• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.1915-1919
• /
• 2003

A practical method of adaptive rate allocation to source and channel codings for an independent loss channel is proposed for Internet video. It is based on the observations that the values of residual loss probabilities at the optimal code rates for different packet loss probabilities are closely clustered to the average residual loss probability for a transmission frame size n in RS(n,k) code and for a total bit rate R. These observations aye then exploited to find the code rate for maximum PSNR. Simulation results demonstrate that the proposed method achieves a near-optimal bit-rate allocation in the joint source-channel coding of H.263 and RS(n,k) codings.

• The Journal of Korea Robotics Society
• /
• v.11 no.4
• /
• pp.217-225
• /
• 2016

Dynamic Positioning (DP) is used to automatically maintain the position and heading of a floating structure subjected to environmental disturbances. A DP control system is composed of a motion controller to compute the desired force and moment and a thrust allocator to distribute the computed force and moment to multiple thrusters considering mechanical and operational constraints. Among various thruster configurations, azimuth thrusters or propeller/rudder pairs tend to make the allocation problem difficult to solve, because these types of propulsion systems include nonlinear constraints. In this paper, a dynamic positioning strategy for a twin-thruster ship that is propelled by two azimuthing thrusters is addressed, and a thrust allocation method which does not require a numerical optimization solver is proposed. The applicability of the proposed method is demonstrated with an experiment using an autonomous boat.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.2
• /
• pp.107-118
• /
• 2010

This paper proposes a digital forensic method to a file creation transaction using a journal file($LogFile) on NTFS File System. The journal file contains lots of information which can help recovering the file system when system failure happens, so knowledge of the structure is very helpful for a forensic analysis. The structure of the journal file, however, is not officially opened. We find out the journal file structure with analyzing the structure of log records by using reverse engineering. We show the digital forensic procedure extracting information from the log records of a sample file created on a NTFS volume. The related log records are as follows: bitmap and segment allocation information of MFT entry, index entry allocation information, resident value update information($FILE_NAME, $STANDARD_INFORMATION, and INDEX_ALLOCATION attribute etc.).

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.1
• /
• pp.8-14
• /
• 2007

This paper addresses the allocation planning of the storage location in a warehouse system that the dedicated storage method is used. In the discrete finite time period model, the demands for storage location of products are dynamic for time periods. The planning is to determine the reallocation time period and the storage location of the products in reallocation time period, which minimizes costs. The cost factors are the reallocation cost, the travel cost within warehouse and the surplus storage location cost. A model is formulated, and the property of optimal solution is characterized. The dynamic programming algorithm is developed, and a numerical example is shown.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.8
• /
• pp.794-799
• /
• 2012

The international standard, ISO-11783, was designed for the communication within an agriculture machinery. Even if it is based on the CAN (Control Area Network) protocol, its extended features which include point-to-point communication and large data transmission support show different network performance from the standard CAN. This paper proposes a dynamic priority allocation method to improve the real-time performance of ISO-11783. Computer simulation shows reduction of the deadline-missed cases and community latency via proposed algorithm.

• Journal of Internet Computing and Services
• /
• v.24 no.5
• /
• pp.1-7
• /
• 2023

This paper proposes a small cell resource partitioning allocation method to solve interference to machine type communication devices (MTCD) and improve performance in 5G heterogeneous networks (HetNet) where macro base station (MBS) and many small cell base stations (SBS) are overlaid. In the 5G HetNet, since various types of MTCDs generate data traffic, the load on the MBS increases. Therefore, in order to reduce the MBS load, a cell range expansion (CRE) method is applied in which a bias value is added to the received signal strength from the SBS and MTCDs satisfying the condition is connected to the SBS. More MTCDs connecting to the SBS through the CRE will reduce the load on the MBS, but performance of MTCDs will degrade due to interference, so a method to solve this problem is needed. The proposed small cell resource partitioning allocation method allocates resources with less interference from the MBS to mitigate interference of MTCDs newly added in the SBS with CRE, and improve the overall MTCD performace using separating resources according to the performance of existing MTCDs in the SBS. Through simulation results, the proposed small cell resource partitioning allocation method shows performance improvement of 21% and 126% in MTCDs capacity connected to MBS and SBS respectively, compared to the existing resource allocation methods.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.6
• /
• pp.924-931
• /
• 2008

This paper presents a buswise transmission loss allocation algorithm utilizing the transaction strategy. We prove that whatever calculated by any transaction strategy, the total of the allocated transmission losses of each bus, including no-load loss allocation, almost equals the total loss of AC power flow algorithm and the loss is perfectly slackbus-independent. In this paper, the allocated transmission losses of each bus is calculated by the method of integrating loss sensitivities using by the load level parameter ${\lambda}$. The performance of the proposed algorithm is evaluated by the case studies carried out on the WSCC 9-bus and IEEE 14-bus systems.

• Journal of Agricultural Extension & Community Development
• /
• v.5 no.1
• /
• pp.93-102
• /
• 1998

The objectives of the study were 1) to make the reasonable standard, 2) to select the objective and scientific method and process for the location-allocation of a new provincial capital city. The Main standard of location-allocation were suggested as follows ; 1) Integration of province 2) Convenience of Administration service 3) Accomodations of new provincial capital city 4) Balanced development by region. The validity of location-allocation were reviewed the population potentials and nodal accessibilities. The population potential was examined to find the maximum point of administrative demand, and the locationallocation model was examined to find the minimum point of the aggregated travel-cost to a proposed provincial government office. The nodal accessibilities measured in travel-time distance and actual values. Two major concerns in locating public facilities are efficiency and equity.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.16 no.4
• /
• pp.15-24
• /
• 2010

The purpose of this study is to provide the basic guideline of the archite-ctural planning and design of the women's hospital for optimizing the area compostion and spatial allcoation. The method of this study is to investigate and analyze the functional spatial composition based on the area composition and spatial allocation of the 4 departments space in women's hospital through a analysis of 9 cases study. Data collecting skills such as drawing documents analysis, field survey and observation were used to examine of the present facility condition. Hence this research is to grasp the present condition of department of the women's hospital, to inquire the area composition and spatial allocation. Finally, The derived important factors are expected to use as the basic data at the time of planning for the space programing of design women's hospital.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.6
• /
• pp.409-416
• /
• 2012

Most of the shipbuilding scheduling researches so far have been conducted with stress on the dock plan. That is due to the fact that the dock is the least extendable resource in shipyards and its overloading is difficult to resolve. However, once the dock scheduling is completed, it is also important to make a plan that make the best use of the rest of the resources in the shipyard, so that any additional cost is minimized. This study automates block allocation process by analyzing the existing manual process that designates production bays for the blocks during the midterm planning. Also, a planning scenario validation method is suggested, where block allocation scenarios based on diagrams are edited and simulated.