• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.405-406
• /
• 2006

Raw materials from different sources, produced by a given process and having equal chemical composition, are supposed to be equivalent. The differences in sintering behavior have been investigated on P/M steels obtained from four diffusion-bonded powders (Fe + Ni + Cu + Mo) on atomized iron base, at the same alloy contents. Two levels of carbon and two sintering conditions have been investigated. Dimensional changes, C content, hardness, microhardness pattern, universal hardness, fractal analysis, pore features, microstructure features, and rupture strength have been compared to characterize different raw materials. The results show that the claimed equivalence is not confirmed by experimental data.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.73-76
• /
• 1999

In this thesis, we fabricate a zero-magnetostrictive amorphous ribbon measure the impeadance effect, and then Investigate possibility as a sensor material. $Co_{72.5}$F $e_{0.5}$M $o_{2}$ $B_{15}$ S $i_{5}$ is used as composition of specimen alloy. We first melt the specimen in high frequency induction furnace and then rapidly quench it by using single roll technique. As the result, we obtain a ribbon where thickness is 12${\mu}{\textrm}{m}$, width is 1mm and length is 93mm. Consequently, it is proved through this study that zero-magnetostrictive amorphous ribbon can be used as an excellent magnetic sensor material.rial.l.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.142-145
• /
• 2008

Process simulation requires accurate and reliable data for a wide variety of material properties, ranging from thermal conductivity to flow stress curves. Traditionally such data are gathered from experimental sources, which has significant disadvantages in that not all of the required data is readily available, it may be from various sources that are themselves inconsistent, measurement of high temperature properties is expensive, and furthermore the properties can be sensitive to microstructure as well as to alloy composition. This article describes the development of a new multi-platform software program called JMatPro, which is based on CALPHAD methodology, for calculating the properties and behavior of multi-component alloys. A feature of the JMatPro is that the calculations are based on sound physical principles rather than purely statistical methods. Thus, many of the shortcomings of methods such as regression analysis can be overcome.

• Transactions of Materials Processing
• /
• v.29 no.6
• /
• pp.307-315
• /
• 2020

The cemented carbide and stainless steel were bonded using a hot-vacuum brazing method to analyze the bonding interface. Since it is suitable for the hot vacuum brazing, nickel metal was used as a binder among the main components of the cemented carbide, and a new cemented carbide material was developed by adjusting the alloy composition. The paste, which is one of the important factors affecting the hot vacuum brazing bonding, was able to improve brazing adhesion by mixing solder as Ni powder and a binder as an organic compound at an appropriate ratio. Division of the stainless steel yielded a dense brazing result. This study elucidated the interfacial characteristics of wear-resistant parts by bonding stainless steel and cemented carbide via hot vacuum brazing.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.2
• /
• pp.127-136
• /
• 1995

The simultaneous addition of Al and Cr to the surface of Ni-and Fe-base alloy provides enhanced resistance to oxidation and corrosion in high temperatures. However, because of the large differences in thermodynamic stabilities of the volatile halides of Al and Cr, the codeposition of Al and Cr by halideactivated pack cementation is only possible for very specific, limited combinations of conditions. In this study, the experiments on the combinations of various metallic source powders and activators were conducted in order to obtain codeposition layers of Al and Cr on Ni with adequate composition by pack cementation. When Cr-Al masteralloy was used as a source powder, it was not easy to control Al and Cr content sensitively in the coating layers. On the other hand, when pure Cr and Al powder was used, ${\beta}$-NiAl layer containing about 20wt % Cr was obtained.

• Journal of Technologic Dentistry
• /
• v.7 no.1
• /
• pp.13-18
• /
• 1985

Casting alloys, both precious and non-precious, were by heat in order to observe the change in HB and the results were : 1. The hard treatment showed 1.4 - 1.5 times as high as the soft treatment in HB. 2. The experiment shows that Au-Pt should be contained more than 75% to prevent color change. 3. Cu by hard teatment played the greatect part in creasing the solidity of Ag-Cu alloy. 4. Casting Co-Cr alloys showed little difference of HB in heat treatment.

