• Journal of Yeungnam Medical Science
• /
• v.24 no.2
• /
• pp.275-286
• /
• 2007

Background : Acute renal failure is one of the leading causes of postoperative morbidity and mortality. The purpose of this study was to determine the risk factors that are associated with acute renal failure after colorectal surgery. Materials and Methods : Five hundred seventy patients who operated colorectal surgery at the Yeungnam University Medical Center over three years from 2004 to 2006 were enrolled in this study. The effects of gender, age, ASA classification, concomitant disease, surgery type and duration, reoperation, urogenital manipulation, medication, hypotension, hypovolemia, transfusion, and postoperative ventilatory care on the occurrence of acute renal failure after colorectal surgery were studied. Results : The major risk factors of acute renal failure after colorectal surgery were age of patients (P=0.003), ASA classification (P<0.001), concomitant disease (P<0.001), duration of the time surgery (P=0.034), reoperation (P=0.001), use of intraoperative diuretics (P=0.005), use of postoperative diuretics (P<0.001), intraoperative hypotension (P=0.018), intraoperative transfusion (P<0.001), postoperative transfusion (P<0.001), and postoperative ventilatory care (P=0.001). Conclusion : Multiple factors cause synergistic effects on the development of acute renal failure after colorectal surgery. Therefore, efforts to reduce the risk factors associated with acute renal failure are needed. In addition, intensive postoperative care should be provided to all patients.

• Restorative Dentistry and Endodontics
• /
• v.25 no.4
• /
• pp.499-508
• /
• 2000

The purposes of this study were to evaluate the validity of 2 kinds of digital radiography techniques in evaluating the radiopacity comparison of restorative materials and to determine the relative radiopacities of several kinds of compomer and flow able resin using these techniques. After taking radiographs of an aluminum step wedge, con-elation of optical density calibration curves were evaluated between conventional radiography with transmission densitometer and CD-Dent digital radiography (storage phosphor system) and between conventional one and RVG$^{(R)}$ digital radiography (CCD system). Compomers such as Dyract$^{(R)}$ AP, Compoglass$^{(R)}$, and Dyract flow$^{(R)}$, and flowable resins such as Ultraseal-XT$^{(R)}$ plus$^{TM}$, Revolution$^{TM}$, Aeliteflo$^{TM}$ and Tetric-flow$^{(R)}$ were used. Five specimens of 5mm in diameter and 2 mm thick were fabricated with each material. Radiopacities of the materials were measured using the above radiographic techniques and compared. The results were as follows: 1. When the optical density calibration curves were compared, conventional radiography and both CD-Dent and RVG$^{(R)}$ digital radiographies showed very high inverse correlations (${\gamma}$=-0.95, ${\gamma}$=-0.98 ; p<0.05). 2. All the tested restorative materials showed levels of radiopacity the same as or greater than that of dentin (p<0.05), Radiopacities of Dyract$^{(R)}$ AP, Compoglass$^{(R)}$, and Tetric flow$^{(R)}$ were greater than those of Revolution$^{TM}$, Aeliteflo$^{TM}$, or dentin (p<0.05). 3. Radiopacities of Dyract$^{(R)}$ AP, Compoglass$^{(R)}$, and Tetric flow$^{(R)}$ were shown to be greater than that of enamel when conventional radiography and CD-Dent digital radiography were used (p<0.05). Radiopacity of Dyract flow$^{(R)}$ was shown to be greater than that of Enamel when conventional radiography was used (p<0.05).

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.45-50
• /
• 2002

The 'hands-on' craftsmanship of the 20th century has came and gone. Today, we are dealing with whole new, 'cerebral approach,' to concept and design with this new approach, design and function are very much dependant upon planning, sales, promotion, and the formative technique of the design industry. The innovative process of design constantly change as it reflects the needs and wants of society. It is and industry that constantly change as it reflects the needs and wants of society. It is and industry that constantly remakes and reshapes itself to suit current trend and outlook. The current idea being that consumers are looking for quality over quantity. Due to the 20th centuries dominant philosophy of functionalism, production intended to standardize the individual's purchasing choice. Aesthetic, or philosophic qualities played a second fiddle to the functional bias of a product, With production, Marketing, and research and development are integrated into the management process. This translates as good which include efficiency, quality, durability, and credibility an trademark and style. There is a definite 'post-modernist' movement and style in 21st century. Every possibility is available as the old boundaries of the 20th century are laid aside. There is a new, transformative quality to the current paradigm of design. The old "should" and "should not" of design no longerapplies. The integrated rative of design solves the usual disparity between aesthetic qualities and production. Design and profirability need not be stranger to one another. It can differentiate the image perceived of both enterprises and consumers by making use of integrated goods services. With an integrated system. both producers and designers win. While design gets full access to design in turn. All consumers make decisions based upon the evaluation of quality, service, and image ; even though it may not be a conscious decision to do so. Consumers are fully integrated human beings ; therefore producers who apply the new, integrated paradigmatic approach to concept, design, and production will reap the harvest of making a true relationship with individual buyer.

