• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04b
• /
• pp.143-146
• /
• 2000

We studied effects of alkyl($C_nH_{2n+1}$) chain length on characteristics of poly(3-alkylthiophene) electroluminescent diodes. Among the poly(3-alkylthiophene), poly(3-hexylthiophene)(n=6) and poly(3- octyIthiophene)(n=8) were mainly used for the emitting layer of the diode. The result of experiment, the emission intensity of poly(3-alkylthiophene) electroluminescent diodes depends on the alkyl chain length. Strong emission is obtained from a poly(3-alkylthiophene) diodes of long alkyl side chain length. Emission intensities are enhanced by a confinement of carriers on a main chain with a long interchain distance caused by a long alkyl side chain.

• Electrical & Electronic Materials
• /
• v.10 no.8
• /
• pp.778-782
• /
• 1997

In this paper the electronic and optical properties of various poly(3-alkylthiophene)s differing in alkyl chain length were investigated. And their dependence on temperature were also investigated. The electrical conductivity decreased with the increase of alkyl chain length. In addition optical properties were changed due to the shift of edge energy which was caused by the change of the alkyl chain length and rise of temperature. The conformational change of poly(3-alkylthionphene) depending on the alkyl chain length is believed to be responsible to the change of electronic and optical properties of materials.

• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.451-456
• /
• 1994

Alkyl polyglucosides (APG), so called natural nonionic surfactants, are prepared with glucose from corn starch and fatty alcohol from palm and/or coconut oil. When we studied on interfacial properties of APG, surface and interfacial tension, cmc, foaming and effectiveness, according to degree of polymerization of glucose unit (D.P.=1.2~1.8) and alkyl chain length, the former hardly affects but the latter greatly affects on them. The order of detergency for fatty acid soils decreased as followings ; APG 0814> APG 1214> APG 10> APG 0810> APG 08, and the samples with lowest interfacial tension and maximum adsorption had a better detergency.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.12 no.1
• /
• pp.69-74
• /
• 1999

We have investigated that the high pretilt angle of the NLC, 4-n-pentyl-4-cyanobiphenyl (5CB), was observed on rubbed polythiophene (PTP) surfaces with alkyl chains with more than 10 carbon atoms; it is attributed to the surface-excluded volume effect by the alkyl chain lengths between the LCs and the PTP surfaces. Next, we investigated that the odd-even effect of the polar anchoring strength in 5CB on rubbed PTP surfaces with alkyl chain lengths has been successfully evaluated. The anchoring strength of 5CB for rubbed PTP surfaces with odd-number is weak compared with even-number up to the 6 carbon atoms in the alkyl chain; however, odd-number is strong compared with even-number above 7 carbon atoms. The weak anchoring strength of 5CB is approximately $1\times10^{-3} (J/m^2$) on rubbed PTP surface with 7 carbon atoms; it is relatively strong anchoring strength. Consequently, we conclude that the odd-even effects of the polar anchoring strength in NLCs are strongly related to the characteristics of the polymer and observed clearly for short alkyl chain lengths.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1305-1308
• /
• 2010

Regioselective perfluorinated isoxazolidine (5 and 7), isoxazoline (9) and 1,2-addition products (6 and 8) having a long alkyl chain functionality have been prepared by 1,3-dipolar cycloaddition between a 1,3-dipole (NH-nitrone or nitrile oxide) and dipolarophile (perfluoro-2-methyl-2-pentene or styrene), respectively. Interestingly, unusual extended conjugated form of isoxazoline adduct (10) was obtained by dehydrofluorinated reaction from the corresponding perfluorinated isoxazoline adduct (9) which was derived from cycloadition between the perfluorinated long alkyl nitrile oxide 1,3-diplole and styrene olefin. This synthetic methodology of heterocyclic compound having a long alkyl chain functionality is useful for the designing of synthetic strategy and potential self-assembled monolayers (SAM) application. These derivatives were characterized by IR, $^1H$ and $^{19}F$ NMR, and MASS analysis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.127-129
• /
• 1997

The high pretilt angles in nematic liquid crystals (NLCs) have been generated on robbed polythiophene (PTP) surfaces with alkyl chain lengths. The pretilt angle of the NLC was observed on unidirectionally rubbed PTP surfaces with alkyl chains with more than 9 carbon atoms. We obtained the Pretilt angle of 15~40$^{\circ}$ on rubbed PTP surfaces with 10 carbon atoms in the a1ky1 chain. Also, the pretilt angles of 65~80$^{\circ}$ of NLC were obtained on rubbed PTP surfaces with 11 and 12 carbon atoms in the alkyl chain. We suggest that this high pretilt angle generation in NLC is due to the surface-excluded volume effect by the alkyl chain lengths between. the LCs and the PTP surfaces. Finally, we conclude the odd-even effect on rubbed PTP surfaces is clearly contributed to the pretilt angle generation.

