• THE JOURNAL OF KOREAN ORIENTAL ONCOLOGY
• /
• v.1 no.1
• /
• pp.167-190
• /
• 1995

Bikiwhan is one of the oriental medicines that have been used for the treatment of tumors since ancient times. However, the mechanism of the drug action is not closely surved. This study was made to investigate the effects of Bikiwhan on the innate immunity were analysed by measuring the functions of phagocytes, and those of specific immunity were analysed by measuring T and B cells activities. The followings are the results obtained from this study : 1. Bikiwhan has direct cytotoxic effects against human lymphoma cell lines (K562) in a dose dependent manner. 2. An administration of Bikiwhan increased allogenic immune response in the mouse. 3. An administration of Bikiwhan increased the antibodies formation against SRBC. 4. An administration of Bikiwhan enhanced the apperance of rosette forming cells in the spleen. 5. An administration of Bikiwhan decreased the delayed-type hypersensitivity against dinitrofluorobenzene. 6. An administration of Bikiwhan has no effect on natural killer cells. 7. Bikiwhan increased the phagocyte activity of peritoneal macrophages in vitro and in in vivo as well. 8. Bikiwhan depressed the formation of reactive oxygen intermediated in vitro and in vivo as well. 9. Bikiwhan has the capacity to make peritoneal macrophages secrete nitric oxide. The above results demonstrate that Bikiwhan has enhancing effects of immune responses against tumors by decreasing tissue demages caused by immune responses.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.3
• /
• pp.205-215
• /
• 2002

The purpose of this study was to evaluate the tissue response in various bone grafting materials, especially xenogenous bone materials in vivo, compare of bone formation capacity of various bone grafting materials on rat skull defects and evaluate the effect of Hyaluronic acid on healing of human Demineralized Freezed Dried Bone allogenous graft (DFDBA) materials in rat calvarial defects. 30 Sprague-Dawly rats were divided into 4 groups. $7{\times}7mm$ size bony defect were artificially prepared in the calvaria (both parietal bone) of all 30 rats and follwed group grafting of autogenous bone graft on right side and allogenic DFDBA on left side bone graft (rat DFDB) in 15 control group, but in 15 experimental group, xenograft (human DFDB) on left side, hyaluronic acid treated with xenograft on right side. Sequential sacrifices was performed at 1, 2, 4, 6, 8 weeks of experiment. These specimens were stained with H&E and MT stain, and then histologic analysis under light microscope was carried out. There were inflammatory reaction in all graft material during early stage. Autogenous and Allogenous DFDBA graft group observed inflammatory reaction at 1 week. Xenograft group persistant inflammatory reaction until 4 weeks, but in HA treated xenograft group inflammatory reaction was decreased at 2 weeks. Osteoblastic activity in control group was begun at 2 week, xenograft group was delayed at 6 weeks, however HA treated xenograft group was begun at 4 weeks. At 2 week, mild osteoclastic activity were observed in all xenograft group not in concerned to HA, but there was no difference each group after 4 weeks. There are most activated angiogenesis around graft mateirals in xenograft group at 2 weeks, but in HA treated xenograft group, decreased angiogenesis was observed at same time. Bone formation and bone maturation of xenograft group, there was no difference in HA treatment, was less than control group. Fibrosis around xenograft materials were observed until 6 weeks, there was no difference between xenograft and HA treated groups.

• Korean Journal of Community Nutrition
• /
• v.7 no.4
• /
• pp.578-584
• /
• 2002

This study was designed to investigate the association between the period of engraftment and the nutritional status of patient s undergoing bone marrow transplantation for acute myelogenous leukemia (AML). Nutritional status was evaluated by body mass index (BMI), percentage of ideal body weight (PIBW), percentage of weight loss, and serum albumin, total protein (T protein), hemoglobin (HGB) and hematocrit (HCT) levels on the day prior to transplantation and on the day of bone marrow transplantation. The periods of engraftment were determined by absolute neutrophil counts (ANC) above $500/mm^3$ from the day of bone marrow transplantation. The study subjects were 80 patients (55 males, 25 females) with acute myelogenous leukemia admitted to the University Hospital in Seoul. The result of this study is as follows : Tie nutritional status values of the majority of patients on the day prior to transplantation were in the normal range except for HGB and HCT ; however, during hospitalization, all of the levels of the nutritional status values were significantly decreased. The periods of engraftment of the abnormal group according to their BMI, PIBW, HGB and HCT levels on the day of bone marrow transplantation showed no difference when compared to the normal group. However, the periods of engraftment of the abnormal group, according to the percentage of weight loss, albumin, and T protein levels were significantly decreased when compared to the normal group. Therefore, the nutritional status of patients at the time of transplant had a noticeable influence on the periods of engraftment. Our results suggested that nutritional status is a critical factor of engraftment in BMT during pre-transplant and post-transplant. Futhermore, we recommend that the process of nutritional preparation for the transplant should initiate immediately after the transplant decision has been made.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.3
• /
• pp.239-247
• /
• 2005

