• Journal of Microbiology and Biotechnology
• /
• 제21권7호
• /
• pp.703-710
• /
• 2011

Enzymatic saccharification of corn stover using Phanerochaete chrysosporium and Gloeophyllum trabeum and subsequent fermentation of the saccharification products to ethanol by Saccharomyces cerevisiae and Escherichia coli K011 were achieved. Prior to simultaneous saccharification and fermentation (SSF) for ethanol production, solid-state fermentation was performed for four days on ground corn stover using either P. chrysosporium or G. trabeum to induce in situ cellulase production. During SSF with S. cerevisiae or E. coli, ethanol production was the highest on day 4 for all samples. For corn stover treated with P. chrysosporium, the conversion to ethanol was 2.29 g/100 g corn stover with S. cerevisiae as the fermenting organism, whereas for the sample inoculated with E. coli K011, the ethanol production was 4.14 g/100 g corn stover. Corn stover treated with G. trabeum showed a conversion 1.90 and 4.79 g/100 g corn stover with S. cerevisiae and E. coli K011 as the fermenting organisms, respectively. Other fermentation co-products, such as acetic acid and lactic acid, were also monitored. Acetic acid production ranged between 0.45 and 0.78 g/100 g corn stover, while no lactic acid production was detected throughout the 5 days of SSF. The results of our experiment suggest that it is possible to perform SSF of corn stover using P. chrysosporium, G. trabeum, S. cerevisiae and E. coli K011 for the production of fuel ethanol.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.179-182
• /
• 2006

The effect of electron beam irradiation on dye sensitized solar cell (DSSC) has been studied to examine degradation of DSSC. The high-energy electron beam irradiation affects on the materials and performance of dye sensitized solar cells. We have checked the effects of electron beam irradiation of $TiO_2$ substrate with and without dye adsorption on the photovoltaic performances of resulting DSSCS and also studied the structural and electrical properties of polymers after irradiation. All solar cells materials were irradiated by electron beams with an energy source of 2MeV at different dose rates of 60 kGy, 120 kGy 240 kGy and 900 kGy and then their photoelectrical parameters were measured at 1 sun $(100 mW/cm^2)$. It was shown that the efficiency of DSSC was decreased as increasing the dose of e-beam irradiation due to lowering in $TiO_2$ crystallinity, decomposition of dye and oxidation of FTO glasses. On the other hand, the performance of solid-state DSSC with polyethylene oxide based electrolyte was improved after irradiation of e-beam due to enhancement of its conductivity and breakage of crosslinking.

• Journal of Electrochemical Science and Technology
• /
• 제12권1호
• /
• pp.126-136
• /
• 2021

The electrochemical performance of all-solid-state cells (ASSCs) based on sulfide electrolytes is critically affected by the undesirable interfacial reactions between oxide cathodes and sulfide electrolytes because of the high reactivity of sulfide electrolytes. Based on the concept that the interfacial reactions are highly dependent on the type of sulfide electrolyte, the electrochemical properties of the ASSCs prepared using three types of sulfide electrolytes were observed and compared. The Li2MoO4-LiI coating layer was also introduced to suppress the interfacial reactions. The cells using argyrodite electrolyte exhibited a higher capacity and Coulombic efficiency than the cells using 75Li2S-22P2S5-3Li2SO4 and Li7P3S11 electrolytes, indicating that the argyrodite electrolyte is less reactive with cathodes than other electrolytes. Moreover, the introduction of Li2MoO4-LiI coating on the cathode surface significantly enhanced the electrochemical performance of ASSCs because of the protection of coating layer. Pulverization of argyrodite electrolyte is also effective in increasing the capacity of cells because the smaller size of electrolyte particles improved the contact stability between the cathode and the sulfide electrolyte. The cyclic performance of cells was also enhanced by pulverized electrolyte, which is also associated with improved contact stability at the cathode/electrolyte. These results show that the introduction of Li2MoO4-LiI coating and the use of pulverized sulfide electrolyte can exhibit a synergic effect of suppressed interfacial reaction by the coating layer and improved contact stability owing to the small particle size of electrolyte.