• YAKHAK HOEJI
• /
• v.53 no.5
• /
• pp.281-285
• /
• 2009

The retention of solutes in reversed-phase high-performance liquid chromatography depends on their hydrophobicity. Although the retention behaviors of alkyl benzenes have been reported so far, quite a few authors have mentioned the retention behavior of alkyl benzenes with plural hydrophobicity parameters. In this sense, we were interested in the retention behaviors of alkyl benzenes having benzene moiety and increasing alkyl chain. In this study, we therefore investigated the retention behavior of alkyl benzenes in reversed-phase high-performance liquid chromatography in order to obtain information concerning the effects of the aromatic moiety and the carbon chain on the retention mechanism by comparing their capacity factor (k') in relation to the carbon chain length. The eluent acetonitrile ($CH_3CN$) showed high selectivity on alkyl benzenes, showing the high difference of capacity factor (${\Delta}log\;k'$) between toluene and octyl benzene. Indeed, the ${\Delta}log\;k'$ of 80% $CH_3CN$ represented 1.42- and 4.25-times longer than 90% MeOH and 60% THF, respectively. The hydrophobicity parameters, van der Waals volume, bond constant, partition constant, $\pi$-energy effect and enthalpy were evaluated with the capacity factor (k') of alkyl benzenes eluted on 80% CH3CN, 90% MeOH and 60% THF, respectively. The best eluent for predicting retention behavior of alkyl benzenes was 90% MeOH ($R^2$ 0.999). The three parameters, van der Waals volume, bond constant and partition constant were well coincident to log k' by increasing alkyl benzenes. However, $\pi$-energy effect and enthalpy were severely disagreeable. Taken together, van der Waals volume, bond constant and partition constant were a reliable parameters to predict the retention behaviors of alkyl benzenes on reversed-phase column.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.404-406
• /
• 1998

Analysis for the imidazoline type cationic surfactants was performed by the gas chromatography(GC) and high performance liquid chromatography(HPLC). The composition of the alkyl chain distribution was investigated by GC after base/Acid hydrolysis of the imidazoline ring. The distribution of total alkyl chain was separated clearly by a Bondclone C18/NOVA-Pak C18 HPLC column using 50% acetonitrile in methanol containing 0.1M sodium perchlorate as a mobile phase. Alkyl chain distribution and average molecular weight of imidazoline type cationic surfactants were obtained based on these analytical methods. The agreement of results from GC and HPLC was good. The detection limit of imidazoline by HPLC method was 10ng without pretreatment.

• Journal of the Korean Applied Science and Technology
• /
• v.11 no.1
• /
• pp.61-70
• /
• 1994

New anionic oligomeric surfactants, sodium bis(alkyl decaoxyethylene) sulfonated succinates, had been synthesized through the addition reaction of sodium hydrogen sulfite to bis(alkyl decaoxyethylene) maleates. Bis(alkyl decaoxyethylene) maleates were obtained by esterification with maleic anhydride and long chain alkyl decaoxyethylene ethers which were also obtained by addition ethylene oxide 10 mole to straight long chain alcohol with alkyl group having from 10 to 18 carbon atoms, their structure of the synthetic compounds have been characterized with IR. $^{1}H$ NMR and elemental analysis respectively.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.2
• /
• pp.268-276
• /
• 2023

Alkyl butyrate with fruity flavor is known as an important additive in the food industry. We synthesized various alkyl butyrates from various fatty alcohol and butyric acid using immobilized Rhodococcus cutinase (Rcut). Esterification reaction was performed in a non-aqueous system including heptane, isooctane, hexane, and cyclohexane. As a result of performing the alkyl butyrate synthesis reaction using alcohols of various chain lengths, it was found that the preference for the alcohol substrate had the following order: C6 > C4 > C8 > C10 > C2. Through molecular docking analysis, it was found that the greater the hydrophobicity of alcohol, the higher the accessibility to the active site of the enzyme. However, since the number of torsions increased as the chain length increased, it became difficult for the hydroxyl oxygen of the alcohol to access the ^γO of serine at the enzyme active site. These molecular docking results were consistent with substrate preference results of the Rcut enzyme. The Rcut maintained the synthesis efficiency at least for 5 days in isooctane solvent. We synthesized as much as 452 mM butyl butyrate by adding 100 mM substrate daily for 5 days and performing the reaction. These results show that Rcut is an efficient enzyme for producing alkyl butyrate used in the food industry.