• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.544-547
• /
• 2007

Because data processing systems in recent years are more complicated, main function of the data processing is divided as several sub-functions which are implemented and verified in each subsystem of the data processing system. For the verification of data processing system, many interface tests among subsystems are required and also a lot of simulation systems are demanded. This paper proposes CTHS (Common Test Harness System) for satellite ground segment development which has all of functions for interface test of the data processing system in one PC. Main functions of the CTHS software are data interface, system log generation, and system information display. For the interface test of the data processing system, all of actions of the CTHS are executed by a pre-defined operation scenario which is written by purpose of the data processing system test.

• 의료법학
• /
• 제15권2호
• /
• pp.91-122
• /
• 2014

For a variety of reasons, the number of medical disputes is continuously rising. Due to the intrinsic qualities of medical treatments, one would find it more apt to subject medical disputes to general conflict resolution procedures rather than to once-for-all decisions under legal suits. To address the increasing medical disputes with greater professionalism and efficiency, the Medical Disputes Mediation Act was enacted and a medical dispute mediation system put in place, while drawbacks have been blamed to both. The current mediation procedures require the respondent's agreement as a disclosure requirement. A reasonable improvement to this would be to amend the regulation of agreement supposition, or to enforce procedural participation only to public health facilities managed by the national or regional government. Furthermore, small claims cases of 20 million KRW or less in claim may be considered for conciliation-prepositive principle. The concentration on small claim medical disputes is a phenomenon that can be addressed by carrying out maximum authentication commissions or similar measures, one of the solutions by enhancing the public trust in the Korea Medical Dispute Mediation and Arbitration Agency. The proper management of medical authentication teams is one way to address the existing problems in the authentication system. For this, the number of team members shall be increased under more flexible authentication procedures. All indemnity resources for medical accidents of force majeure must be borne by the Government, for it is the body principally responsible for social compensation. Placing this cost on the establisher of the subject medical facility holds the possibility of violating fundamental rights. While the costs for subrogation payment system for damages may be borne by the healthcare facility establisher, a deposit-based system must be created for cases in which the facility shuts down, without holding the responsibility for accident cause. Such change to a deposit-based system will evade the controversies of unconstitutionality, etc.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.605-607
• /
• 1997

According to the way of the robot control, the robot systems of all the teams which participate in the MIROSOT can be divided into three categories : the remote brainless system, the vision-based system and the robot-based system. The MIRAGE I robot control system uses the last one, the robot-based system. In the robot-based system the host computer with the vision system transmits the data on only the location of the ball and the robots. Based on this robot control method, we took part in the MIROSOT '96 and the MIROSOT '97.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.110-140
• /
• 1998

One of the problems facing in all modern dental hospitals is the much efforts, manpower and space are needed to effectively sort and stack patients' charts of the various dental departments. In addition, the storage and prompt arrangement of x-ray films is also a problem. Therefore, if dental charts as well as films could be computerized, it would be easier to store and keep them; by data basing, many space, manpower and cost would be saved: data could also be effectively managed for the purpose of academic researches. This would be an epoch -making event in the development of dental hospital management. The purpose of this study is to develop a dental information processing program, that will be used to store dental treatment records and digital image data using a new record media, the optical card. The patients' charts from the dental hospital were selected. The treatment records of the chart were put into the treatment data -recording area of the program, and the digital images of various dental x-ray films were made with a scanner. These data were stored in the optical card and analyzed to get the following results: 1. In this program it is possible to put treatment records and image data into and out from the optical card, and it is impossible to correct and delete all data recorded on the optical card. 2. All data in the optical card system can be searched and analyzed on database. 3. The resolution of image data stored in optical card is above 5.9 lp/mm. 4, All data of dental charts used as samples, stored to optical cards, occupies average 14%, In conclusion, with the development of the storage system using the optical card, a dental patient's life-time treatment record can be stored in one optical card and used as a substitute for the dental chart.