This study demonstrated that xenogenic human marrow mesenchymal stem cells (hMSCs) could elicit the regeneration of the sensory nerve after axotomy in the adult rats infraorbital nerves without immunosuppression. For this, we evaluated the behavioral testing for functional recovery of the nerve and histological findings at weeks 3 and 5 compared to controls. Xenogenic hMSCs did not evoke any significant inflammatory or immunologic reaction after systemic and local administrations. HMSCs-treated rats exhibited significant improvement on sensory recovery tested with von Frey monofilaments. At 5 postoperative weeks, in the hMSCs treated nerve, expression of myelin basic protein (MBP), neurofilament (NF) at the site of axotomy was higher than control. And mRNA expression of neurotropin receptor Trk precursor (TrkPre), nerve growth factor receptor (NGFR) and neuropeptide (NPY) in trigeminal ganglion were also higher. The number of myelinated nerve at distal stump and cells in trigeminal ganglion were higher in hMSC treated rats. So it was supposed that transplanted MSCs contributed to reducing post-traumatic degeneration and production of neurotrophic factors. Immunofluorescence labeling showed small portion of hMSCs (<10%) expressed a phenotypic marker of Schwann cell (S-100). Xenogenic or allogenic mesenchymal stem cells might have immune privileged characteristics and useful tool for cell based nerve repair.

• Journal of Periodontal and Implant Science
• /
• v.32 no.1
• /
• pp.173-186
• /
• 2002

The purpose of this study was to evaluate effect of platelet rich plasma on the treatment of Grade II furcation involvement, with Demineralized Freeze-Dried Bone(Dembone(R)) and bioabsorable membrane(BioMesh(R)) in humans by digital subtraction radiography. 12 teeth(control group) were treated with Demineralized Freeze-Dried Bone(Dembone(R)) and bioabsorable membrane(BioMesh(R)), and 12 teeth(test group) were treated with Demineralized Freeze-Dried Bone(Dembone(R)), bioabsorable membrane(BioMesh(R)) and Platelet Rich Plasma. The change of bone density was assessed by digital subtraction radiography in this study. The change of mineral content by as much as 5%(vol) could be perceived in the subtracted images. The change of mineral content was assessed in the method that two radiographs are put into computer program to be overlapped and the previous image is subtracted by the later one. Both groups were statistically analyzed by Wilcoxon signed Ranks Test and Mann-whitney Test using SPSS program (5% significance level). The results were as follows: 1. In test group, the radiopacity in 3 months after surgery were significantly increased than 1 month after surgery(p<0.05). However. there were no significant difference between 1 month after surgery and 3 months after surgery in control group(p>0.05). 2. In test and control group, the radiopacity in 6 months after surgery were significantly increased than 1 month after surgery(p<0.05) 3. In test and control group, the radiopacity in 6 months after surgery were significantly increased than 3 months after surgery(p<0.05). 4. There were no significant difference between test group and control group at 1 month, 3 months after surgery, but radiopacity in test group were significantly increased than control group at 6 months after surgery(p<0.05). In conclusion, Platelet Rich Plasma can enhance bone density.

• The Journal of the Korean dental association
• /
• v.48 no.4
• /
• pp.256-262
• /
• 2010

bone grafting is indicated in the case of bony defects and is classified into autograft, allograft, and xenograft. Synthetic bone graft is contrasted with these three categories in that it has a different donor source. Autograft is most prominent as it is known as a gold standard of all grafting procedures. Its principles and practices are well established via accumulated informations and clinical experiences, which imposes no regulations or restrictions in its clinical use. On the other hand, other bone graft procedures are under tight control for the safety and effectiveness of each product. Food and Drug Administration of the United States has a system in which the information on the approvals and clearances of bone graft materials on their internet homepage. All the bone graft materials that are under the regulations of the United States are classified into the category of medical devices, which includes allogenic bone, xenogenic bone, and synthetic bone graft materials. Each bone graft material has its own indication and the FDA approvals and clearances of medical devices contain the item of "intended use" to specify the indications of each bone graft materials. US dentists, as users of the specific bone graft materials, are provided with adequate information on the approved materials they are to utilize. As an user of these materials, Korean dentists are less provided with the information on the bone graft materials they want to use. Medical providers of the bone graft materials have to be able to provide their users with the essential information such as the intended use of the regulatory approval. Dentists must also be active in gathering informations on the material of their interest, and the system must be built in which both of the medical providers and users of bone graft materials can be satisfied in providing and getting the information, respectively.

