• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04b
• /
• pp.143-146
• /
• 2000

We studied effects of alkyl($C_nH_{2n+1}$) chain length on characteristics of poly(3-alkylthiophene) electroluminescent diodes. Among the poly(3-alkylthiophene), poly(3-hexylthiophene)(n=6) and poly(3- octyIthiophene)(n=8) were mainly used for the emitting layer of the diode. The result of experiment, the emission intensity of poly(3-alkylthiophene) electroluminescent diodes depends on the alkyl chain length. Strong emission is obtained from a poly(3-alkylthiophene) diodes of long alkyl side chain length. Emission intensities are enhanced by a confinement of carriers on a main chain with a long interchain distance caused by a long alkyl side chain.

• Electrical & Electronic Materials
• /
• v.10 no.8
• /
• pp.778-782
• /
• 1997

In this paper the electronic and optical properties of various poly(3-alkylthiophene)s differing in alkyl chain length were investigated. And their dependence on temperature were also investigated. The electrical conductivity decreased with the increase of alkyl chain length. In addition optical properties were changed due to the shift of edge energy which was caused by the change of the alkyl chain length and rise of temperature. The conformational change of poly(3-alkylthionphene) depending on the alkyl chain length is believed to be responsible to the change of electronic and optical properties of materials.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.1
• /
• pp.27-34
• /
• 2017

In this study, desorption characteristics of Cs from clay according to the hydrophobic alkyl chain length of the cationic surfactant were investigated. Alkyltrimethylammonium bromide was used as a cationic surfactant, and the length of the hydrophobic alkyl chain of the cationic surfactant was varied from -octyl to -cetyl. The adsorbed amount of the cationic surfactant on montmorillonite increased with the length of the hydrophobic alkyl chain, and intercalation of the cationic surfactant into the clay interlayer increased the interlayer distances. The Cs removal efficiency was also enhanced with increasing alkyl chain length, and the cationic surfactant with the cetyl group showed a maximum Cs removal efficiency of $992{\pm}2.9%$.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.40-47
• /
• 2015

Single-walled carbon nanotubes (SWNTs) was modified with various length of linear alkyl chains and passivated to form dielectric filler. The modified SWNTs embedded into epoxy matrix to fabricate a flexible composite with high dielectric constant. The dielectric behavior of the composite was significantly changed with various alkyl chain length(n) of pyrene. The dielectric constant of the epoxy/SWNTs composite significantly increased with respect to increase in length of alkyl chain at the frequency range from 10 to 105Hz (n=12and18).We also found that the passivated epoxy/SWNTs composite with high dielectric constant presented low dielectric loss. The resulted dielectric performances corresponded to de-bundling of nanotubes and their distribution behavior in the matrix in terms of tail length of alkyl pyrene in the passivation layer.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.1009-1011
• /
• 2009

Nano-structured conducting polypyrroles were synthesized in the ionic liquids (ILs) based on 1-alkyl-3-methylimidazolium family with tetrachloroferrate as an anion ($C_n\;mim\;[FeCl_4]\;with\;n\;=\;4,\;8,\;and\;12$). The polypyrrole nanostructures synthesized in ILs were formed as spherical shapes. For ionic liquids with alkyl side chain length $C_4,\;C_4\;mim\;[FeCl_4]$, the size of particles was ranged around 60-nm with a relatively narrow size distribution. As the length of alkyl chain increases, the particle sizes become larger and their distributions become wider. The self-assembled local structures in the solvent ionic liquids are likely to serve as templates of highly organized nano-structured polymers. The length of the alkyl chain in ionic liquids seems to affect these local structures.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1453-1455
• /
• 1996

