Journal of The Korean Society of Agricultural Engineers
/
v.54
no.3
/
pp.149-157
/
2012
For the systemic management and planning of future agricultural water resources, deriving and analyzing the various results of climate change are necessary to respond the uncertainties of climate change. This study assessed the impact of climate change on the rainfall, temperature, and agricultural water requirement targeting in the Nakdong-river's basin periodically according to socioeconomic driving factors under the scenarios A1B, A2 and B1 of the Special Report on Emission Scenarios (SRES) through the various IPCC GCMs. As a result of future rainfall change (2011~2100), increasing or decreasing tendency of rainfall change for future periods did not show a clear trend for three rainfall observatories, Daegu, Busan and Gumi. The characteristics of the temperature change consistently show a tendency to increase, and in the case of Daegu observatory, high temperature growth was shown. Especially, it was increased by 93.3 % in the period of future3 (2071~2100) for A2 scenario. According to the scenario and periodic analyses on the agricultural water demand, which was thought to be dependent on rainfall and temperature, the agricultural water demand increased at almost every period except during the Period Future1 (2011~2040) with different increase sizes, and the scenario-specific results were shown to be similar. As for areas, the agricultural water demand showed more changes in the sub-basin located by the branch of Nakdong-river than at the mainstream of the River.
Transactions of the Korean Society of Mechanical Engineers B
/
v.26
no.2
/
pp.227-237
/
2002
A numerical technique for simulating the aggregation of charged particles was presented with a Brownian dynamic simulation in the free molecular regime. The Langevin equation was used for tracking each particle making up an aggregate. A periodic boundary condition was used for calculation of the aggregation process in each cell with 500 primary particles of 16 nm in diameter. We considered the thermal force and the electrostatic force for the calculation of the particle motion. The electrostatic force on a particle in the simulation cell was considered as a sum of electrostatic forces from other particles in the original cell and its replicate cells. We assumed that the electric charges accumulated on an aggregate were located on its center of mass, and aggregates were only charged with pre-charged primary particles. The morphological shape of aggregates was described in terms of the fractal dimension. In the simulation, the fractal dimension for the uncharged aggregate was D$\_$f/ = 1.761. The fractal dimension changed slightly for the various amounts of bipolar charge. However, in case of unipolar charge, the fractal dimension decreased from 1.641 to 1.537 with the increase of the average number of charges on the particles from 0.2 to 0.3 in initial states. In the bipolar charge state, the average sizes of aggregates were larger than that of the uncharged state in the early and middle stages of aggregation process, but were almost the same as the case of the uncharged state in the final stage. On the other hand, in the unipolar charge state, the average size of aggregates and the dispersion of particle volume decreased with the increasing of the charge quantities.
Jeong, Hye-Lim;Ahn, Sung-Kyu;Kim, Mun Sung;Park, Ki-Woong
The Journal of Korean Institute of Next Generation Computing
/
v.13
no.2
/
pp.7-17
/
2017
In this paper, we propose the TPS (TPM-enhanced Privacy Protection System) which is an automated privacy protection system enhanced with a TPM (Trusted Platform Module). The TPS detects documents including personal information by periodic scanning the disk of clients at regular intervals and encrypts them. Hence, system manages the encrypted documents in the server. In particular, the security of TPS was greatly enhanced by limiting the access of documents including the personal information with regard to the client in an abnormal state through the TPM-based platform verification mechanism of the client system. In addition, we proposed and implemented a VTF (Virtual Trusted File) interface to provide users with the almost identical user interface as general document access even though documents containing personal information are encrypted and stored on the remote server. Consequently, the TPS automates the compliance of the personal information protection acts without additional users' interventions.
This study aimed to find out suitable culture conditions for the differentiation of human amniotic membrane-derived stem cells(HAM) into hepatocyte-like cells. Almost homogenous population of fibroblast-like cells was successfully isolated from the amniotic membrane. In comparison to the non-coated plates and in the absence of insulin/transferrin/selenium(ITS), HAM cultured on the fibronectin-coated plates and in the presence of ITS showed the more intense immunocytochemical staining against the albumin. Addition of both fibroblast growth factor(FGF)-1 and -2 to the differentiation medium gave stronger staining compared to the treatment with FGF-1 or -2 alone. Periodic acid Schiff's base staining of glycogen and morphological turnover of fibroblast-like appearance of HAM into round shape matched the results of immunocytochemical studies. When the efficiency of two-step culture method was examined on the differentiation of HAM into hepatocyte-like cells, all of the results of immunocytochemical staining, periodic acid Schiff's staining and morphological change exhibited effective hepatic differentiation of HAM compared to the continuous culture method. Immunoblot analyses of HAM- conditioned media against the albumin showed that the culture of HAM in the presence of both ITS and fibronectin always gave a stronger staining intensity than those in the absence of them, and that the addition of ether mixture of FGF-4 and either FGF-2 or transforming growth $factor(TGF)-{\alpha}$ to the culture medium significantly enhanced the albumin secretion by HAM. Based on these observations, it is suggested that HAM could differentiate into hepatocyte-like cells under a culture condition consisting of fibronectin and ITS, and addition of FGF-4 with either one of FGF-2 or $TGF-{\alpha}$ could enhance the hepatic differentiation of HAM.