• 한국표면공학회지
• /
• 제54권3호
• /
• pp.112-118
• /
• 2021

Dy³⁺- and Eu³⁺-codoped BaWO₄ phosphors for white light-emitting diode were synthesized with different activator ions via a solid-state reaction process. The structural, morphological, and optical properties of the BaWO₄:Dy³⁺,Eu³⁺ phosphors were investigated as a function of Eu³⁺ concentration at a fixed concentration of Dy³⁺ ions. XRD patterns exhibited that all the synthesized phosphors had a tetragonal system, irrespective of the concentrations of Dy³⁺ and Eu³⁺ ions. The excitation spectra of the synthesized phosphors were composed of three intense bands centered at 251, 355, and 393 nm and several weak peaks. For the BaWO₄:Dy³⁺,Eu³⁺ phosphors synthesized with 1 mol% of Eu³⁺, the emission spectra under ultraviolet excitation at 393 nm showed two strong blue and yellow bands at 485 and 577 nm corresponding to the ⁴F_9/2⁶H_15/2 and ⁴F_9/2⁶H_13/2 transitions of Dy³⁺ ions, respectively and several weak bands in the range of 600-700 nm resulting from the 4f transitions of Eu³⁺ ions. As the concentration of Eu³⁺ ions increased, intensities of the blue and yellow emission bands gradually decreased while those of the red emissions increased rapidly and the energy transfer efficiency from Dy³⁺ to Eu³⁺ ions was 95.3% at 20 mol% of Eu³⁺. The optimum white light emission with x=0.363, y=0.357 CIE 1931 chromaticity coordinates was obtained for the sample doped with 5 mol% Dy³⁺ and 1 mol% of Eu³⁺.

• 한국컴퓨터정보학회논문지
• /
• 제27권12호
• /
• pp.1-8
• /
• 2022

F2FS는 SSD(Solid State Drive)를 위한 파일시스템 중의 하나로서 리눅스 운영체제의 커널에 채용되어 널리 사용되고 있다. F2FS는 플래시 메모리의 특성을 반영하여 성능을 높이기 위한 여러 가지 방안들을 적용하였는데, 그 중의 하나가 파일별 데이터 블록들의 주소 정보를 관리하는 인덱스 구조의 개선이다. 본 논문에서는 F2FS의 인덱스 구조를 더욱 개선하여 성능을 높이는 방안을 제시하였다. F2FS는 모든 인덱스 블록들에 대하여 논리적 번호로 기록하고 이것을 물리적 번호로 매핑하는 테이블을 사용한다. 본 논문에서는 인덱스 블록들 중에서 끝단의 블록만 논리적 번호를 적용하고 앞단의 블록들은 물리적 번호를 직접 적용함으로써, 데이터 블록 접근시에 매핑 테이블을 검색하는 회수를 기존의 1~4회에서 1~2회로 줄일 수 있음을 보여주었다.

• 전기화학회지
• /
• 제21권4호
• /
• pp.80-87
• /
• 2018

웨어러블 디바이스, 전기자동차와 에너지저장시스템에 대한 전력 수요가 증가함에 따라 리튬이온 전지에 있어서 안전성은 가장 중요한 요소가 되었다. 이러한 문제를 해결하기 위해 가연성의 유기 액체전해질이 불연성의 고체전해질로 대체된 전고체 전지를 제조하려는 연구들이 진행되고 있다. 그러나 고체전해질은 자체 이온전도도가 상대적으로 낮고 전극/전해질 계면에서 높은 저항이 발생하므로 실질적인 활용에 제약이 있었다. 이에 유무기 소재로 구성된 복합전해질은 고체전해질의 단점을 극복할 수 있는 대안으로 떠오르고 있다. 본 연구에서는 PEO 전해질과 LLZO 고체전해질을 복합화하여 전해질을 제조하였고, LLZO 고체전해질 함량에 따라 결정성, 형상 및 전기화학 성능 분석을 진행하였다. 결과로부터 PEO 전해질 내에 LLZO 고체전해질의 최적 함량 및 균일한 분포가 전체 복합전해질의 이온전도도 향상에 중요한 요소임을 확인하였다.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2270-2275
• /
• 2011

