Al alloys contain (${\gamma}+{\alpha}_2$) phase and ${\alpha}_2$ phase. These results indicate that rapid solidification affect the solidification path, then metastable phase forming during solidification.

• Journal of Korea Foundry Society
• /
• v.27 no.4
• /
• pp.167-172
• /
• 2007

In the present study, the microstructural evolution and mechanical properties of $Al_{71.6}Ge_{28.4}$ eutectic alloy have been investigated. Stable (fcc ${\alpha}$-Al and diamond cubic ${\beta}$-Ge) and various metastable crystalline (monoclinic, rhombohedral) phases were produced by competitive phase selection during non-equilibrium processing methods i.e. melt spinning and injection casting. The as-injection casted samples containing metastable-equilibrium eutectic (${\alpha}$-Al + monoclinic) structure showed much higher strength than samples with equilibrium eutectic (${\alpha}-Al+{\beta}-Ge$) structure but plasticity disappointingly diminished. In order to endow the enhanced ductility without significant strength drop, the alloys was heat-treated at transition temperature from metastable phase to stable phase. The annealed specimen displayed the phase transformed microstructural evolution and enhanced macroscopic plasticity.

• Journal of Magnetics
• /
• v.16 no.2
• /
• pp.173-176
• /
• 2011

Fe-Cr alloys with different Cr contents were prepared by an arc melting technique. The alloys were isochronally aged in the range from $400^{\circ}C$ to $900^{\circ}C$ with $50^{\circ}C$ steps with a holding time of 100 hours. The ageing produced embrittlement in the alloys due to either the formation of a Cr-rich ${\alpha}'$ phase or a $\sigma$ phase at high temperatures. Magnetic Hysteresis Loop (MHL) and Micro-Vickers hardness were measured at each step to correlate the magnetic and mechanical properties. Coercivity and hardness of the alloys were increased and remanence decreased up to 500-$550^{\circ}C$ due to formation of a Cr-rich ${\alpha}'$ phase. Beyond 500-$550^{\circ}C$ range, the coercivity and hardness decreased and remanence increased due to the coarsening or dissolution of the Cr-rich ${\alpha}'$ phase. In the Fe-48% Cr alloy, formation of the $\sigma$ phase at $700^{\circ}C$ reduced the maximum induction of the alloy significantly.

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.644-651
• /
• 1999

In this experiment the Iron phthalocyanine (FePc) films on Si-wafer and alumina pallet were prepared using vacuum sublimation with conditions of changing reaction time, temperature, and deposition rate. Then, some samples were annealed following annealing. Techniques such as XRD, SEM, and resistance measurement method, were dedicated to characterize the changes of surface structure, phase transformation and electric resistance sensitivity in accordance with change of film thickness. In proportion to the decrease of deposition temperature from $370^{\circ}C$ to $350^{\circ}C$, intensities of (200), (011), (211) and (114) planes of $\alpha$-phase were decreased and (100) plane of $\beta$-phase were appeared. The film thickness were controlled by regulating the volume of precursor material during rapid deposition. As a result, it was observed that crystalline particle size had been increased according to the increase of film thickness and $\alpha$-phase transformed to $\beta$-phase. In consequence of measuring the crystallinity of films annealed between $150^{\circ}C$ and $350^{\circ}C$, $\alpha$- to $\beta$-phase transformation was appeared to begin at $150^{\circ}C$ and completely transformed to $\beta$-phase at $350^{\circ}C$. Electric resistance sensitivity of FePc film to $NO_x$ gas along temperature change of FePc films was observed to be more stable with the decrease of the film thickness.