Eun, Baik-Lin;Moon, Jin Soo;Eun, So-Hee;Lee, Hea Kyoung;Shin, Son Moon;Seong, In Kyung;Chung, Hee Jung
Clinical and Experimental Pediatrics
/
v.53
no.3
/
pp.300-306
/
2010
Purpose : Recent changes in the population structure of Korea, such as rapid decline in birth rate and exponential increase in old-aged people, prompted us to prepare a new health improvement program in children and adolescents. Methods : We reviewed current health screenings applied for children and adolescents in Korea and other developed countries. We collected and reviewed population-based data focused on mortality and morbidity, and other health-related statistical data. We generated problem lists in current systems and developed new principles. Results : Current health screening programs for children and adolescents were usually based on laboratory tests, such as blood tests, urinalysis, and radiologic tests. Almost all of these programs lacked evidence based on population data or controlled studies. In most developed countries, laboratory tests are used only very selectively, and they usually focus on primary prevention of diseases and health improvement using anticipatory guidance. In Korea, statistics on mortality and morbidity reveal that diseases related to lifestyle, such as obesity and metabolic syndrome, are increasing in all generations. Conclusion : We recommend a periodic health screening program with anticipatory guidance, which is focused on growth and developmental surveillance in infants and children. We no longer recommend old programs that are based on laboratory and radiologic examinations. School health screening programs should also be changed to meet current health issues, such as developing a healthier lifestyle to minimize risk behaviors—or example, good mental health, balanced nutrition, and more exercise.
Residual toxicity test to honeybee was conducted to evaluate an indirect effects on honeybee after planting hole application of systemic insecticides which were highly toxic to honeybee (Apis mellifera). In this study, It was applied three application rates in the planting hole by three systemic insecticides, dinotefuran GR, imidacloprid GR and clothianidin GR at planting time of tomato. Residual analysis of foliage was carried out after periodic sampling the foliage and investigated the effects of exposed honeybee on the tomato foliage. The honeybee mortality by dinotefuran residues on the foliage was shown almost 100% at 7 days after treatment and decreased 17 days after treatment. The maximum mortality of honeybee by imidacloprid residues on the foliage was 44 ~ 72%. But the effect of pesticide lasted for 18 days and then decreased. The honeybee mortality by clothianidin residues on the foliage was 100% at 7 days after treatment and decreased 14 days after treatment. A tendency of the honeybee mortality and residue in foliage showed a similar character as time goes by. The residues in tomato foliage decreased gradually after 14 days by vigorous growth of tomatoes and the toxic effect of honeybee was significantly decreased after 21 days in actual usage of the treatment.
Mandible defects could be caused by congenital malformations, trauma, osteomyelitis, tumor resection. If large areas are included for reconstruction, those are primarily due to tumor resection defects. The large jaw defect results in a problem about mastication, swallowing, occlusion and phonetics, and poor esthetics causes a lot of inconvenience in daily life. It is almost impossible to be a part underwent mandibular resection completely reproduced, should be rebuilt artificially. This case is of a patient who was diagnosed with squamous cell carcinoma pT1N0M0, stage I in February 2004 and received surgery (combined mandibulectomy and neck dissection operation (COMMANDO) in oromaxillofacial surgery) in March 2004, by implant assisted removable partial denture. We could obtain good retention and stability through sufficient coverage and implant holding. Follow up period was about four years. Mandibular left third molar regions have been observed to have resorption of surrounding bone, and periodic check-ups are necessary conditions.
The Photosynthetic bacterium, Rhodopseudomonas sphaeroides strain B6 was irnmobilized on agar gel. The optimum concentration of agar for hydrogen production was 2% (w/v). Maximum rates of hydrogen production by immobilized (300 ml of gel; 2.85 rng dry cells/ml) and free cells (1l culture; 0.87 mg dry cells/ml) were 47.5 and 48.0 ml/hr/culture, respectively. However, when both cultures were fed by 10 mmoles of lactate as limited electron donor at the later period of incubation, the activity of hydrogen production by free cells was significantly decreased but, immobilized cells continued hydrogen production with almost the same initial rate. Wc examined hydrogen production by immobilized cells of strain B6 under periodic illumination for 12 hr-intervals. When the culture was periodically fed by basal medium containing 9.3 rnmoles of DL-lactate and 1.86 mmoles of L-glutamate as consumed electron donor and nitrogen source, respectively, for every one liter of hydrogen produced, hydrogen was evolved continuously with the average rate of 510 ml/day/300 ml gel (2.9 rng dry cellslml) during the incubation time for 228 hr.
Proceedings of the Korean Powder Metallurgy Institute Conference
/
2002.07a
/
pp.25-37
/
2002
The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.
Effect of humic acid (HA), photo-oxidation and adsorption with periodic $N_2$ back-flushing was investigated in hybrid process of ceramic ultrafiltration and photocatalyst for drinking water treatment. It was compared and investigated with the previous result at water back-flushing in viewpoints of membrane fouling resistance ($R_f$), permeate flux (J), and total permeate volume ($V_T$). As decreasing HA, $R_f$ decreased dramatically and J increased, and finally $V_T$ was the highest at HA 2 mg/L. As HA concentration increased from 2 to 10 mg/L, the membrane fouling resistance after 180 mins' operation ($R_{f,180}$) improved 0.8 times more than that of water back-flushing. Therefore, HA concentration should affect on the membrane fouling at $N_2$ back-flushing than water back-flushing. Turbidity treatment efficiencies were almost constant independent of HA concentration, but HA treatment efficiency was the maximum at HA 2 mg/L. This means that adsorption and photo-oxidation of photocatalyst beads could removed HA at HA 2 mg/L, but it was not enough at 4 mg/L. Beyond HA 6 mg/L, UF could effectively treat HA by thick cake layer on membrane surface and severe inner membrane fouling.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.