• Journal of Distribution Science
• /
• v.14 no.3
• /
• pp.55-62
• /
• 2016

Purpose - Average using time of smart-phone for Korean people is 3 hours 39 minutes and most people who are using a computer at home and their workplace can be affected over force to neck and shoulder due to unstable body posture. musculoskeletal disorders which caused by unstable body posture can affect strongly to decrease work efficiency. So this research is designed to measure the effect of using computer & smart-phone on decreased work efficiency due to musculoskeletal disorders and mediating effect between decreased work efficiency and musculoskeletal disorders. Research Design, Data, and Methodology - The author has developed a questionnaire with 6 hypothesis on the basis of previous research result with 5 constructs. The questionnaires were also made by interview and E-mail. 300 copies of questionnaires were distributed and 282 questionnaire were used for the analysis as valid data responses. SPSS ver.21.0 were used and made Cronbach's α and reliability test, correlation, Baron & Kenny 3 step mediated regression analysis. Result - Cronbach's α shows 0.770~0.954 and C.R. is 0.963~0.997 which is higher than 0.7. and AVE was 0.867~0.933. So the data are all acceptable condition. Using for a long time of a computer & smart-phone has a positive effect on musculoskeletal disorders. This means, it can cause musculoskeletal disorders if people use a computer & smart-phone for a long time due to unstable body posture. And musculoskeletal disorders can effect strongly decrease work efficiency. This study also found out that a long time of using computer can cause musculoskeletal disorders rather than using smart-phone a long time. To check mediate effect of musculoskeletal disorders between using a computer & smart-phone and Decreased Work Efficiency, author used 3-step mediated regression analysis of Baron & Kenny (1986). Using a computer for a long time mediate partially and using a smart-phone for a long time mediate completely. This means that using a smart-phone a long time is not the actual reason to decrease work efficiency. But using level of smart-phone is increasing rapidly day by day. So we need to make additional research about this matter seriously. Conclusion - Nowadays, people can not live on without a computer & smart-phone even a moment. But, using a computer for a long time will affect to cause musculoskeletal disorders and it will effect strongly to decrease work efficiency. Before, we thought over that musculoskeletal disorders were diseases of elder people. But, we found out from this study that musculoskeletal disorders can be happen to any people, even children, or workers in heavy industry or engaged in brain work. So we need to be careful when we use a computer for a long time. People also need to be careful to keep correct body posture when using both a computer and smart-phone since a smart-phone became more popular and using time level became longer. Due to increased income and living standard of people, physical growth of young people is so rapid. But the physical environment of society is not suitable for them since it can not follow up the speed of growth. Suitable work table is very important to prevent musculoskeletal disorder which can affect decrease work efficiency. For a person, a society or country, increased productivity is very important since it can directly connected to the job satisfaction. Education and reeducation for the people is also important, but to teach them how to keep good condition of health will be more important since it can increase the quality of work efficiency and quality of life. Computer and Smart-phone is one the best invention of modern society, but it can cause mental and physical disease which can affect decrease work efficiency and productivity. So it is necessary to observe attentively for the situation continually.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.3
• /
• pp.185-191
• /
• 1974