The odd-even effect of the alkyl chain length of rubbed polyimide Langmuir-Blodgett (LB) surfaces on the extrapolation length of 5CB has been successfully evaluated for the first time by measuring polar anchoring strength. The extrapolation length of 5CB for rubbed PI-LB surfaces with even-numbers is small compared with odd-numbers for alkyl chain lengths of greater than 7 carbons. The extrapolation length of 5CB on rubbed PI-LB surfaces with odd-numbers increases gradually as the temperature increases but tends to diverge near the clearing temperature (Tc=$35.3^{\circ}C$). The extrapolation length diverges because of rapidly decreasing surface order near $T_c$. We suggest that the polar anchoring strength on rubbed PI-LB surfaces with even-number is strong because of relatively high surface ordering caused by more crystalline surfaces. Finally, we conclude that the odd-even effects of the polar anchoring strength in NLCs are strongly related to the character of the polymer and observed clearly for long alkyl chain lengths.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.3
• /
• pp.428-434
• /
• 2016

In this study, benzyltrialkylammonium chlorides with different alkyl chain length were synthesized and applied to liposome. Prepared cationic surfactant embedded liposomes were measured particle size, zetapotential, release property and antibacterial activity. The average particle size of liposomes was 120~140 nm. As alkyl chain length was increased, the liposome size was increased. Zetapotential for the solution of liposomes added cationic surfactants were in the range of +80~90 mV. In release test, collagen release rate could be controlled by alkyl chain length. liposome embedded long alkyl chain surfactant had enhanced sustained release property. Entrapment efficiency of hydrophilic collagen were 25.9~27.5%.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.10
• /
• pp.1531-1537
• /
• 2004

Twenty four thiol-functionalized ionic liquids based on imidazolium cation, 1-(12-mercaptododecyl)-3-alkylimidazolium salts, have been synthesized, and utilized to investigate the effects of alkyl-chain length and anion on the wettability of Au surfaces on the basis of self-assembled monolayers presenting [(CnSAMIM)X], where n = 1-6, X = Br, $BF_4$, $PF_4$ and $NTf_2$. Water wettabilities of the surfaces were measured as a water contact angle by contact angle goniometry. It was found that water wettability of the Au surfaces coated with imidazolium ions was largely dependent not only on counter anions but also on the length of alkyl chains. In the case of SAMs of N-alkylimidazolium ions having short length of N-alkyl chain (C1-$C_4$), anions played great role in determining water wettability of the surfaces.

• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.451-456
• /
• 1994

Alkyl polyglucosides (APG), so called natural nonionic surfactants, are prepared with glucose from corn starch and fatty alcohol from palm and/or coconut oil. When we studied on interfacial properties of APG, surface and interfacial tension, cmc, foaming and effectiveness, according to degree of polymerization of glucose unit (D.P.=1.2~1.8) and alkyl chain length, the former hardly affects but the latter greatly affects on them. The order of detergency for fatty acid soils decreased as followings ; APG 0814> APG 1214> APG 10> APG 0810> APG 08, and the samples with lowest interfacial tension and maximum adsorption had a better detergency.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.12 no.1
• /
• pp.69-74
• /
• 1999

We have investigated that the high pretilt angle of the NLC, 4-n-pentyl-4-cyanobiphenyl (5CB), was observed on rubbed polythiophene (PTP) surfaces with alkyl chains with more than 10 carbon atoms; it is attributed to the surface-excluded volume effect by the alkyl chain lengths between the LCs and the PTP surfaces. Next, we investigated that the odd-even effect of the polar anchoring strength in 5CB on rubbed PTP surfaces with alkyl chain lengths has been successfully evaluated. The anchoring strength of 5CB for rubbed PTP surfaces with odd-number is weak compared with even-number up to the 6 carbon atoms in the alkyl chain; however, odd-number is strong compared with even-number above 7 carbon atoms. The weak anchoring strength of 5CB is approximately $1\times10^{-3} (J/m^2$) on rubbed PTP surface with 7 carbon atoms; it is relatively strong anchoring strength. Consequently, we conclude that the odd-even effects of the polar anchoring strength in NLCs are strongly related to the characteristics of the polymer and observed clearly for short alkyl chain lengths.