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.235-241
• /
• 1989

Static according tests were carried out on a series of amorphous TbFe thin films of various composition under a constant laser irradiation condition. Examination of recorded domain configurations by using polarizing microscope led to the categorization of domain characteristics into 3 distinctly different types; i.c., type A: circular domains with smooth boundaries, the size not sensitive to variation of bias field, type B: domains of irregular shape at low bias, the size increasing and the boundaries getting smoother and more circular with increasing bias field and type C: not recordable. Critical factor which distinguishes among each types was fond to be the relative magnitude of H and H of the film near T, regardless of constituent atomic species. Micromagnetical process of thermomagnetic recording cycle was analyzed scheniatically for each type.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.784-791
• /
• 2019

In the present study, a series of tungsten austenitic stainless steel alloys have been developed by interchanging the molybdenum in standard SS316 by tungsten. This was done to minimize the long-life residual activation occurred in molybdenum and nickel after decommissioning of the power plant. The microstructure and mechanical properties of the prepared alloys are determined. For the sake of increasing multifunction property of such series of tungsten-based austenitic stainless steel alloys, gamma shielding properties were studied experimentally by means of NaI(Tl) detector and theoretically calculated by using the XCOM program. Moreover, fast neutrons macroscopic removal cross-section been calculated. The obtained combined mechanical, structural and shielding properties indicated that the modified austenitic stainless steel sample containing 1.79% tungsten and 0.64% molybdenum has preferable properties among all other investigated samples in comparison with the standard SS316. These properties nominate this new composition in several nuclear application domains such as, nuclear shielding domain.

• Journal of Korean Vacuum Science & Technology
• /
• v.5 no.2
• /
• pp.43-46
• /
• 2001

Fe-Au alloys are characterized by the complete solubility, and exhibit an fcc-bcc structural transformation at the Fe-rich side. The magneto-optical(equatorial Ken effect : EKE) and optical properties of Fe$\_$1-x/Aux (0 < x < 1) were investigated in the 0.5 - 5.0 eV energy range. The x-ray diffraction study shows the structural fcc-bcc transformation about 80 at. % of Fe. Noticeable changes in the optical properties caused by the fcc-bcc structural transformation was observed. The shape and intensity of the EKE spectra as well as the field dependence of the magneto-optical response were also significantly changed. It is thought that these changes are mainly comes from the induced magnetic moment in Au(and/or the emhanced magnetic moment of Fe). The nature of the prominent structure observed in the UV range of the magneto-optical Ken effect of Au/Fe multilayered films are disscussed in connection with the above results.

• Journal of Powder Materials
• /
• v.22 no.1
• /
• pp.46-51
• /
• 2015

A precipitation behavior of nano-oxide particle in Fe-$5Y_2O_3$ alloy powders is studied. The mechanically alloyed Fe-$5Y_2O_3$ powders are pressed at $750^{\circ}C$ for 1h, $850^{\circ}C$ for 1h and $1150^{\circ}C$ for 1h, respectively. The results of Xray diffraction pattern analysis indicate that the $Y_2O_3$ diffraction peak disappear after mechanically alloying process, but $Y_2O_3$ and $YFe_2O_4$ complex oxide precipitates peak are observed in the powders pressed at $1150^{\circ}C$. The differential scanning calorimetry study results reveal that the formation of precipitates occur at around $1054^{\circ}C$. Based on the transmission electron microscopy analysis result, the oxide particles with a composition of Y-Fe-O are found in the Fe-$5Y_2O_3$ alloy powders pressed at 1150oC. It is thus conclude that the mechanically alloyed Fe-$5Y_2O_3$ powders have no precipitates and the oxide particles in the powders are formed by a high temperature heat-treatment.