Incubation and pot studies were conducted with upland soils for a study on determination of the lime requirement based on exchangeable alumium content. The results obtained are as follows; 1. Results of chemical analysis of upland soils show that pH varies from 5.0 to 5.4, and exchangeable Al moves with the range of 1.3-3.0m.e/100gr. Exchangeable Al decreases with years of cultivation. 2. Incubation studies shows that on acid mineral soils almost all exchangeable Al, on average 95% was neutralized with the lime to neutralized 100% exchangeable Al. On volcanic ash soil, however, only 65.5% was neutralized with the lime estimated to neutralize the equivalent of 200% exchangeable Al. The latter has required more lime. 3. The pH of mineral soils is on the average increased from an initial 5.2 to 6.3 when 95% of exchangeable Al is neutralized, whereas that on volcanic ash soil is increased from an initial 5.3 to 5.5 only when lime is applied at rate to neutralize the equivalent of 200% exchangeable Al. 4. A high correlation coefficient (r=0.99) was obtained between exchangeable Al and exchangeable acidity. This indicates that exchangeable acidity is primarly a result of exchangeable Al. 5. In pot experiments with soybean cultivated on one of the hill land soils (Songjoong soil) the application of fused phosphate and triple superphosphate based on a 5% saturation rate ($P_2O_5$ 32.1 kg/10a) showed that the liming factor for calculation of the optimum lime requirements based on exchangeable acidity was 0.594 for fuses phosphate or 1.132 for tripple superphosphate, and optimum pH is approximately 6.0 and optimum neutralization rate of exchangeable Al is 80-90%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.2
• /
• pp.201-207
• /
• 1987

This experiment was conducted to identify the superior corn hybrids for silage production and to determine the combining ability of their parental inbred lines. A 7-entry diallel cross was evaluated for grain and stover yields, and agronomic characters under 3 different seasons. Hybrids Hi34 x Tx601, Hi26 x Hi34, and Hi29 x Hi34 showed high total dry matter yields. In general, late maturing hybrids had higher grain and silage yields than early maturing hybrids. Leaf area index was correlated with grain and stover yields. Rust rating was negatively correlated with yields and all characters, indicating that rust (Puccinia sorghi) was one of the major factors affecting yields. Diallel analysis showed that inbred Hi34 which was late in maturity and resistant to rust was the best combiner for both grain and silage yields. General combining ability (GCA) and specific com-bining ability (SCA) effects for yields and other characters were significant, suggesting that both additive and non-additive gene effects are involved for those characters. Ratio of GCA/SCA mean squares showed that GCA effects were more important than SCA effects for yields and other characters. GCA x season and SCA x season interactions were significant for grain and stover yields, revealing that gene effects were not stable for those yields under dissimilar environments.

• Journal of Animal Science and Technology
• /
• v.55 no.3
• /
• pp.185-194
• /
• 2013

Microsatellite markers have been a useful genetic tool in determining diversity, relationships and individual discrimination studies of livestock. The level of genetic diversity, relationships among two Korean indigenous chicken brand populations (Woorimatdag: WR, Hanhyup3: HH) as well as two pure populations (White Leghorn: WL, Rhode Island Red: RIR) were analyzed, based on 26 MS markers. A total of 191 distinct alleles were observed across the four chicken populations, and 47 (24.6%) of these alleles were unique to only one population. The mean $H_{Exp}$ and PIC were estimated as 0.667 and 0.630. Nei's $D_A$ genetic distance and factorial correspondence analysis (FCA) showed that the four populations represented four distinct groups. However, the genetic distance between each Korean indigenous chicken brand (WR, HH) and the pure population (WL, RIR) were threefold that among the WR and HH. For the STRUCTURE analyses, the most appropriate number of clusters for modeling the data was determined to be three. The expected probabilities of identity among genotypes of random individuals (PI) were calculated as $1.17{\times}10^{-49}$ (All 26 markers) and $1.14{\times}10^{-15}$, $7.33{\times}10^{-20}$ (9, 12 with the highest PI value, respectively). The results indicated that the brand chicken breed traceability system employing the own highest PI value 9 to 12 markers, and might be applicable to individual identification of Korean indigenous chicken brand.