The sintering behavior and microwave properties of ferrite ($Ba_3Co_{2-2x}Zn_{2x}Fe_{24}O_{41}$ ceramics) were investigated for microwave applications. Also PIFA type antenna with ferrite was simulated. All samples were prepared by the solid state reaction method and sintered at $1350^{\circ}C$. All ceramics had relatively density above of 92% compare with theoretical density of $Ba_3Co_2Fe_{24}O_{41}$ ceramics. From the XRD pattens, the Z-type phase was existed as main phase in $Ba_3Co_{2-2x}Zn_{2x}Fe_{24}O_{41}$ ceramics. The permittivity and permeability of $Ba_3Co_{2-2x}Zn_{2x}Fe_{24}O_{41}$ ceramics were increased with Zn additions and decreased rapidly over frequency of 200~600 MHz. Several PIFA type antennas with ferrite and FR4 were simulated. All antenna structure had return loss of less than -10 dB at each resonant frequency. Simulated antenna using both ferrite and FR4 showed size reduction of 25% without a significant decrement of efficiency.

• 한국전기전자재료학회논문지
• /
• 제29권7호
• /
• pp.404-407
• /
• 2016

In this study, to develop low temperature sintering capacitor composition ceramics with the good dielectric properties, $(Ba_{0.86}Ca_{0.14})(Ti_{0.85}Zr_{0.12}Sn_{0.03})O_3$ (BCTZ) ceramics were prepared by the conventional solid-state reaction method. The effects of $B_2O_3$ addition on the dielectric properties and microstructure was investigated. The XRD patterns demonstrated that all the specimens showed Perovskite phase, and secondary phases are indicated in the measurement range of XRD. And also, temperature coefficient of capacitance(TCC) of all the specimen sintered at $1,180^{\circ}C$ showed +3~-56% except for x=0.006. For all the specimens, observed one peak was tetragonal cubic difuse phase transition temperature(Tc), which is located in the vicinity of room temperature.

• 한국전기전자재료학회논문지
• /
• 제27권12호
• /
• pp.797-802
• /
• 2014

In this study, in order to develop the capacitor composition ceramics with the good dielectric properties, $(Ba_{1-x}Ca_x)(Ti_{0.85}Zr_{0.12}Sn_{0.03})O_3$ (abbreviated as BCTZ) ceramics were prepared by the conventional solid-state reaction method. The effects of Ca substitution on the microstructure and dielectric properties was investigated. The X-ray diffraction patterns demonstrated that all the specimens showed perovskite phase, and secondary phases are indicated in the measurement range of X-ray diffraction. Also, all the specimens indicated an rhombohedron phase structure. It was identified from the X-ray diffraction patterns that the secondary phase formed in grain boundaries and then decreased the dielectric properties. For all the specimens, observed one peak was tetragonal cubic phase transition temperature($T_c$), which is located in the vicinity of room temperature.

• ETRI Journal
• /
• 제37권1호
• /
• pp.147-156
• /
• 2015

A typical solid-state drive contains several independent channels that can be operated in parallel. To exploit this channel-level parallelism, a variety of works proposed to split consecutive write sequences into small segments and schedule them to different channels. This scheme exploits the parallelism but breaks the spatial locality of write traffic; thus, it is able to significantly degrade the efficiency of garbage collection. This paper proposes a channel-aware write reordering (CAWR) mechanism to schedule write requests to different channels more intelligently. The novel mechanism encapsulates correlated pages into a cluster beforehand. All pages belonging to a cluster are scheduled to the same channels to exploit spatial locality, while different clusters are scheduled to different channels to exploit the parallelism. As CAWR covers both garbage collection and I/O performance, it outperforms existing schemes significantly. Trace-driven simulation results demonstrate that the CAWR mechanism reduces the average response time by 26% on average and decreases the valid page copies by 10% on average, while achieving a similar hit ratio to that of existing mechanisms.