• The Journal of the Korean dental association
• /
• v.53 no.1
• /
• pp.28-35
• /
• 2015

To overcome shortcoming of autogeneous, allogenic, xenogenic and alloplastic bone grafts, various growth factors related to bone regeneration have been identified and developed. Among them, rhBMP-2 is regarded as the most potent osteoinductive growth factor and it can trigger the differentiation of mesenchymal stem cells to osteogenic cells for accelerated new bone formation And several commercial products of rhBMP-2 are available in Korea. It is applied to maxillary sinus augmentation, guided bone regeneration and preservation of extraction socket. In this review, the development, action mechanism and clinical applications of rhBMP-2 will be described.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.5
• /
• pp.429-438
• /
• 2007

Transport distraction osteogenesis has been introduced recently to correct skeletal malformations and discrepancies in the maxillofacial area. To reconstruct 3-dimensitonal mandibular shape, this transport distraction can be considered with the use of reconstruction plate. A 23-years-old male having unilateral mandibular body and angle defects, who had been operated of partial mandibular resection due to unicystic ameloblastoma, was treated by transport distraction procedures with ThreadLock transport $distractor^{(R)}$ (KLS Martin Co., Germany) through the rail of reconstruction plate (Osteomed Co., USA). After being distracted 35 mm defect from mandibular angle to body, and consolidated for 16 weeks, allogenic bone graft on docking site was performed with removal of transgingival pin. For more than 13 weeks follow up period after consolidation period, gradual increase of radiopacity in the radiographic examination was shown, and the curved mandibular continuity according to the reconstruction plate was made firmly. These transport distraction osteogenesis in the mandible was able to be considered as the good and minimally invasive technique for the reconstruction of mandibular discontinuity. Young patient was also very satisfactory for these results.

• Journal of International Society for Simulation Surgery
• /
• v.3 no.1
• /
• pp.36-38
• /
• 2016

Fibrous dysplasia is a relatively rare disease but the management would be quite challenging. Because this is not a malignant tumor, the preservation of the facial contour and the various functions seems to be important in treatment planning. Until now the facial bone reconstruction with autogenous bone would be the standard. Although the autogenous bone would be the ideal one for facial bone reconstruction, donor site morbidity would be the inevitable problem in many cases. Meanwhile, various types of allogenic and alloplastic materials have been also used. However, facial bone reconstruction with many alloplastic material have produced no less complications including infection, exposure, and delayed wound healing. Because the 3D printing technique evolved so fast that 3D printed titanium implant were possible recently. The aim of this trial is to try to restore the original maxillary anatomy as possible using the 3D printing model, based on the mirrored three dimensional CT images based on the computer simulation. Preoperative computed tomography (CT) data were processed for the patient and a rapid prototyping (RP) model was produced. At the same time, the uninjured side was mirrored and superimposed onto the traumatized side, to create a mirror-image of the RP model. And we molded Titanium mesh to reconstruct three-dimensional maxillary structure during the operation. This prefabricated Titanium-mesh implant was then inserted onto the defected maxilla and fixed. Three dimensional printing technique of titanium material based on the computer simulation turned out to be successful in this patient. Individualized approach for each patient could be an ideal way to restore the facial bone.

• Journal of International Society for Simulation Surgery
• /
• v.1 no.2
• /
• pp.99-102
• /
• 2014

The skull defect can be made after the trauma, oncologic problems or neurosurgery. The skull reconstruction has been the challenging issue in craniofacial fields for a long time. So far the skull reconstruction with autogenous bone would be the standard. Although the autogenous bone would be the ideal one for skull reconstruction, donor site morbidity would be the inevitable problem in many cases. Meanwhile various types of allogenic and alloplastic materials have been also used. However, skull reconstruction with many alloplastic material have produced no less complications including infection, exposure, and delayed wound healing. Because the 3D printing technique evolved so fast that 3D printed titanium implant were possible recently. The aim of this trial is to try to restore the original skull anatomy as possible using the 3D printed titanium implant, based on the mirrored three dimensional CT images based on the computer simulation. Preoperative computed tomography (CT) data were processed for the patient and a rapid prototyping (RP) model was produced. At the same time, the uninjured side was mirrored and superimposed onto the traumatized side, to create a mirror-image of the RP model. And we fabricated Titanium implant to reconstruct three-dimensional orbital structure in advance, using the 3D printer. This prefabricated Titanium-implant was then inserted onto the defected skull and fixed. Three dimensional printing technique of titanium material based on the computer simulation turned out to be very successful in this patient. Individualized approach for each patient could be an ideal way to manage the traumatic patients in near future.