• Journal of Biosystems Engineering
• /
• 제26권5호
• /
• pp.481-486
• /
• 2001

To increase the production efficiency in dairy industry, proper artificial insemination is the most important operation. For the successful artificial insemination, accurate estrus detection is required. The Korean dairy farmers usually depended on visual observation for estrus detection of cows. Mounting behaviour is one of major inidications observed when cows are at an estrus. A mounting activity detection system for cows using radiotelemetry was developed. This system included a transmitter with a pressure switch, a receiver, a serial communication interface, a personal computer and a computer software. All components and a whole system were tested both in a laboratory and in a farm. The results of this study are as follows: 1. All components including transmitter, receiver and serial interface were operated according to the design specification. 2. A whole system tested with simulated mounting activity of 400 times showed 100% of success rate. 3. In the farm test for 4 days with three cows expecting estrus, one cows experiencing mounting activities showed correct response with this system. However two cows did not show mounting activities because of weak estrus and cold weather during the testing period.

• 한국운동역학회지
• /
• 제14권2호
• /
• pp.69-83
• /
• 2004

The purpose of this study is searching for technical merits and demerits of each weight lifting player through qualitative motion analysis system. Moreover, It is also analysis the repeating the establishment of exercise purpose and studying for the effect of the field adaptation. The subject of this study was five male weight lifting players who have been engaged in Korean Delegation Team. The institution of exercise target was made through two times qualitative analysis and the result of studying for the effect of the field adaptation was produced before offering feedback. Moreover, two time analysis added after offering feedback. All analysis was based on 2-D visual analysis. The results of this study are as follows: 1. Maximal barbell moving speed in starting phase was decreased after offering feedback. This result implies advancement of technical skills after offering feedback. 2. From starting posture to 앉아받기, forward and backward moving distance of hip joint was decreased after offering feedback in all subjects. This result represents advancement of technical skills after offering feedback. 3. In terms of pull phase, forward and backward moving distance of hip and shoulder joint was decreased after offering feedback in all subjects. This result represents advancement of technical skills after offering feedback. 4. In terms of pull phase, the difference of horizontal value of coordinates was decreased after offering feedback in all subjects. This result represents advancement of technical skills after offering feedback. 5. In terms of pull phase, the motion range of hip joint was decreased after offering feedback in three of five subjects and this represents advancement of technical skills after offering feedback. However, the rest of them were not variable or narrow decreasing. This result represents that feedback system could not brought tremendous effects. 6. From apex point of barbell to 앉아받기, the difference of barbell height was decreased after offering feedback in three of five subjects and this represents advancement of technical skills after offering feedback. However, the rest of them weren't variable or narrow increasing. This result represents that feedback system could not brought tremendous effects. 7. In terms of last-pull phase, the angular velocity of knee joint was increased after offering feedback in four of five subjects and this represents advancement of technical skills after offering feedback. However, the rest of them, only one subject, decreased. This result represents that feedback system could not brought tremendous effects. 8. In terms of last-pull, the conversional tendency of maximal extension to flextion came out all but simultaneously without offering feedback in four of five subjects. This is well-performed technique. Only one subject, however, could not use power effectively because the fact that his maximal extension came out in serial, from ankle to knee and waist means dispersion of power. In addition to, after offering feedback, only one subject made increasing the maximal extension of knee in last-pull and this result represents advancement of skills after offering feedback. However, the rest of them could not make meaningful development after offering feedback. 9. It might be assumed that searching for technical merits and demerits of each weight lifting player through qualitative motion analysis system could improve player's skill.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.199-202
• /
• 2009

Scan design is currently the most widely used structured Design For Testability approach. In scan design, all storage elements are replaced with scan cells, which are then configured as one or more shift registers(also called scan chains) during the shift operation. As a result, all inputs to the combinational logic, including those driven by scan cells, can be controlled and all outputs from the combinational logic, including those driving scan cells, can be observed. The scan inserted design, called scan design, is operated in three modes: normal mode, shift mode, and capture mode. Circuit operations with associated clock cycles conducted in these three modes are referred to as normal operation, shift operation, and capture operation, respectively. In spite of these, scan design methodology has defects. They are power dissipation problem and test time during test application. We propose a new methodology about scan shift clock operation and present low power scan design and short test time.