• Journal of The Korean Association For Science Education
• /
• v.35 no.2
• /
• pp.313-323
• /
• 2015

The purpose of this study is to investigate the cognitive process of student's modeling on a modeling-emphasized argument-based general chemistry experiment. The participants were twenty-one freshman students. Six topics were carried out during the first semester and semi-structured interview was implemented at the end of the semester. Semi-structured interview questions were used to elicit elements of effective model, modeling strategies, difficulties that students have experienced during modeling, and resolving the difficulties that students have experienced during modeling. All student interview data were collected and transcribed. The results of this study are summarized as follows: (1) Elements of effective model were considered to be visual expression, persuasive explanation, and rhetorical structure. (2) Modeling strategies included arranging important keywords or writing the outline, and during the modeling process, students used various data, suggested data after reconstructing, suggested definitions and explanations of core concepts, used meta-cognition, and considering rhetorical structure. (3) Difficulties students have experienced during modeling could be categorized as lack of modeling strategy and understanding. (4) Resolving difficulties students have experienced during modeling could be categorized as modeling strategy and understanding. Students learn the strategy by feedback, modeling experience, evaluation of experimental report, models which they constructed previously and references, and the understanding of contents were achieved through arguments which occurred during classes and during the process of writing the experimental reports. These results suggest that when using modeling in teaching and learning, the argument-based learning strategy can be effective in enhancing students' modeling by helping them to understand meta-modeling with scientific concepts.

• Sleep Medicine and Psychophysiology
• /
• v.20 no.2
• /
• pp.69-74
• /
• 2013

Introduction: Although it is well known that medical students are not getting an adequate amount of sleep, there have been only a few studies on the sleep patterns of medical students and the related factors. Therefore, the present study aimed to investigate the medical students' sleep patterns and the related factors. Methods: A questionnaire package was administered to the $1^{st}$ to $4^{th}$ year medical students at one medical school. It consisted of questions asking about their lifestyles as well as Pittsburgh sleep quality index (PSQI), Epworth sleepiness scale (ESS), global assessment of recent stress scale (GASS), the center for epidemiologic studies-depression scale (CES-D), and Moudsley obsessive-compulsive inventory (MOCI). A total of 352 students (206 males and 146 females) responded to the survey and the result was analyzed using the independent t-test, the chi-square test, the paired t-test, Pearson's correlation and ANOVA. p-values of less than 0.05 were considered statistically significant in analyses. Results: The weekend bedtime was significantly delayed (0 : 49 on weekday ; 1 : 34 on weekend ; t=-5.23, p<0.001), the weekend rise time was delayed (6 : 58 on weekday ; 9 : 30 on weekend ; t=-24.48, p<0.001) and the total sleep time was increased on weekends (5 : 36 on weekday ; 7 : 39 on weekend ; t=15.94, p<0.001). The PSQI score of all subjects was 6.43{\pm}2.64. PSQI was positively correlated with ESS (r=0.383, p<0.001), GASS (r=0.326, p<0.001), CES-D (r=0.393, p< 0.001), and MOCI (r=0.247, p<0.001), but not with GPA (r=0.072, p=0.228. The more senior students had lower PSQI, GASS, CES-D, and MOCI score (p<0.05). Conclusion: Medical students were experiencing a lack of sleep during weekdays as they have a later bedtime and earlier rise time, and consequently had more hours of sleep on weekends. Overall, the medical students were experiencing poor sleep quality and sleep deprivation. Poor sleep quality is associated with psychological problems (daytime sleepiness, stress, depression, and obsessive tendency).

• The korean journal of orthodontics
• /
• v.40 no.5
• /
• pp.294-303
• /
• 2010

Objective: This study was designed to measure the surface roughness at the slot floor of various ceramic brackets. Methods: One kind of stainless steel bracket ($Succes^{(R)}$), two kinds of monocrystalline brackets (Inspire $Ice^{(R)}$, $Perfect^{(R)}$) and two kinds of polycrystalline brackets (Crystalline $V^{(R)}$, $Invu^{(R)}$) were examined. Atomic force microscopy (AFM) was used to measure the surface roughness of each bracket. Data acquisition and processing were performed using $SPIP^{TM}$. Results: The differences in values of Sa, Sq, and Sz in $Invu^{(R)}$ and Inspire $Ice^{(R)}$ were not statistically different from the control group $Succes^{(R)}$. The values of Sa, Sq, and Sz of $Perfect^{(R)}$ and Crystalline $V^{(R)}$ were greater than those of $Succes^{(R)}$. Differences of all the Sa, Sq, and Sz values between $Perfect^{(R)}$ and Crystalline $V^{(R)}$ were not statistically significant. Conclusions: It is concluded that the slot surfaces of $Succes^{(R)}$, Inspire $Ice^{(R)}$, and $Invu^{(R)}$ were smooth compared to those of Crystalline $V^{(R)}$ and $Perfect^{(R)}$.