• Environmental Analysis Health and Toxicology
• /
• 제18권3호
• /
• pp.183-191
• /
• 2003

Although the variety and quantities of chemicals used have been increasing, no management strategies have been developed for these chemicals in our country. Therefore, it is important to identify the hazardous characteristics of chemicals and establish reasonable and effective management plans for them. However, because insufficient resources are available to evaluate all aspects of many varieties of chemicals, studies on suitable chemical ranking and scoring (CRS) system should be performed to ensure effective screening of priority chemicals.. In addition, because most CRS systems have their own goals, it is impossible for only one generic system to be consistent with all the uses that have been developed. Therefore, priority systems should be developed with specific and clearly defined purposes in our nation. In this study, we investigated and discussed exist-ing CRS systems, and proposed several elements and principles when designing CRS systems. First of all, the system should have clearly defined goals, keep neutral, and employ simple methods. In addition, researchers need to perform sensitivity analysis to find the main variables responsible for uncertainties and use the tiered approach to compose the effective management strategies for chemicals.

• 대한소아치과학회지
• /
• 제35권3호
• /
• pp.456-468
• /
• 2008

본 연구는 5급 와동에서 유동성 복합 레진 수복 시 수종의 상아질 접착제에 따른 미세 누출 양상을 비교하고, resin tag 및 혼성층의 형상을 전자 현미경으로 관찰하고 비교 분석하였다. 행동 조절에 어려움이 많은 소아 환자의 접착 수복에서 술식의 간편화 및 시간 단축이 장점으로 부각되고 있는 All-in-one 상아질 접착제의 임상 적용 가능성을 평가하고 다음과 같은 결론을 얻었다. 1. 법랑질 변연에서는 II군(AQ Bond Plus)이 가장 높은 미세누출을 보였고 III군($AdheSE^{(R)}$ One), I군($Adper^{TM}$ Single Bond 2) 순으로 감소하였으며, II군은 I군, III군과 통계학적 유의차를 보였고(p<0.05), I군과 III군 사이에는 유의차가 없었다. 2. 상아질 변연에서는 II군, I군, III군의 순으로 미세누출이 증가하였고, 각각 통계학적 유의차를 보였다(p<0.05). 3. I군과 III군에서는 법랑질 변연이 상아질 변연보다 유의하게 낮은 미세누출을 보였으나(p<0.05), II군에서는 통계학적 유의차를 보이지 않았다(p>0.05). 4. 주사전자현미경 소견에서 II군과 III군은 resin tag의 형성이 매우 미약하고 불규칙한 양상을 보인 반면, I군에서는 비교적 긴밀하고 균일한 resin tag가 관찰되었다. 이상의 결과를 종합해보면, AQ Bond Plus와 $AdheSE^{(R)}$ One은 처리 과정의 단순화로 인한 시간 절약의 장점을 가지고 있으나 $Adper^{TM}$ Single Bond 2에 비해 상대적으로 높은 미세누출과 약한 결합력을 보인 본 실험의 결과를 미루어 볼 때, 임상적용 시 술식과 case에 따른 선택적 사용이 추천되는 바이다.

• International Journal of Contents
• /
• 제11권4호
• /
• pp.38-43
• /
• 2015

Non-orthogonal multiple access (NOMA) where all users share the entire time and frequency resource has paid attention as one of the key technologies to enhance the spectral efficiency and the total throughput. Nevertheless, as the number of users and SIC error increase, the inter-user interference and the residual interference due to the SIC error also increase, resulting in performance degradation. In order to mitigate the performance degradation, we propose grouping-based NOMA system. In the proposed scheme, all users are divided into two groups based on the distance between the BS and each user, where one utilizes the first half of the bandwidth and the other utilizes the rest in the orthogonal manner. On the other hand, users in each group share the spectrum in the non-orthogonal manner. Grouping users can reduce both the inter-user interference and residual interference due to the SIC error, so it can outperform conventional NOMA system, especially in case that the number of users and the SIC error increase. Based on that, we also present the hybrid operation of the conventional and the proposed NOMA systems. In numerical results, the total throughput of the proposed NOMA systems is compared with that of the conventional NOMA systems with regard to the number of users and SIC error. It is confirmed that the proposed NOMA system outperforms the conventional NOMA system as the number of users and the SIC error increase.